[OpenBIOS] Adding support for more CPUs
Mark Cave-Ayland
mark.cave-ayland at ilande.co.uk
Sat Jan 20 11:05:56 CET 2018
On 19/01/18 12:26, Jd Lyons via OpenBIOS wrote:
> As an addition to my post at qemu-ppc, I’d like to add support for a few
> more cpus to Openbios, so when I get KVM to support -cpu host: openbios
> will be able to boot from the cpu’s I have.
>
> Right now I have a Powerbook6,8 with a 7447a ( PRV 80030105 ) I think
> this CPU is V1.5.
>
> I also have a iBook with a 750fx ( PVR 70000112 ).
>
> Soon I will have a Quicksilver with Dual 1Ghz G4’s, and an iBook G4 with
> a 7447a, not sure of the PVR’s yet.
>
> So, I see that I need to edit the init.c, and I noticed we might need
> some real values from some of the chips.
>
> { // XXX find out real values
> .iu_version = 0x800c0000,
> .name = "PowerPC,74xx",
> .icache_size = 0x8000,
> .dcache_size = 0x8000,
> .icache_sets = 0x80,
> .dcache_sets = 0x80,
> .icache_block_size = 0x20,
> .dcache_block_size = 0x20,
> .tlb_sets = 0x40,
> .tlb_size = 0x80,
> .initfn = cpu_750_init,
>
> Mark, how can I get the values needed from my CPU’s?
>
> I’m assuming we need the values for the .icach_size etc.
On a real Mac you can see them in the CPU node in the Open Firmware
device tree. This is how it looks in OpenBIOS (should be fairly easy to
do the equivalent on a real Mac):
0 > dev /cpus ok
0 > ls
fff5ba80 PowerPC,750 at 0
ok
0 > dev PowerPC,750 ok
0 > .properties
name "PowerPC,750"
device_type "cpu"
cpu-version 80301
d-cache-size 8000
i-cache-size 8000
d-cache-sets 80
i-cache-sets 80
d-cache-block-size 20
i-cache-block-size 20
tlb-sets 40
tlb-size 80
timebase-frequency fd4bc0
clock-frequency fdad680
bus-frequency 3ef1480
state "running"
reservation-granule-size 20
reg 00000000
available 00004000 07c54000
07e10000 781f0000
translations 00001000 00003000 00001000 00000000
07c58000 001b8000 07c58000 00000000
fff00000 00100000 07f00000 00000000
ok
ATB,
Mark.
More information about the OpenBIOS
mailing list