[SeaBIOS] [seabios patch 1/5] pci: init all devices
Kevin O'Connor
kevin at koconnor.net
Sat May 12 20:16:57 CEST 2012
On Fri, May 04, 2012 at 05:35:10PM +0200, Gerd Hoffmann wrote:
> On 05/04/12 15:15, Kevin O'Connor wrote:
> > On Fri, May 04, 2012 at 10:21:23AM +0200, Gerd Hoffmann wrote:
> >> seabios used to initialize root bus devices only, with this patch
> >> devices behind pci bridges are initialized too. This allows to boot
> >> from virtio devices behind pci bridges.
> >>
> >> Signed-off-by: Gerd Hoffmann <kraxel at redhat.com>
> >> ---
> >> src/pciinit.c | 3 ---
> >> 1 files changed, 0 insertions(+), 3 deletions(-)
> >>
> >> diff --git a/src/pciinit.c b/src/pciinit.c
> >> index 25b04ac..6a7a0d2 100644
> >> --- a/src/pciinit.c
> >> +++ b/src/pciinit.c
> >> @@ -213,9 +213,6 @@ static void pci_bios_init_devices(void)
> >> {
> >> struct pci_device *pci;
> >> foreachpci(pci) {
> >> - if (pci_bdf_to_bus(pci->bdf) != 0)
> >> - // Only init devices on host bus.
> >> - break;
> >
> > I think this will then assign an incorrect PCI_INTERRUPT_LINE value to
> > non root bus devices.
>
> Attached patch should fix it if I read the specs correctly.
I committed this patch.
-Kevin
More information about the SeaBIOS
mailing list