[SeaBIOS] [PATCH RFC] use bootorder file supplied by qemu to order bootable devices

Gleb Natapov gleb at redhat.com
Tue Dec 14 10:42:36 CET 2010


On Mon, Dec 13, 2010 at 05:02:43PM +0200, Gleb Natapov wrote:
> On Mon, Dec 13, 2010 at 08:44:08AM -0500, Kevin O'Connor wrote:
> > On Mon, Dec 13, 2010 at 03:12:51PM +0200, Gleb Natapov wrote:
> > > On Thu, Dec 09, 2010 at 08:27:10PM -0500, Kevin O'Connor wrote:
> > > > On Wed, Dec 08, 2010 at 02:00:50PM +0200, Gleb Natapov wrote:
> > > > > With patch below (goes on top of bev per CD patch) I can specify boot
> > > > > order from qemu command line between several NICs, CDROMs, floppy and
> > > > > disk. With qemu command like this:
> > > > 
> > > > Hi Gleb.
> > > > 
> > > > I'm a bit behind right now, but I'll take a look this weekend.
> > > > 
> > > Have you had a chance to look at it? If not yet then here is updated
> > > version that fix one little bug with boot menu and choosing between
> > > multiple BCVs:
> > 
> > I did look at it, but didn't get a chance to reply.  Here are my
> > thoughts in brief:
> > 
> > * I'm okay with the general layout (read bootorder at start, note
> >   priority when adding each entry)
> > 
> > * The system seems to conflict with the sorting already done by
> >   add_bcv_internal() and add_ordered_drive() (which was added to
> >   handle threads adding drives in any order).  The get_boot_priority()
> >   code you've added isn't right, because there's no guarentee that a
> >   drive will be added in a repeatable manor (you don't want a user
> >   without "bootorder" to see different drives being booted on
> >   different boots).
> > 
> Good point. Will fix. Probably will require more invasive changes
> though.
> 
It was easier to fix than I initially thought. All BCVs and BEVs that do
not have corespondent device paths get the same lowest priority. During
sorting they stay in the same order at the end.

I search for ISA bridge dynamically now using pci_find_class(PCI_CLASS_BRIDGE_ISA).

Signed-off-by: Gleb Natapov <gleb at redhat.com>
diff --git a/src/ahci.c b/src/ahci.c
index 70c0f1c..a209c86 100644
--- a/src/ahci.c
+++ b/src/ahci.c
@@ -382,7 +382,7 @@ ahci_port_init(struct ahci_ctrl_s *ctrl, u32 pnr)
         // Setup disk geometry translation.
         setup_translation(&port->drive);
         // Register with bcv system.
-        add_bcv_internal(&port->drive);
+        add_bcv_internal(&port->drive, MAX_BOOT_PRIO);
     } else {
         // found cdrom (atapi)
         port->drive.blksize = CDROM_SECTOR_SIZE;
@@ -397,7 +397,7 @@ ahci_port_init(struct ahci_ctrl_s *ctrl, u32 pnr)
         // fill cdidmap
         if (iscd) {
             map_cd_drive(&port->drive);
-            add_baid_cdrom(&port->drive);
+            add_baid_cdrom(&port->drive, MAX_BOOT_PRIO);
 	}
     }
     dprintf(1, "%s\n", port->drive.desc);
diff --git a/src/ata.c b/src/ata.c
index d971480..e45de50 100644
--- a/src/ata.c
+++ b/src/ata.c
@@ -783,8 +783,11 @@ init_drive_atapi(struct atadrive_s *dummy, u16 *buffer)
 
     // fill cdidmap
     if (iscd) {
+        int prio = bootprio_find_ata_device(adrive_g->chan_gf->pci_bdf,
+                                            adrive_g->chan_gf->chanid,
+                                            adrive_g->slave);
         map_cd_drive(&adrive_g->drive);
-        add_baid_cdrom(&adrive_g->drive);
+        add_baid_cdrom(&adrive_g->drive, prio);
     }
 
     return adrive_g;
@@ -834,8 +837,11 @@ init_drive_ata(struct atadrive_s *dummy, u16 *buffer)
     // Setup disk geometry translation.
     setup_translation(&adrive_g->drive);
 
+    int prio = bootprio_find_ata_device(adrive_g->chan_gf->pci_bdf,
+                                        adrive_g->chan_gf->chanid,
+                                        adrive_g->slave);
     // Register with bcv system.
-    add_bcv_internal(&adrive_g->drive);
+    add_bcv_internal(&adrive_g->drive, prio);
 
     return adrive_g;
 }
diff --git a/src/boot.c b/src/boot.c
index 9c94439..157f666 100644
--- a/src/boot.c
+++ b/src/boot.c
@@ -13,10 +13,12 @@
 #include "boot.h" // struct ipl_s
 #include "cmos.h" // inb_cmos
 #include "paravirt.h"
+#include "pci.h" //pci_bdf_to_*
 
 struct ipl_s IPL;
 
 
+
 /****************************************************************
  * IPL and BCV handlers
  ****************************************************************/
@@ -67,11 +69,56 @@ boot_setup(void)
         if (!(inb_cmos(CMOS_BIOS_BOOTFLAG1) & 1))
             IPL.checkfloppysig = 1;
     }
+
+    u32 file = romfile_find("bootorder");
+    if (!file)
+        return;
+
+    int filesize = romfile_size(file);
+    dprintf(3, "bootorder file found (len %d)\n", filesize);
+
+    if (filesize == 0)
+        return;
+
+    char *f = malloc_tmphigh(filesize);
+
+    if (!f) {
+        warn_noalloc();
+        return;
+    }
+
+    romfile_copy(file, f, filesize);
+    int i;
+    IPL.fw_bootorder_count = 1;
+    while(f[i]) {
+        if (f[i] == '\n')
+            IPL.fw_bootorder_count++;
+        i++;
+    }
+    IPL.fw_bootorder = malloc_tmphigh(IPL.fw_bootorder_count*sizeof(char*));
+    if (!IPL.fw_bootorder) {
+        warn_noalloc();
+        free(f);
+        return;
+    }
+
+    dprintf(3, "boot order:\n");
+    i = 0;
+    do {
+        IPL.fw_bootorder[i] = f;
+        f = strchr(f, '\n');
+        if (f) {
+            *f = '\0';
+            f++;
+            dprintf(3, "%d: %s\n", i, IPL.fw_bootorder[i]);
+            i++;
+        }
+    } while(f);
 }
 
 // Add a BEV vector for a given pnp compatible option rom.
 void
-add_bev(u16 seg, u16 bev, u16 desc)
+add_bev(u16 seg, u16 bev, u16 desc, u8 prio)
 {
     if (! CONFIG_BOOT)
         return;
@@ -85,11 +132,12 @@ add_bev(u16 seg, u16 bev, u16 desc)
     if (desc)
         d = MAKE_FLATPTR(seg, desc);
     ie->description = d;
+    ie->prio = prio;
 }
 
 // Add a IPL entry for BAID cdrom.
 void
-add_baid_cdrom(struct drive_s *drive_g)
+add_baid_cdrom(struct drive_s *drive_g, u8 prio)
 {
     if (! CONFIG_CDROM_BOOT)
         return;
@@ -104,11 +152,18 @@ add_baid_cdrom(struct drive_s *drive_g)
     ie->type = IPL_TYPE_CDROM;
     ie->vector = (u32)drive_g;
     ie->description = "DVD/CD";
+    ie->prio = prio;
+}
+
+void set_floppy_baid_prio(u8 prio)
+{
+    struct ipl_entry_s *ie = &IPL.bev[0];
+    ie->prio = prio;
 }
 
 // Add a bcv entry for an expansion card harddrive or legacy option rom
 void
-add_bcv(u16 seg, u16 ip, u16 desc)
+add_bcv(u16 seg, u16 ip, u16 desc, u8 prio)
 {
     if (! CONFIG_BOOT)
         return;
@@ -122,11 +177,12 @@ add_bcv(u16 seg, u16 ip, u16 desc)
     if (desc)
         d = MAKE_FLATPTR(seg, desc);
     ie->description = d;
+    ie->prio = prio;
 }
 
 // Add a bcv entry for an internal harddrive
 void
-add_bcv_internal(struct drive_s *drive_g)
+add_bcv_internal(struct drive_s *drive_g, u8 prio)
 {
     if (! CONFIG_BOOT)
         return;
@@ -154,6 +210,7 @@ add_bcv_internal(struct drive_s *drive_g)
     ie->type = BCV_TYPE_INTERNAL;
     ie->vector = (u32)drive_g;
     ie->description = "";
+    ie->prio = prio;
 }
 
 
@@ -323,6 +380,41 @@ run_bcv(struct ipl_entry_s *ie)
     }
 }
 
+/* Bubble sort! Should be good enough for 8 elements */
+static void sort_ipls(struct ipl_entry_s *ipls, int iplscount)
+{
+    int stop;
+
+    if (iplscount == 0)
+        return;
+
+    do {
+        int i;
+        stop = 1;
+        for (i = 0; i < iplscount - 1; i++) {
+            if (ipls[i].prio > ipls[i+1].prio) {
+                struct ipl_entry_s tmp;
+                tmp = ipls[i];
+                ipls[i] = ipls[i+1];
+                ipls[i+1] = tmp;
+                stop = 0;
+            }
+        }
+    } while (!stop);
+}
+
+static void order_boot_devices(void)
+{
+    if (IPL.fw_bootorder_count == 0)
+        return;
+
+    sort_ipls(IPL.bcv, IPL.bcvcount);
+    /* Hard disk IPL inherits priority of the bootable bcv */
+    IPL.bev[1].prio = IPL.bcv[0].prio;
+    sort_ipls(IPL.bev, IPL.bevcount);
+    IPL.bootorder = 0x87654321;
+}
+
 // Prepare for boot - show menu and run bcvs.
 void
 boot_prep(void)
@@ -334,24 +426,38 @@ boot_prep(void)
 
     // XXX - show available drives?
 
+    order_boot_devices();
+
     // Allow user to modify BCV/IPL order.
     interactive_bootmenu();
     wait_threads();
 
-    // Setup floppy boot order
-    int override = IPL.bev[0].subchoice;
-    struct drive_s *tmp = Drives.idmap[EXTTYPE_FLOPPY][0];
-    Drives.idmap[EXTTYPE_FLOPPY][0] = Drives.idmap[EXTTYPE_FLOPPY][override];
-    Drives.idmap[EXTTYPE_FLOPPY][override] = tmp;
-
-    // Run BCVs
-    override = IPL.bev[1].subchoice;
-    if (override < IPL.bcvcount)
-        run_bcv(&IPL.bcv[override]);
-    int i;
-    for (i=0; i<IPL.bcvcount; i++)
-        if (i != override)
-            run_bcv(&IPL.bcv[i]);
+    int j;
+    for (j = 0; j < IPL.bevcount; j++) {
+        int override;
+        switch (IPL.bev[j].type) {
+        case IPL_TYPE_FLOPPY:
+	    // Setup floppy boot order
+            override = IPL.bev[j].subchoice;
+            struct drive_s *tmp = Drives.idmap[EXTTYPE_FLOPPY][0];
+            Drives.idmap[EXTTYPE_FLOPPY][0] =
+                 Drives.idmap[EXTTYPE_FLOPPY][override];
+            Drives.idmap[EXTTYPE_FLOPPY][override] = tmp;
+            break;
+        case IPL_TYPE_HARDDISK:
+            // Run BCVs
+            override = IPL.bev[j].subchoice;
+            if (override < IPL.bcvcount)
+                run_bcv(&IPL.bcv[override]);
+            int i;
+            for (i=0; i<IPL.bcvcount; i++)
+               if (i != override)
+                   run_bcv(&IPL.bcv[i]);
+	    break;
+        default:
+            break;
+        }
+    }
 }
 
 
@@ -529,3 +635,158 @@ handle_19(void)
     SET_EBDA(boot_sequence, 0);
     do_boot(0);
 }
+
+/*
+ * function returns string representing firts device path element in 'dp'
+ * and puts pointer to the rest of the device path into 'end'
+ */
+static char *dev_path_get_node(const char *dp, const char **end)
+{
+    int len;
+    char *node;
+
+    dp += 1; /* skip '/' */
+
+    *end = strchr(dp, '/');
+
+    if (*end == NULL) {
+        len = strlen(dp); /* last path element */
+        *end = dp + len;
+    } else
+        len = *end - dp;
+
+    if (len == 0)
+        return NULL;
+
+    node = malloc_tmphigh(len + 1);
+    if (!node) {
+        warn_noalloc();
+        return NULL;
+    }
+    memcpy(node, dp, len);
+    node[len] = '\0';
+
+    return node;
+}
+
+static int match_unit_address(const char *pe, const char *unit_address)
+{
+    char *s = strchr(pe, '@');
+
+    if (s == NULL)
+        return 0;
+
+    return !strcmp(s + 1, unit_address);
+}
+
+static int match_next_node_address(const char *path, const char *addr,
+                                   const char **rest)
+{
+    char *node = dev_path_get_node(path, rest);
+
+    if (!node)
+        return 0;
+
+    int r = match_unit_address(node, addr);
+    free(node);
+
+    return r;
+}
+
+static int match_pci_node(const char *path, int bdf, const char **rest)
+{
+    char pci[7];
+    int dev = pci_bdf_to_dev(bdf), fn = pci_bdf_to_fn(bdf);
+
+    if (!fn)
+        snprintf(pci, sizeof(pci), "%x", dev);
+    else
+        snprintf(pci, sizeof(pci), "%x,%x", dev, fn);
+
+    return match_next_node_address(path, pci, rest);
+}
+
+#define FW_PCI_DOMAIN "/pci at i0cf8"
+
+static u8 find_pci_device(int bdf, u8 start_idx, const char **rest)
+{
+    u8 i;
+
+    for (i = start_idx; i < IPL.fw_bootorder_count; i++) {
+        const char *path = IPL.fw_bootorder[i];
+
+        /* is pci domain? */
+        if (memcmp(path, FW_PCI_DOMAIN, strlen(FW_PCI_DOMAIN)))
+            continue;
+
+        if (match_pci_node(path + strlen(FW_PCI_DOMAIN), bdf, rest))
+            return i;
+    }
+
+    return MAX_BOOT_PRIO;
+}
+
+u8 bootprio_find_pci_device(int bdf)
+{
+    const char *rest;
+
+    return find_pci_device(bdf, 0, &rest);
+}
+
+u8 bootprio_find_ata_device(int bdf, int chanid, int slave)
+{
+    const char *rest;
+    u8 idx = 0;
+
+    if (bdf == -1)
+        return MAX_BOOT_PRIO; /* support only pci machine for now */
+
+    while((idx = find_pci_device(bdf, idx, &rest)) != MAX_BOOT_PRIO) {
+        if (match_next_node_address(rest, chanid ? "1" : "0", &rest) &&
+            match_next_node_address(rest, slave ? "1" : "0", &rest))
+            break;
+        idx++;
+    }
+
+    return idx;
+}
+
+
+u8 bootprio_find_fdc_device(int bdf, int port, int fdid)
+{
+    const char *rest;
+    u8 idx = 0;
+    char addr[5];
+
+    if (bdf == -1)
+        return MAX_BOOT_PRIO; /* support only pci machine for now */
+
+    snprintf(addr, sizeof addr, "%04x", port);
+
+    while((idx = find_pci_device(bdf, idx, &rest)) != MAX_BOOT_PRIO) {
+        if (match_next_node_address(rest, addr, &rest) &&
+            match_next_node_address(rest, fdid ? "1" : "0", &rest))
+            break;
+        idx++;
+    }
+
+    return idx;
+}
+
+u8 bootprio_find_named_rom(const char *name)
+{
+    u8 i;
+
+    for (i = 0; i < IPL.fw_bootorder_count; i++) {
+        const char *path = IPL.fw_bootorder[i];
+
+        /* is this rom file? */
+        if (memcmp(path, "/rom@", strlen("/rom@")))
+            continue;
+
+        if (strcmp(path + strlen("/rom@"), name))
+            return i;
+    }
+
+    return MAX_BOOT_PRIO;
+}
diff --git a/src/boot.h b/src/boot.h
index f751d71..5a4c6ea 100644
--- a/src/boot.h
+++ b/src/boot.h
@@ -12,6 +12,7 @@ struct ipl_entry_s {
     u16 subchoice;
     u32 vector;
     const char *description;
+    u8 prio;
 };
 
 struct ipl_s {
@@ -20,6 +21,8 @@ struct ipl_s {
     int bevcount, bcvcount;
     u32 bootorder;
     int checkfloppysig;
+    char **fw_bootorder;
+    int fw_bootorder_count;
 };
 
 #define IPL_TYPE_FLOPPY      0x01
@@ -31,6 +34,7 @@ struct ipl_s {
 #define BCV_TYPE_EXTERNAL    0x80
 #define BCV_TYPE_INTERNAL    0x02
 
+#define MAX_BOOT_PRIO        255
 
 /****************************************************************
  * Function defs
@@ -39,12 +43,17 @@ struct ipl_s {
 // boot.c
 extern struct ipl_s IPL;
 void boot_setup(void);
-void add_bev(u16 seg, u16 bev, u16 desc);
-void add_bcv(u16 seg, u16 ip, u16 desc);
+void add_bev(u16 seg, u16 bev, u16 desc, u8 prio);
+void add_bcv(u16 seg, u16 ip, u16 desc, u8 prio);
 struct drive_s;
-void add_bcv_internal(struct drive_s *drive_g);
-void add_baid_cdrom(struct drive_s *drive_g);
+void add_bcv_internal(struct drive_s *drive_g, u8 prio);
+void add_baid_cdrom(struct drive_s *drive_g, u8 prio);
+void set_floppy_baid_prio(u8 prio);
 
 void boot_prep(void);
+u8 bootprio_find_pci_device(int bdf);
+u8 bootprio_find_ata_device(int bdf, int chanid, int slave);
+u8 bootprio_find_fdc_device(int bfd, int port, int fdid);
+u8 bootprio_find_named_rom(const char *name);
 
 #endif // __BOOT_H
diff --git a/src/config.h b/src/config.h
index db3e578..0b575a9 100644
--- a/src/config.h
+++ b/src/config.h
@@ -16,9 +16,9 @@
 #define CONFIG_COREBOOT 0
 
 // Control how verbose debug output is.
-#define CONFIG_DEBUG_LEVEL 1
+#define CONFIG_DEBUG_LEVEL 5
 // Send debugging information to serial port
-#define CONFIG_DEBUG_SERIAL 0
+#define CONFIG_DEBUG_SERIAL 1
 // Screen writes are also sent to debug ports.
 #define CONFIG_SCREEN_AND_DEBUG 1
 
diff --git a/src/floppy.c b/src/floppy.c
index 6491b96..7dd3083 100644
--- a/src/floppy.c
+++ b/src/floppy.c
@@ -13,6 +13,9 @@
 #include "cmos.h" // inb_cmos
 #include "pic.h" // eoi_pic1
 #include "bregs.h" // struct bregs
+#include "pci.h" // pci_to_bdf
+#include "pci_ids.h" // PCI_CLASS_BRIDGE_ISA
+#include "boot.h" // bootprio_find_fdc_device
 
 #define FLOPPY_SIZE_CODE 0x02 // 512 byte sectors
 #define FLOPPY_DATALEN 0xff   // Not used - because size code is 0x02
@@ -131,10 +134,25 @@ floppy_setup(void)
         // XXX - disable floppies on coreboot for now.
     } else {
         u8 type = inb_cmos(CMOS_FLOPPY_DRIVE_TYPE);
-        if (type & 0xf0)
+        unsigned int prio0 = -1, prio1 = -1;
+        int bdf = pci_find_class(PCI_CLASS_BRIDGE_ISA); /* isa-to-pci bridge */
+
+        if (type & 0xf0) {
             addFloppy(0, type >> 4, DTYPE_FLOPPY);
-        if (type & 0x0f)
+            prio0 = bootprio_find_fdc_device(bdf, 0x3f0, 0);
+        }
+        if (type & 0x0f) {
             addFloppy(1, type & 0x0f, DTYPE_FLOPPY);
+            prio1 = bootprio_find_fdc_device(bdf, 0x3f0, 1);
+        }
+        if (prio1 < prio0) {
+            /* if B has lower boot priority swap it with A  */
+            struct drive_s *tmp = Drives.idmap[EXTTYPE_FLOPPY][0];
+            Drives.idmap[EXTTYPE_FLOPPY][0] = Drives.idmap[EXTTYPE_FLOPPY][1];
+            Drives.idmap[EXTTYPE_FLOPPY][1] = tmp;
+            set_floppy_baid_prio(prio1);
+        } else
+            set_floppy_baid_prio(prio0);
     }
 
     outb(0x02, PORT_DMA1_MASK_REG);
diff --git a/src/optionroms.c b/src/optionroms.c
index 854c33f..0fd9aed 100644
--- a/src/optionroms.c
+++ b/src/optionroms.c
@@ -74,6 +74,34 @@ struct pnp_data {
 // The end of the last deployed rom.
 u32 RomEnd = BUILD_ROM_START;
 
+static struct rom_dev {
+    u32 addr;
+    u8 prio;
+} rom2prio[92];
+
+static int rom2prio_cnt;
+
+static void map_rom2prio(void *addr, u8 prio)
+{
+    if (rom2prio_cnt < ARRAY_SIZE(rom2prio)) {
+        rom2prio[rom2prio_cnt].addr = (u32)addr;
+        rom2prio[rom2prio_cnt].prio = prio;
+        dprintf(3, "pci rom at memory address %x has boot prio %d\n",
+                rom2prio[rom2prio_cnt].addr, rom2prio[rom2prio_cnt].prio);
+        rom2prio_cnt++;
+    }
+}
+
+static u8 rom2prio_get(u32 addr)
+{
+    int i;
+
+    for (i = 0; i < rom2prio_cnt; i++)
+        if (rom2prio[i].addr == addr)
+            return rom2prio[i].prio;
+
+    return -1;
+}
 
 /****************************************************************
  * Helper functions
@@ -243,13 +271,18 @@ static void
 run_file_roms(const char *prefix, int isvga)
 {
     u32 file = 0;
+
     for (;;) {
         file = romfile_findprefix(prefix, file);
         if (!file)
             break;
         int ret = romfile_copy(file, (void*)RomEnd, max_rom() - RomEnd);
-        if (ret > 0)
-            init_optionrom((void*)RomEnd, 0, isvga);
+        if (ret > 0) {
+            void *rom = (void*)RomEnd;
+            ret = init_optionrom(rom, 0, isvga);
+            if (!ret && is_valid_rom(rom))
+                map_rom2prio(rom, bootprio_find_named_rom(romfile_name(file)));
+        }
     }
 }
 
@@ -342,7 +375,15 @@ init_pcirom(u16 bdf, int isvga)
     if (! rom)
         // No ROM present.
         return -1;
-    return init_optionrom(rom, bdf, isvga);
+
+    int r = init_optionrom(rom, bdf, isvga);
+
+    if (r || !is_valid_rom(rom))
+        return r;
+
+    map_rom2prio(rom, bootprio_find_pci_device(bdf));
+
+    return r;
 }
 
 
@@ -394,21 +435,22 @@ optionrom_setup(void)
             pos += OPTION_ROM_ALIGN;
             continue;
         }
+        u8 romprio = rom2prio_get(pos);
         pos += ALIGN(rom->size * 512, OPTION_ROM_ALIGN);
         struct pnp_data *pnp = get_pnp_rom(rom);
         if (! pnp) {
             // Legacy rom.
-            add_bcv(FLATPTR_TO_SEG(rom), OPTION_ROM_INITVECTOR, 0);
+            add_bcv(FLATPTR_TO_SEG(rom), OPTION_ROM_INITVECTOR, 0, romprio);
             continue;
         }
         // PnP rom.
         if (pnp->bev)
             // Can boot system - add to IPL list.
-            add_bev(FLATPTR_TO_SEG(rom), pnp->bev, pnp->productname);
+            add_bev(FLATPTR_TO_SEG(rom), pnp->bev, pnp->productname, romprio);
         else
             // Check for BCV (there may be multiple).
             while (pnp && pnp->bcv) {
-                add_bcv(FLATPTR_TO_SEG(rom), pnp->bcv, pnp->productname);
+                add_bcv(FLATPTR_TO_SEG(rom), pnp->bcv, pnp->productname, romprio);
                 pnp = get_pnp_next(rom, pnp);
             }
     }
diff --git a/src/paravirt.c b/src/paravirt.c
index ca646d4..308c809 100644
--- a/src/paravirt.c
+++ b/src/paravirt.c
@@ -345,6 +345,14 @@ int qemu_cfg_size_file(u32 select)
     return ntohl(LastFile.size);
 }
 
+
+const char* qemu_cfg_name_file(u32 select)
+{
+    if (select != ntohs(LastFile.select))
+        return NULL;
+    return LastFile.name;
+}
+
 int qemu_cfg_read_file(u32 select, void *dst, u32 maxlen)
 {
     if (!qemu_cfg_present)
diff --git a/src/paravirt.h b/src/paravirt.h
index 7d4bc02..99c473b 100644
--- a/src/paravirt.h
+++ b/src/paravirt.h
@@ -71,6 +71,7 @@ struct e820_reservation {
 u32 qemu_cfg_next_prefix_file(const char *prefix, u32 prevselect);
 u32 qemu_cfg_find_file(const char *name);
 int qemu_cfg_size_file(u32 select);
+const char* qemu_cfg_name_file(u32 select);
 int qemu_cfg_read_file(u32 select, void *dst, u32 maxlen);
 
 // Wrappers that select cbfs or qemu_cfg file interface.
@@ -94,6 +95,11 @@ static inline int romfile_copy(u32 fileid, void *dst, u32 maxlen) {
         return cbfs_copyfile((void*)fileid, dst, maxlen);
     return qemu_cfg_read_file(fileid, dst, maxlen);
 }
+static inline const char* romfile_name(u32 fileid) {
+    if (CONFIG_COREBOOT)
+        return cbfs_filename((void*)fileid);
+    return qemu_cfg_name_file(fileid);
+}
 
 u32 qemu_cfg_e820_entries(void);
 void* qemu_cfg_e820_load_next(void *addr);
diff --git a/src/usb-msc.c b/src/usb-msc.c
index 080efdc..c3ffe0b 100644
--- a/src/usb-msc.c
+++ b/src/usb-msc.c
@@ -171,7 +171,7 @@ setup_drive_hd(struct disk_op_s *op)
     setup_translation(op->drive_g);
 
     // Register with bcv system.
-    add_bcv_internal(op->drive_g);
+    add_bcv_internal(op->drive_g, MAX_BOOT_PRIO);
 
     return 0;
 }
diff --git a/src/util.c b/src/util.c
index f9a7533..3892c3c 100644
--- a/src/util.c
+++ b/src/util.c
@@ -262,6 +262,17 @@ strtcpy(char *dest, const char *src, size_t len)
     return dest;
 }
 
+// locate first occurance of character c in the string s
+char *
+strchr(const char *s, int c)
+{
+    int i = 0;
+
+    while(s[i] && s[i] != c)
+        i++;
+
+    return s[i] ? (char*)&s[i] : NULL;
+}
 
 /****************************************************************
  * Keyboard calls
diff --git a/src/util.h b/src/util.h
index fa7b20f..f5b9446 100644
--- a/src/util.h
+++ b/src/util.h
@@ -209,6 +209,7 @@ void *memcpy(void *d1, const void *s1, size_t len);
 void iomemcpy(void *d, const void *s, u32 len);
 void *memmove(void *d, const void *s, size_t len);
 char *strtcpy(char *dest, const char *src, size_t len);
+char *strchr(const char *s, int c);
 int get_keystroke(int msec);
 
 // stacks.c
diff --git a/src/virtio-blk.c b/src/virtio-blk.c
index 7a25826..3d2b7a6 100644
--- a/src/virtio-blk.c
+++ b/src/virtio-blk.c
@@ -153,7 +153,7 @@ init_virtio_blk(u16 bdf)
     vdrive_g->drive.pchs.spt = cfg.sectors;
 
     setup_translation(&vdrive_g->drive);
-    add_bcv_internal(&vdrive_g->drive);
+    add_bcv_internal(&vdrive_g->drive, bootprio_find_pci_device(bdf));
 
     snprintf(desc, MAXDESCSIZE, "Virtio disk PCI:%x:%x",
              pci_bdf_to_bus(bdf), pci_bdf_to_dev(bdf));
--
			Gleb.



More information about the SeaBIOS mailing list