[SeaBIOS] Error booting from USB Storage Device in QEMU-KVM GIT MASTER

Thu Jan 19 14:01:53 CET 2012

 Hi All,

 After booting KVM using the flash image as both a regular disk and a 
 usb storage device.. /dev/sda is detected from ata1.00 and /dev/sdb is 
 detected from usb-storage-1-1:1.0.  Both /dev/sdX devices are the same 
 disk / partition layout.

 ---
 Thanks,
 Dyweni

 On Thu, 19 Jan 2012 06:57:59 -0600, Dyweni - Qemu-Devel wrote:

> Hi,
>
> I am unable to boot KVM using a usb flash drive. I'm using QEMU-KVM
> built
> from GIT MASTER as of this morning.
>
> Here's my QEMU-KVM startup options:
>
> qemu-system-x86_64
> -curses
> -m 512
> -snapshot
> -device piix3-usb-uhci
> -drive id=usbflash,file=flash.img,if=none,boot=on,cache=writeback
> -device usb-storage,drive=usbflash
> -net nic,macaddr=$(getmacpublic),vlan=0 -net
> tap,vlan=0,ifname=$publictap,script=no
> -net nic,macaddr=$(getmacprivate),vlan=1 -net
> tap,vlan=1,ifname=$privatetap,script=no
> $*
>
> Here's the debugging output from SeaBIOS. (Notice the 'Unable to
> configure USB MSC device.' message):
>
> + qemu-system-x86_64 -m 512 -snapshot -device piix3-usb-uhci -drive
> id=usbflash,file=flash.img,if=none,boot=on,cache=writeback -device
> usb-storage,drive=usbflash -net nic,macaddr=00:AA:00:AA:62:AA,vlan=0
> -net tap,vlan=0,ifname=tap0,script=no -net
> nic,macaddr=00:AA:00:D2:D1:BB,vlan=1 -net
> tap,vlan=1,ifname=tap1,script=no -chardev stdio,id=seabios -device
> isa-debugcon,iobase=0x402,chardev=seabios
> qemu-kvm: boot=on|off is deprecated and will be ignored. Future
> versions will reject this parameter. Please update your scripts.
> Start bios (version 1.6.3)
> Ram Size=0x20000000 (0x0000000000000000 high)
> Relocating init from 0x000e3b20 to 0x1ffe12e0 (size 60412)
> CPU Mhz=3601
> === PCI bus & bridge init ===
> PCI: pci_bios_init_bus_rec bus = 0x0
> === PCI device probing ===
> Found 8 PCI devices (max PCI bus is 00)
> === PCI new allocation pass #1 ===
> PCI: check devices bus 0
> === PCI new allocation pass #2 ===
> PCI: init bases bus 0 (primary)
> type io max 100 sum 230 base c000
> size 100: 2 bar(s), c000 -> c1ff
> size 20: 1 bar(s), c200 -> c21f
> size 10: 1 bar(s), c220 -> c22f
> type mem max 10000 sum 33000 base febc0000
> size 10000: 3 bar(s), febc0000 -> febeffff
> size 1000: 3 bar(s), febf0000 -> febf2fff
> type prefmem max 2000000 sum 2000000 base fc000000
> size 2000000: 1 bar(s), fc000000 -> fdffffff
> PCI: map device bus 0, bfd 0x0
> PCI: map device bus 0, bfd 0x8
> PCI: map device bus 0, bfd 0x9
> bar 4, addr c220, size 10 [io]
> PCI: map device bus 0, bfd 0xb
> PCI: map device bus 0, bfd 0x10
> bar 0, addr fc000000, size 2000000 [mem]
> bar 1, addr febf0000, size 1000 [mem]
> bar 6, addr febc0000, size 10000 [mem]
> PCI: map device bus 0, bfd 0x18
> bar 0, addr c000, size 100 [io]
> bar 1, addr febf1000, size 100 [mem]
> bar 6, addr febd0000, size 10000 [mem]
> PCI: map device bus 0, bfd 0x20
> bar 0, addr c100, size 100 [io]
> bar 1, addr febf2000, size 100 [mem]
> bar 6, addr febe0000, size 10000 [mem]
> PCI: map device bus 0, bfd 0x28
> bar 4, addr c200, size 20 [io]
> PCI: bus=0 devfn=0x00: vendor_id=0x8086 device_id=0x1237
> PCI: bus=0 devfn=0x08: vendor_id=0x8086 device_id=0x7000
> PCI: bus=0 devfn=0x09: vendor_id=0x8086 device_id=0x7010
> PCI: bus=0 devfn=0x0b: vendor_id=0x8086 device_id=0x7113
> PCI: bus=0 devfn=0x10: vendor_id=0x1013 device_id=0x00b8
> PCI: bus=0 devfn=0x18: vendor_id=0x10ec device_id=0x8139
> PCI: bus=0 devfn=0x20: vendor_id=0x10ec device_id=0x8139
> PCI: bus=0 devfn=0x28: vendor_id=0x8086 device_id=0x7020
> PIIX3/PIIX4 init: elcr=00 0c
>
> Found 1 cpu(s) max supported 1 cpu(s)
> MP table addr=0x000fd620 MPC table addr=0x000fd630 size=240
> SMBIOS ptr=0x000fd600 table=0x000fd4f0 size=263
> ACPI tables: RSDP=0x000fd4c0 RSDT=0x1fffd7b0
> Scan for VGA option rom
> Running option rom at c000:0003
> Turning on vga text mode console
> SeaBIOS (version 1.6.3)
>
> UHCI init on dev 00:05.0 (io=c200)
> Found 1 lpt ports
> Found 1 serial ports
> ATA controller 1 at 1f0/3f4/0 (irq 14 dev 9)
> ATA controller 2 at 170/374/0 (irq 15 dev 9)
> DVD/CD [ata1-0: QEMU DVD-ROM ATAPI-4 DVD/CD]
> Searching bootorder for: /pci at i0cf8/*@1,1/drive at 1/disk at 0
> ebda moved from 9fc00 to 9f800
> USB MSC vendor='QEMU' product='QEMU HARDDISK' rev='1.0.' type=0
> removable=0
> Unable to configure USB MSC device.
> PS2 keyboard initialized
> All threads complete.
> Scan for option roms
> Running option rom at c900:0003
> pmm call arg1=1
> pmm call arg1=0
> pmm call arg1=1
> pmm call arg1=0
> Running option rom at ca00:0003
> pmm call arg1=1
> pmm call arg1=1
> Searching bootorder for: /pci at i0cf8/*@3
> Searching bootorder for: /pci at i0cf8/*@4
> Searching bootorder for: /rom at genroms/vapic.bin
> Running option rom at cb00:0003
> ebda moved from 9f800 to 9f000
> Returned 53248 bytes of ZoneHigh
> e820 map has 7 items:
> 0: 0000000000000000 - 000000000009f000 = 1 RAM
> 1: 000000000009f000 - 00000000000a0000 = 2 RESERVED
> 2: 00000000000f0000 - 0000000000100000 = 2 RESERVED
> 3: 0000000000100000 - 000000001fffd000 = 1 RAM
> 4: 000000001fffd000 - 0000000020000000 = 2 RESERVED
> 5: 00000000feffc000 - 00000000ff000000 = 2 RESERVED
> 6: 00000000fffc0000 - 0000000100000000 = 2 RESERVED
> enter handle_19:
> NULL
> Booting from DVD/CD...
> Device reports MEDIUM NOT PRESENT
> atapi_is_ready returned -1
> Boot failed: Could not read from CDROM (code 0003)
> enter handle_18:
>
> NULL
> Booting from ROM...
> Booting from c900:0372
> enter handle_18:
> NULL
> Booting from ROM...
> Booting from ca00:0372
> In resume (status=0)
> In 32bit resume
> Attempting a hard reboot
>
> --
> Thanks,
> Dyweni