[openfirmware] Using Open Firmware as a boot manager
wmb at laptop.org
Fri Mar 18 23:46:24 CET 2011
On 3/18/2011 12:27 PM, Mitch Bradley wrote:
>> Let me guess: I can't see the SCSI devices because the 2940 ROM doesn't
>> contain fcode :-)
> Correct. You would need to add a driver for your SCSI chip/card in the
> OFW build.
FYI, I have (old) FCode drivers for Adaptec 7897, 7890, and 7860. I
don't have a driver for 2940. Adaptec's Linux driver supports at least
7860 and 2940, but I haven't studied it to see if there is much
commonality between them.
More information about the openfirmware