[openfirmware] [commit] r2352 - cpu/arm/olpc/1.75
repository service
svn at openfirmware.info
Thu Jul 14 01:28:42 CEST 2011
Author: wmb
Date: Thu Jul 14 01:28:41 2011
New Revision: 2352
URL: http://tracker.coreboot.org/trac/openfirmware/changeset/2352
Log:
OLPC XO-1.75 - fixed DRAM timings to match Marvell's latest recommendations. This is in the version of the file that splits out the parameters into individual fields, not the digested version that is used in CForth for the actual parameter setting.
Modified:
cpu/arm/olpc/1.75/xo-dram.fth
Modified: cpu/arm/olpc/1.75/xo-dram.fth
==============================================================================
--- cpu/arm/olpc/1.75/xo-dram.fth Thu Jul 14 01:12:07 2011 (r2351)
+++ cpu/arm/olpc/1.75/xo-dram.fth Thu Jul 14 01:28:41 2011 (r2352)
@@ -77,16 +77,16 @@
mmap0
h# 0000.0000 d# 23 rshift start-addr
-h# 4000.0000 log2 d# 16 - area-length
+h# 2000.0000 log2 d# 16 - area-length
h# 0000.0000 d# 23 rshift addr-mask
1 cs-valid
outbits
mmap1
-h# 4000.0000 d# 23 rshift start-addr
-h# 4000.0000 log2 d# 16 - area-length
+h# 2000.0000 d# 23 rshift start-addr
+h# 2000.0000 log2 d# 16 - area-length
h# 0000.0000 d# 23 rshift addr-mask
-0 cs-valid
+1 cs-valid
outbits
sdram-config-type1-cs0
@@ -166,16 +166,16 @@
outbits
sdram-timing4
-d# 5.625 ns>clk d# 4 max tcke
+d# 5.625 ns>clk ( d# 4 max ) tcke
d# 200000.000 ns>clk d# 1024 /roundup init-count
- 1 trwd-ext-dly
+ 2 trwd-ext-dly
d# 100.000 ns>clk reset-count
-d# 390 init-count-nop
+d# 391 init-count-nop
outbits
sdram-timing5
d# 37.500 ns>clk 0 max tras
-d# 37.500 ns>clk 0 max tfaw
+d# 37.500 ns>clk d# 20 max tfaw
d# 1 tccd-ccs-ext-dly
outbits
@@ -186,9 +186,9 @@
outbits
sdram-ctrl1
-1 aps-en
-1 aps-type
-4 aps-value
+0 aps-en \ 1 aps-en
+0 aps-type \ 1 aps-type
+0 aps-value \ 4 aps-value
d# 12.500 ns>clk acs-exit-dly
0 acs-en
0 dll-reset
@@ -198,14 +198,14 @@
outbits
sdram-ctrl2
-0 ref-posted-en
-0 ref-posted-max
-d# 16 sdram-line-boundary
+1 ref-posted-en
+7 ref-posted-max
+d# 8 sdram-line-boundary
0 refpb-mode
0 pd-mode
0 2t-mode
0 rdimm-mode
-1 aprecharge
+0 aprecharge
0 int-shadow-mode
0 test-mode
outbits
@@ -235,9 +235,9 @@
0 al-number \ unsupported
0 al-en
0 rq-ds-en
-3 cas-latency \ For DDR3, upper 3 bits of CL - so 3 for CL6 and CL7
+2 cas-latency \ For DDR3, upper 3 bits of CL - so 3 for CL6 and CL7
0 cas-latency-lower \ For DDR3, lower bit of CL - so 0 for CL6, 1 for CL7
-1 cwl \ 0 for WL5, 1 for WL6, 2 for WL7, 3 for WL8
+0 cwl \ 0 for WL5, 1 for WL6, 2 for WL7, 3 for WL8
0 s4-type \ LPDDR2 only
0 asr \ DDR3 only
0 srt \ DDR3 only
@@ -267,7 +267,7 @@
outbits
sdram-ctrl8-odt-ctrl2
-1 xpage-en
+0 xpage-en
3 mc-queue-size-f
3 mc-queue-size
outbits
@@ -354,37 +354,11 @@
0 write-protection
outbits
-phy-ctrl11
-0 mc-sync-type
-outbits
-
-\ This is the base value
-phy-ctrl14
-1 phy-sync-en
-0 dll-update-en
-0 phy-dll-rst
-0 phy-pll-rst
-0 dll-update-en-static
-outbits
-
-\ Assert DLL reset
-phy-ctrl14
-1 phy-sync-en
-0 dll-update-en
-1 phy-dll-rst
-0 phy-pll-rst
-0 dll-update-en-static
-outbits
-
-\ Release DLL reset
-phy-ctrl14
-1 phy-sync-en
-0 dll-update-en
-0 phy-dll-rst
-0 phy-pll-rst
-0 dll-update-en-static
-outbits
+\ phy-ctrl11
+\ 0 mc-sync-type
+\ outbits
+0 [if]
\ First value, with auto-cal enabled
phy-ctrl10
1 pad-cal-interval
@@ -418,6 +392,7 @@
0 mc-ck-pd
0 mc-ac-d
outbits
+[then]
phy-ctrl3
h# 2000 phy-res \ Reserved, but Marvell spreadsheet sets it
@@ -426,30 +401,30 @@
0 dq-oen-extend
0 dq-oen-dly
0 rd-ext-dly
-4 phy-rfifo-rptr-dly-val \ Tune me !!!
-4 dq-ext-dly \ Tune me !!!
+3 phy-rfifo-rptr-dly-val \ Tune me !!!
+3 dq-ext-dly \ Tune me !!!
outbits
phy-ctrl7
1 phy-qs-vref-sel
-b# 1111 phy-dq-zpdrv
-b# 1111 phy-dq-zndrv
+b# 0111 phy-dq-zpdrv
+b# 0111 phy-dq-zndrv
b# 1000 phy-dq-zptrm
b# 0100 phy-dq-zntrm
-b# 1000 phy-dq-znr
-b# 0100 phy-dq-zpr
+b# 0111 phy-dq-znr
+b# 1001 phy-dq-zpr
b# 10 phy-dq-vref-sel
0 phy-dq-zd
1 phy-dq-mode
outbits
phy-ctrl8
-b# 1111 phy-adcm-zpdrv
-b# 1111 phy-adcm-zndrv
+b# 0111 phy-adcm-zpdrv
+b# 0111 phy-adcm-zndrv
b# 0000 phy-adcm-zptrm
b# 0000 phy-adcm-zntrm
-b# 1000 phy-adcm-znr
-b# 0100 phy-adcm-zpr
+b# 0111 phy-adcm-znr
+b# 1001 phy-adcm-zpr
0 phy-adcm-zd
outbits
@@ -463,45 +438,63 @@
0 phy-wc-qs-dly
0 phy-wck-ac-dly
0 phy-wck-ck-dly
-b# 1000 phy-ck-znr
-b# 0100 phy-ck-zpr
+b# 0111 phy-ck-znr
+b# 0111 phy-ck-zpr
outbits
phy-ctrl13
-2 dll-resrt-timer
+d# 13 dll-resrt-timer
0 dll-update-stall-mc-dis
-d# 16 dll-delay-test
-d# 08 dll-phsel
-1 dll-auto-manual-up
+0 dll-delay-test
+d# 04 dll-phsel
+0 dll-auto-manual-up
0 dll-auto-update-en
0 dll-test-en
0 dll-bypass-en
outbits
phy-dll-ctrl1
-d# 16 dll-delay-test
-d# 8 dll-phsel
+0 dll-delay-test
+d# 4 dll-phsel
0 dll-auto-update-en
0 dll-test-en
0 dll-bypass-en
outbits
phy-dll-ctrl2
-d# 16 dll-delay-test
-d# 8 dll-phsel
+0 dll-delay-test
+d# 4 dll-phsel
0 dll-auto-update-en
0 dll-test-en
0 dll-bypass-en
outbits
phy-dll-ctrl3
-d# 16 dll-delay-test
-d# 8 dll-phsel
+0 dll-delay-test
+d# 4 dll-phsel
0 dll-auto-update-en
0 dll-test-en
0 dll-bypass-en
outbits
+\ Assert DLL reset
+phy-ctrl14
+0 phy-sync-en
+0 dll-update-en
+1 phy-dll-rst
+0 phy-pll-rst
+0 dll-update-en-static
+outbits
+
+\ Release DLL reset and enable update
+phy-ctrl14
+0 phy-sync-en
+1 dll-update-en
+0 phy-dll-rst
+0 phy-pll-rst
+0 dll-update-en-static
+outbits
+
phy-ctrl-wl-select
0 phy-wl-dqs-recen-dqs
0 phy-wl-cs-sel
More information about the openfirmware
mailing list