[SeaBIOS] Graphics card pass-through working with two pass pci-initialization

[Avi Kivity]

On 06/01/2011 12:56 PM, Alexander Graf wrote:
> On 01.06.2011, at 09:30, Gerd Hoffmann wrote:
>
> >   Hi,
> >
> >>  0xE0000000 is hard-coded in the DSDT for both piix and q35 as below.
> >>  If the range is determined dynamically, the area also needs to be
> >>  updated somehow dynamically.
> >>
> >>  ...
> >>              Name (_CRS, ResourceTemplate ()
> >>  ...
> >>                  DWordMemory (ResourceProducer, PosDecode, MinFixed, MaxFixed, NonCacheable, ReadWrite,
> >>                      0x00000000,         // Address Space Granularity
> >>                      0xE0000000,         // Address Range Minimum
> >>                      0xFEBFFFFF,         // Address Range Maximum
> >>                      0x00000000,         // Address Translation Offset
> >>                      0x1EC00000,         // Address Length
> >>                      ,, , AddressRangeMemory, TypeStatic)
> >
> >  Uhm, indeed.  I know next to nothing about ACPI though.  Ideas anyone how this could be done?
>
> We're facing similar issues on PPC. The equivalent of the DSDT there is the device tree, which is currently passed in as binary blob and slightly appended for dynamic configuration. I'd much rather like to see it fully generated inside of Qemu from all the information we have available there, so we don't run into consistency issues.
>
> This will be even more required when we pass through SoC devices to the guest, which are not on a PCI bus. Without specifying them in the DT, the guest doesn't know about them. X86 has a similar issue. Take a look at the HPET for example. If you don't want an HPET inside the guest, the DSDT needs to be modified. So you need to change things at 2 places - the DSDT and Qemu.
>
> I don't know how much work it would be to generate the DSDT dynamically from Qemu, but IMHO that's the sanest way to make things flexible. We could probably even extract most information from the Qdev tree.
>

Generating the DSDT dynamically is hard, but the DSDT itself is 
dynamic.  You can make any function talk to the firmware configuration 
interface and return results that depend on the information there.

-- 
error compiling committee.c: too many arguments to function