[SeaBIOS] Issues with ASRock E350M1
Scott Duplichan
scott at notabs.org
Sun Jun 5 09:46:45 CEST 2011
Marshall Buschman wrote:
]Or not! It's back. Same issue as before.
]
]Quoting mbuschman at lucidmachines.com:
]
]> Mystery solved - the drive's shipping firmware was causing this
]> behavior - an upgrade to the latest firmware (2.0) resolves this.
]>
]> Thanks!
]> -Marshall Buschman
]>
]> Quoting mbuschman at lucidmachines.com:
]>
]>> I should mention that a 16gb Kingston SSD I have works just fine,
]>> as well as a 500gb traditional hard disk.
]>> Looks like this might be a problem with the disk itself. I know the
]>> Sandforce controllers do all kinds of "smart" things like
]>> compressing data to achieve greater throughput. I'll investigate
]>> and see what I can find.
Hello Marshall,
An SSD drive I bought for boot time testing also has the
SandForce sf-1200 controller:
http://www.mushkin.com/Digital-Storage/SSDs/MKNSSDCL40GB-DX.aspx
I have not noticed any detection problem with it. Let me know
if there is any experiment I could do with it.
Thanks,
Scott
More information about the SeaBIOS
mailing list