[SeaBIOS] [PATCH 01/20] seabios: make mttr UC area setup dynamic
Gerd Hoffmann
kraxel at redhat.com
Wed Nov 28 10:17:30 CET 2012
From: Jason Baron <jbaron at redhat.com>
Set up the UC area of mtrr dynamically based on mtrr_base. This allows
the bios to work for other chipsets that might want to set the mtrr.
Since BUILD_MAX_HIGHMEM is no longer used we can remove the config parameter.
This change reverses the order of pci_setup() and smm_init() with
mtrr_setup().
Signed-off-by: Jason Baron <jbaron at redhat.com>
---
src/config.h | 1 -
src/mtrr.c | 5 +++--
src/post.c | 6 +++---
3 files changed, 6 insertions(+), 6 deletions(-)
diff --git a/src/config.h b/src/config.h
index 0d4066d..71c0b7e 100644
--- a/src/config.h
+++ b/src/config.h
@@ -44,7 +44,6 @@
#define BUILD_SMM_INIT_ADDR 0x38000
#define BUILD_SMM_ADDR 0xa8000
#define BUILD_SMM_SIZE 0x8000
-#define BUILD_MAX_HIGHMEM 0xe0000000
#define BUILD_PCIMEM_START 0xe0000000
#define BUILD_PCIMEM_END 0xfec00000 /* IOAPIC is mapped at */
diff --git a/src/mtrr.c b/src/mtrr.c
index 0957834..2cbf234 100644
--- a/src/mtrr.c
+++ b/src/mtrr.c
@@ -7,6 +7,7 @@
#include "util.h" // dprintf
#include "config.h" // CONFIG_*
#include "xen.h" // usingXen
+#include "pci.h" // pcimem_start
#define MSR_MTRRcap 0x000000fe
#define MSR_MTRRfix64K_00000 0x00000250
@@ -94,9 +95,9 @@ void mtrr_setup(void)
wrmsr_smp(MTRRphysMask_MSR(i), 0);
}
/* Mark 3.5-4GB as UC, anything not specified defaults to WB */
- wrmsr_smp(MTRRphysBase_MSR(0), BUILD_MAX_HIGHMEM | MTRR_MEMTYPE_UC);
+ wrmsr_smp(MTRRphysBase_MSR(0), pcimem_start | MTRR_MEMTYPE_UC);
wrmsr_smp(MTRRphysMask_MSR(0)
- , (-((1ull<<32)-BUILD_MAX_HIGHMEM) & phys_mask) | 0x800);
+ , (-((1ull<<32)-pcimem_start) & phys_mask) | 0x800);
// Enable fixed and variable MTRRs; set default type.
wrmsr_smp(MSR_MTRRdefType, 0xc00 | MTRR_MEMTYPE_WB);
diff --git a/src/post.c b/src/post.c
index 0133f75..ffb4717 100644
--- a/src/post.c
+++ b/src/post.c
@@ -232,13 +232,13 @@ maininit(void)
timer_setup();
mathcp_setup();
- // Initialize mtrr
- mtrr_setup();
-
// Initialize pci
pci_setup();
smm_init();
+ // Initialize mtrr
+ mtrr_setup();
+
// Setup Xen hypercalls
xen_init_hypercalls();
--
1.7.1
More information about the SeaBIOS
mailing list