[SeaBIOS] [RFC PATCH v2 16/21] acpi_piix4: Update dimm state on VM reboot

Vasilis Liaskovitis vasilis.liaskovitis at profitbricks.com
Wed Jul 11 12:32:01 CEST 2012


in case of hot-remove or hot-add failure, the dimm bitmaps in qemu and Seabios
are inconsistent with the true state of the DIMM devices. The "populated" field
of the DimmState reflects the true state of the device. This inconsistency means
that a failed operation cannot be retried.

Ths patch updates the bit array to the true state of the dimms on VM reboot.
This allows retry of failed hot-add or hot-remove operations after a reboot.

Retrying a failed hot operation is not yet possible before reboot (the following
patch removes this limitation for guests with _OST acpi support)

Signed-off-by: Vasilis Liaskovitis <vasilis.liaskovitis at profitbricks.com>
---
 hw/acpi_piix4.c |   25 +++++++++++++++++++++++++
 1 files changed, 25 insertions(+), 0 deletions(-)

diff --git a/hw/acpi_piix4.c b/hw/acpi_piix4.c
index d8e2c22..ebc5de7 100644
--- a/hw/acpi_piix4.c
+++ b/hw/acpi_piix4.c
@@ -91,6 +91,7 @@ typedef struct PIIX4PMState {
 } PIIX4PMState;
 
 static void piix4_acpi_system_hot_add_init(PCIBus *bus, PIIX4PMState *s);
+static void piix4_dimm_state_sync(PIIX4PMState *s);
 
 #define ACPI_ENABLE 0xf1
 #define ACPI_DISABLE 0xf0
@@ -369,6 +370,7 @@ static void piix4_reset(void *opaque)
         /* Mark SMM as already inited (until KVM supports SMM). */
         pci_conf[0x5B] = 0x02;
     }
+    piix4_dimm_state_sync(s);
     piix4_update_hotplug(s);
 }
 
@@ -671,6 +673,29 @@ static int piix4_dimm_hotplug(DeviceState *qdev, SysBusDevice *dev, int
     return 0;
 }
 
+void piix4_dimm_state_sync(PIIX4PMState *s)
+{
+    struct gpe_regs *g = &s->gperegs;
+    DimmState *slot = NULL;
+    uint32_t i, temp = 1;
+
+    for(i = 0; i < MAX_DIMMS; i++) {
+        slot = dimm_find_from_idx(i);
+        if (!slot)
+            break;
+        if (i % 8 == 0) {
+            temp = 1;
+            g->mems_sts[i / 8] = 0;
+        }
+        else
+            temp = temp << 1;
+        if (slot->populated) {
+            g->mems_sts[i / 8] |= temp;
+        }
+        slot->pending = false;
+    }
+}
+
 static int piix4_device_hotplug(DeviceState *qdev, PCIDevice *dev,
 				PCIHotplugState state)
 {
-- 
1.7.9




More information about the SeaBIOS mailing list