[OpenBIOS] sparc32 status

[Stefan Reinauer]

* Parag Patel <parag at codegen.com> [060607 17:21]:
> >NetBSD booting from CD:
> >
> >  [sparc] Booting file 'cdrom' without parameters.
> >  Loading a.out image...
> >  Loaded 8388615 bytes
> >  entry point is 0x4000
> >  Jumping to entry point...
> >  obmem:>> NetBSD/sparc Secondary Boot, Revision 1.15
> >  >> (builds at b3.netbsd.org, Mon Dec 19 03:43:03 UTC 2005)
> >  Booting diag
> >  Cannot load diag: error=20
> > 
> >  device[sd(0,2,0):b] ("halt" to halt):
 
> In any case, it's now at the BSD device prompt, which is also good.  You
> should be able to type in a BSD-style boot-spec here to disk, partition,
> and name of the kernel here.  Unfortunately Sparc-to-BSD device mapping
> is a bit funky so you may have to grep through the BSD docs for details.
 
It seems it wants something like
/iommu at 0,10000000/sbus at 0,10001000/espdma at 4,8400000/esp at 4,8800000/sd at 2,0:b
as the device

Now, what's error 20?


Regards, 
Stefan

-- 
coresystems GmbH • Brahmsstr. 16 • D-79104 Freiburg i. Br.
      Tel.: +49 761 7668825 • Fax: +49 761 7664613
Email: info at coresystems.de  • http://www.coresystems.de/