[openfirmware] [commit] r3729 - in dev/olpc: . viacamera
repository service
svn at openfirmware.info
Thu Jun 12 04:46:18 CEST 2014
Author: quozl
Date: Thu Jun 12 04:46:18 2014
New Revision: 3729
URL: http://tracker.coreboot.org/trac/openfirmware/changeset/3729
Log:
OLPC XO-1.5 - fix siv120d image alignment (#12625), disable siv121c support (#12785)
Modified:
dev/olpc/seti.fth
dev/olpc/viacamera/camera.fth
Modified: dev/olpc/seti.fth
==============================================================================
--- dev/olpc/seti.fth Mon Jun 9 06:43:25 2014 (r3728)
+++ dev/olpc/seti.fth Thu Jun 12 04:46:18 2014 (r3729)
@@ -6,10 +6,9 @@
\ SNR
00 00 ov! \ bank 0
- 00 04 ov!
- 03 05 ov! \ CHIP_CNTR
- \ 33 07 ov!
- 32 07 ov!
+ 00 04 ov! \ CNTR_B, enable preview mode
+ 03 05 ov! \ VMODE, VGA 640 x 480
+ 32 07 ov! \ CNTR_C, output drivability control, PCLK 19mA, other 14mA
34 10 ov!
27 11 ov!
21 12 ov!
@@ -17,11 +16,11 @@
ce 16 ov!
aa 17 ov!
- 00 20 ov! \ P_BNKT
+ \ frame control registers for preview mode
+ 00 20 ov! \ P_BNKT, [5:4] P_HBNKT high bits, [1:0] P_VBNKT high bits
01 21 ov! \ P_HBNKT
01 22 ov! \ P_ROWFIL
- 65 23 ov! \ P_VBNKT - 01 for 30 fps, 65 for 25 fps
- \ vertical blank time, (siv120d.c uses 01)
+ 65 23 ov! \ P_VBNKT, 01 for 30 fps, 65 for 25 fps (siv120d.c uses 01)
\ AE
01 00 ov!
@@ -289,6 +288,10 @@
then
;
+\ SIV121C, not supported on XO-1.5,
+\ because sensor maximum clock 27 MHz, and host provides 48 MHz.
+
+[ifndef] olpc-xo-1.5
: siv121c-config ( ycrcb? -- )
>r ( r: ycrcb? )
@@ -648,6 +651,7 @@
cb 12 ov! \ OUTFMT, RGB565 setting
then
;
+[then]
: (set-mirrored) ( mirrored? -- )
4 ov@ 1 ( mirrored? reg-value bit )
@@ -659,9 +663,11 @@
0 0 ov! (set-mirrored)
;
+[ifndef] olpc-xo-1.5
: siv121c-set-mirrored ( mirrored? -- )
1 0 ov! (set-mirrored)
;
+[then]
: probe-seti ( -- found? )
h# 33 to camera-smb-slave ( )
@@ -674,6 +680,7 @@
false exit ( -- false )
then ( regval )
+[ifndef] olpc-xo-1.5
dup h# 95 = if
" SETi,SIV121C" " sensor" string-property
[ifdef] set-sensor-properties
@@ -683,6 +690,7 @@
['] siv121c-config to camera-config
drop true exit
then
+[then]
dup h# 12 = if
" SETi,SIV120D" " sensor" string-property
Modified: dev/olpc/viacamera/camera.fth
==============================================================================
--- dev/olpc/viacamera/camera.fth Mon Jun 9 06:43:25 2014 (r3728)
+++ dev/olpc/viacamera/camera.fth Thu Jun 12 04:46:18 2014 (r3729)
@@ -70,6 +70,12 @@
: soft-reset ( -- ) ;
+: ?siv120d ( -- )
+ ['] camera-config behavior ['] siv120d-config = if
+ 0640.0140 314 cl! \ Horizontal end and start cycles for siv120d
+ then \ (a quirk specific to XO-1.5 and siv120d)
+;
+
: (init) ( -- )
0 300 cl! \ Mask all interrupts
8850.2104 310 cl! \ Enable CLK, FIFO threshold, UYVY, 8-bit CCIR601,
@@ -156,6 +162,7 @@
init
my-args " yuv" $= to use-ycrcb?
sensor-found? 0= if false exit then
+ ?siv120d
alloc-dma-bufs
read-setup
true
More information about the openfirmware
mailing list