[SeaBIOS] [Qemu-devel] [PATCH 1/2] pci: Automatically patch PCI device id in PCI ROM

Anthony Liguori anthony at codemonkey.ws
Fri Oct 15 23:05:14 CEST 2010


On 10/15/2010 03:51 PM, Stefan Weil wrote:
> PCI device with different device ids sometimes share
> the same rom code. Only the device id and the checksum
> differ in a boot rom for such devices.
>    

BTW, SeaBIOS doesn't reject ROMs when they're loaded via rombar, only 
when they're loaded via romfile.

Maybe it's better to use fw_cfg to explicitly tell SeaBIOS to ignore the 
PCI device id in the rom header for a certain device?

Regards,

Anthony Liguori

> The i825xx ethernet controller family is a typical example
> which is implemented in hw/eepro100.c. It uses at least
> 3 different device ids, so normally 3 boot roms would be needed.
>
> By automatically patching the device id (and the checksum)
> in qemu, all emulated family members can share the same
> boot rom.
>
> Cc: Markus Armbruster<armbru at redhat.com>
> Cc: Michael S. Tsirkin<mst at redhat.com>
> Signed-off-by: Stefan Weil<weil at mail.berlios.de>
> ---
>   hw/pci.c |   53 +++++++++++++++++++++++++++++++++++++++++++++++++++++
>   1 files changed, 53 insertions(+), 0 deletions(-)
>
> diff --git a/hw/pci.c b/hw/pci.c
> index 1280d4d..c1f8218 100644
> --- a/hw/pci.c
> +++ b/hw/pci.c
> @@ -1797,6 +1797,57 @@ static void pci_map_option_rom(PCIDevice *pdev, int region_num, pcibus_t addr, p
>       cpu_register_physical_memory(addr, size, pdev->rom_offset);
>   }
>
> +/* Patch the PCI device id in a PCI rom image if necessary.
> +   This is needed for an option rom which is used for more than one device. */
> +static void pci_patch_device_id(PCIDevice *pdev, uint8_t *ptr, int size)
> +{
> +    uint16_t vendor_id;
> +    uint16_t device_id;
> +    uint16_t rom_vendor_id;
> +    uint16_t rom_device_id;
> +    uint16_t rom_magic;
> +    uint16_t pcir_offset;
> +
> +    /* Words in rom data are little endian (like in PCI configuration),
> +       so they can be read / written with pci_get_word / pci_set_word. */
> +
> +    /* Only a valid rom will be patched. */
> +    rom_magic = pci_get_word(ptr);
> +    if (rom_magic != 0xaa55) {
> +        PCI_DPRINTF("Bad ROM magic %04x\n", rom_magic);
> +        return;
> +    }
> +    pcir_offset = pci_get_word(ptr + 0x18);
> +    if (pcir_offset + 8>= size || memcmp(ptr + pcir_offset, "PCIR", 4)) {
> +        PCI_DPRINTF("Bad PCIR offset 0x%x or signature\n", pcir_offset);
> +        return;
> +    }
> +
> +    vendor_id = pci_get_word(pdev->config + PCI_VENDOR_ID);
> +    device_id = pci_get_word(pdev->config + PCI_DEVICE_ID);
> +    rom_vendor_id = pci_get_word(ptr + pcir_offset + 4);
> +    rom_device_id = pci_get_word(ptr + pcir_offset + 6);
> +
> +    /* Don't patch a rom with wrong vendor id (might be changed if needed). */
> +    if (vendor_id != rom_vendor_id) {
> +        return;
> +    }
> +
> +    PCI_DPRINTF("ROM id %04x%04x / PCI id %04x%04x\n",
> +                vendor_id, device_id, rom_vendor_id, rom_device_id);
> +
> +    if (device_id != rom_device_id) {
> +        /* Patch device id and checksum (at offset 6 for etherboot roms). */
> +        uint8_t checksum;
> +        checksum = ptr[6];
> +        checksum += (uint8_t)rom_device_id + (uint8_t)(rom_device_id>>  8);
> +        checksum -= (uint8_t)device_id + (uint8_t)(device_id>>  8);
> +        PCI_DPRINTF("ROM checksum %02x / %02x\n", ptr[6], checksum);
> +        ptr[6] = checksum;
> +        pci_set_word(ptr + pcir_offset + 6, device_id);
> +    }
> +}
> +
>   /* Add an option rom for the device */
>   static int pci_add_option_rom(PCIDevice *pdev)
>   {
> @@ -1849,6 +1900,8 @@ static int pci_add_option_rom(PCIDevice *pdev)
>       load_image(path, ptr);
>       qemu_free(path);
>
> +    pci_patch_device_id(pdev, ptr, size);
> +
>       pci_register_bar(pdev, PCI_ROM_SLOT, size,
>                        0, pci_map_option_rom);
>
>    




More information about the SeaBIOS mailing list