[SeaBIOS] [Qemu-devel] [RFC PATCH v2 09/21] pc: Add dimm paravirt SRAT info

Blue Swirl blauwirbel at gmail.com
Thu Jul 12 21:48:04 CEST 2012


On Wed, Jul 11, 2012 at 10:31 AM, Vasilis Liaskovitis
<vasilis.liaskovitis at profitbricks.com> wrote:
> The numa_fw_cfg paravirt interface is extended to include SRAT information for
> all hotplug-able dimms. There are 3 words for each hotplug-able memory slot,
> denoting start address, size and node proximity. The new info is appended after
> existing numa info, so that the fw_cfg layout does not break.  This information
> is used by Seabios to build hotplug memory device objects at runtime.
> nb_numa_nodes is set to 1 by default (not 0), so that we always pass srat info
> to SeaBIOS.
>
> v1->v2:
> Dimm SRAT info (#dimms) is appended at end of existing numa fw_cfg in order not
> to break existing layout
> Documentation of the new fwcfg layout is included in docs/specs/fwcfg.txt
>
> Signed-off-by: Vasilis Liaskovitis <vasilis.liaskovitis at profitbricks.com>
> ---
>  docs/specs/fwcfg.txt |   28 ++++++++++++++++++++++++++
>  hw/pc.c              |   53 ++++++++++++++++++++++++++++++++++++++++++++++++-
>  vl.c                 |    2 +-
>  3 files changed, 80 insertions(+), 3 deletions(-)
>  create mode 100644 docs/specs/fwcfg.txt
>
> diff --git a/docs/specs/fwcfg.txt b/docs/specs/fwcfg.txt
> new file mode 100644
> index 0000000..e6fcd8f
> --- /dev/null
> +++ b/docs/specs/fwcfg.txt
> @@ -0,0 +1,28 @@
> +QEMU<->BIOS Paravirt Documentation
> +--------------------------------------
> +
> +This document describes paravirt data structures passed from QEMU to BIOS.
> +
> +fw_cfg SRAT paravirt info
> +--------------------
> +The SRAT info passed from QEMU to BIOS has the following layout:
> +
> +-----------------------------------------------------------------------------------------------
> +#nodes | cpu0_pxm | cpu1_pxm | ... | cpulast_pxm | node0_mem | node1_mem | ... | nodelast_mem
> +
> +-----------------------------------------------------------------------------------------------
> +#dimms | dimm0_start | dimm0_sz | dimm0_pxm | ... | dimmlast_start | dimmlast_sz | dimmlast_pxm
> +
> +Entry 0 contains the number of numa nodes (nb_numa_nodes).
> +
> +Entries 1..max_cpus: The next max_cpus entries describe node proximity for each
> +one of the vCPUs in the system.
> +
> +Entries max_cpus+1..max_cpus+nb_numa_nodes+1:  The next nb_numa_nodes entries
> +describe the memory size for each one of the NUMA nodes in the system.
> +
> +Entry max_cpus+nb_numa_nodes+1 contains the number of memory dimms (nb_hp_dimms)
> +
> +The last 3 * nb_hp_dimms entries are organized in triplets: Each triplet contains
> +the physical address offset, size (in bytes), and node proximity for the
> +respective dimm.

The size and endianness are not specified, you are using LE 64 bit
values for each item.

> diff --git a/hw/pc.c b/hw/pc.c
> index ef9901a..cf651d0 100644
> --- a/hw/pc.c
> +++ b/hw/pc.c
> @@ -598,12 +598,15 @@ int e820_add_entry(uint64_t address, uint64_t length, uint32_t type)
>      return index;
>  }
>
> +static void setup_hp_dimms(uint64_t *fw_cfg_slots);
> +
>  static void *bochs_bios_init(void)
>  {
>      void *fw_cfg;
>      uint8_t *smbios_table;
>      size_t smbios_len;
>      uint64_t *numa_fw_cfg;
> +    uint64_t *hp_dimms_fw_cfg;
>      int i, j;
>
>      register_ioport_write(0x400, 1, 2, bochs_bios_write, NULL);
> @@ -638,8 +641,10 @@ static void *bochs_bios_init(void)
>      /* allocate memory for the NUMA channel: one (64bit) word for the number
>       * of nodes, one word for each VCPU->node and one word for each node to
>       * hold the amount of memory.
> +     * Finally one word for the number of hotplug memory slots and three words
> +     * for each hotplug memory slot (start address, size and node proximity).
>       */
> -    numa_fw_cfg = g_malloc0((1 + max_cpus + nb_numa_nodes) * 8);
> +    numa_fw_cfg = g_malloc0((2 + max_cpus + nb_numa_nodes + 3 * nb_hp_dimms) * 8);
>      numa_fw_cfg[0] = cpu_to_le64(nb_numa_nodes);
>      for (i = 0; i < max_cpus; i++) {
>          for (j = 0; j < nb_numa_nodes; j++) {
> @@ -652,8 +657,15 @@ static void *bochs_bios_init(void)
>      for (i = 0; i < nb_numa_nodes; i++) {
>          numa_fw_cfg[max_cpus + 1 + i] = cpu_to_le64(node_mem[i]);
>      }
> +
> +    numa_fw_cfg[1 + max_cpus + nb_numa_nodes] = cpu_to_le64(nb_hp_dimms);
> +
> +    hp_dimms_fw_cfg = numa_fw_cfg + 2 + max_cpus + nb_numa_nodes;
> +    if (nb_hp_dimms)
> +        setup_hp_dimms(hp_dimms_fw_cfg);

Braces.

> +
>      fw_cfg_add_bytes(fw_cfg, FW_CFG_NUMA, (uint8_t *)numa_fw_cfg,
> -                     (1 + max_cpus + nb_numa_nodes) * 8);
> +                     (2 + max_cpus + nb_numa_nodes + 3 * nb_hp_dimms) * 8);
>
>      return fw_cfg;
>  }
> @@ -1223,3 +1235,40 @@ target_phys_addr_t pc_set_hp_memory_offset(uint64_t size)
>
>      return ret;
>  }
> +
> +static void setup_hp_dimms(uint64_t *fw_cfg_slots)
> +{
> +    int i = 0;
> +    Error *err = NULL;
> +    DeviceState *dev;
> +    DimmState *slot;
> +    const char *type;
> +    BusChild *kid;
> +    BusState *bus = sysbus_get_default();
> +
> +    QTAILQ_FOREACH(kid, &bus->children, sibling) {
> +        dev = kid->child;
> +        type = object_property_get_str(OBJECT(dev), "type", &err);
> +        if (err) {
> +            error_free(err);
> +            fprintf(stderr, "error getting device type\n");
> +            exit(1);
> +        }
> +
> +        if (!strcmp(type, "dimm")) {
> +            if (!dev->id) {
> +                fprintf(stderr, "error getting dimm device id\n");
> +                exit(1);
> +            }
> +            slot = DIMM(dev);
> +            /* determine starting physical address for this memory slot */
> +            assert(slot->start);
> +            fw_cfg_slots[3 * slot->idx] = cpu_to_le64(slot->start);
> +            fw_cfg_slots[3 * slot->idx + 1] = cpu_to_le64(slot->size);
> +            fw_cfg_slots[3 * slot->idx + 2] = cpu_to_le64(slot->node);
> +            i++;
> +        }
> +    }
> +    assert(i == nb_hp_dimms);
> +}
> +
> diff --git a/vl.c b/vl.c
> index 0ff8818..37c9798 100644
> --- a/vl.c
> +++ b/vl.c
> @@ -2335,7 +2335,7 @@ int main(int argc, char **argv, char **envp)
>          node_cpumask[i] = 0;
>      }
>
> -    nb_numa_nodes = 0;
> +    nb_numa_nodes = 1;
>      nb_nics = 0;
>
>      autostart= 1;
> --
> 1.7.9
>
>



More information about the SeaBIOS mailing list