[OpenBIOS] [commit] r1195 - in trunk/openbios-devel: drivers forth/device libopenbios
repository service
svn at openbios.org
Sat Jul 27 15:17:42 CEST 2013
Author: mcayland
Date: Sat Jul 27 15:17:41 2013
New Revision: 1195
URL: http://tracker.coreboot.org/trac/openbios/changeset/1195
Log:
video: rename qemu-video-* words to openbios-video-*
Now that the second half of the display rework is complete, the qemu-video-*
words are no longer QEMU-specific. This is because we now initialise the
defaults to the value of the VGA_DEFAULT_* constants and only attempt to
override them with the values supplied by the QEMU firmware interface if
built with CONFIG_QEMU enabled.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland at ilande.co.uk>
Modified:
trunk/openbios-devel/drivers/tcx.fs
trunk/openbios-devel/drivers/vga.fs
trunk/openbios-devel/forth/device/display.fs
trunk/openbios-devel/libopenbios/video_common.c
Modified: trunk/openbios-devel/drivers/tcx.fs
==============================================================================
--- trunk/openbios-devel/drivers/tcx.fs Sat Jul 27 13:22:06 2013 (r1194)
+++ trunk/openbios-devel/drivers/tcx.fs Sat Jul 27 15:17:41 2013 (r1195)
@@ -12,28 +12,28 @@
\ and height, grab the ones passed in by QEMU/generated by OpenBIOS
\
-: qemu-video-addr
- " qemu-video-addr" $find if
+: openbios-video-addr
+ " openbios-video-addr" $find if
cell+ @
then
;
-: qemu-video-width
- " qemu-video-width" $find if
+: openbios-video-width
+ " openbios-video-width" $find if
cell+ @
then
;
-: qemu-video-height
- " qemu-video-height" $find if
+: openbios-video-height
+ " openbios-video-height" $find if
cell+ @
then
;
: qemu-tcx-driver-install ( -- )
- qemu-video-addr to frame-buffer-adr
+ openbios-video-addr to frame-buffer-adr
default-font set-font
- qemu-video-width qemu-video-height over char-width / over char-height /
+ openbios-video-width openbios-video-height over char-width / over char-height /
fb8-install
;
Modified: trunk/openbios-devel/drivers/vga.fs
==============================================================================
--- trunk/openbios-devel/drivers/vga.fs Sat Jul 27 13:22:06 2013 (r1194)
+++ trunk/openbios-devel/drivers/vga.fs Sat Jul 27 15:17:41 2013 (r1195)
@@ -12,28 +12,28 @@
\ and height, grab the ones passed in by QEMU/generated by OpenBIOS
\
-: qemu-video-addr
- " qemu-video-addr" $find if
+: openbios-video-addr
+ " openbios-video-addr" $find if
cell+ @
then
;
-: qemu-video-width
- " qemu-video-width" $find if
+: openbios-video-width
+ " openbios-video-width" $find if
cell+ @
then
;
-: qemu-video-height
- " qemu-video-height" $find if
+: openbios-video-height
+ " openbios-video-height" $find if
cell+ @
then
;
: qemu-vga-driver-install ( -- )
- qemu-video-addr to frame-buffer-adr
+ openbios-video-addr to frame-buffer-adr
default-font set-font
- qemu-video-width qemu-video-height over char-width / over char-height /
+ openbios-video-width openbios-video-height over char-width / over char-height /
fb8-install
;
Modified: trunk/openbios-devel/forth/device/display.fs
==============================================================================
--- trunk/openbios-devel/forth/device/display.fs Sat Jul 27 13:22:06 2013 (r1194)
+++ trunk/openbios-devel/forth/device/display.fs Sat Jul 27 15:17:41 2013 (r1195)
@@ -50,10 +50,10 @@
0 value line-bytes
0 value display-ih
-\ internal values read from QEMU firmware interface
-0 value qemu-video-addr
-0 value qemu-video-height
-0 value qemu-video-width
+\ internal values
+0 value openbios-video-addr
+0 value openbios-video-height
+0 value openbios-video-width
\ The following wordset is called the "defer word interface" of the
\ terminal-emulator support package. It gets overloaded by fb1-install
Modified: trunk/openbios-devel/libopenbios/video_common.c
==============================================================================
--- trunk/openbios-devel/libopenbios/video_common.c Sat Jul 27 13:22:06 2013 (r1194)
+++ trunk/openbios-devel/libopenbios/video_common.c Sat Jul 27 15:17:41 2013 (r1195)
@@ -224,11 +224,11 @@
feval("['] display-ih cell+");
video.ih = cell2pointer(POP());
- feval("['] qemu-video-addr cell+");
+ feval("['] openbios-video-addr cell+");
video.mvirt = cell2pointer(POP());
- feval("['] qemu-video-width cell+");
+ feval("['] openbios-video-width cell+");
video.w = cell2pointer(POP());
- feval("['] qemu-video-height cell+");
+ feval("['] openbios-video-height cell+");
video.h = cell2pointer(POP());
feval("['] depth-bits cell+");
video.depth = cell2pointer(POP());
More information about the OpenBIOS
mailing list