[OpenBIOS] sparc32 status
Stefan Reinauer
stepan at coresystems.de
Wed Jun 7 09:55:58 CEST 2006
Linux:
always assumes it is booted from the serial console, so you need to
specify "console=tty1" if you boot graphically
NetBSD booting from CD:
[sparc] Booting file 'cdrom' without parameters.
Loading a.out image...
Loaded 8388615 bytes
entry point is 0x4000
Jumping to entry point...
obmem:>> NetBSD/sparc Secondary Boot, Revision 1.15
>> (builds at b3.netbsd.org, Mon Dec 19 03:43:03 UTC 2005)
Booting diag
Cannot load diag: error=20
device[sd(0,2,0):b] ("halt" to halt):
NetBSD kernel directly:
[sparc] Kernel already loaded
OBP version 3, revision 2.25 (plugin rev 2)
Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005
The NetBSD Foundation, Inc. All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
NetBSD 3.0 (GENERIC) #0: Mon Dec 19 04:01:27 UTC 2005
builds at b3.netbsd.org:/home/builds/ab/netbsd-3-0-RELEASE/sparc/200512182024Z-obj/home/builds/ab/netbsd-3-0-RELEASE/src/sys/arch/sparc/compile/GENERIC
total memory = 127 MB
avail memory = 120 MB
bootpath:
data fault: pc=0xf02a4f3c addr=0x7ff000
sfsr=126<PERR=0,LVL=1,AT=1,FT=1,FAV,OW>
panic: kernel fault
halted
Solaris 8 iso:
[sparc] Booting file 'cdrom' without parameters.
Loading a.out image...
Loaded 7680 bytes
entry point is 0x4000
Jumping to entry point...
device iommu size -1
device sbus size -1
device eeprom address prop too big
device auxio size -1
qemu: fatal: Trying to execute code outside RAM or ROM at 0xff00000d
Stefan
--
coresystems GmbH • Brahmsstr. 16 • D-79104 Freiburg i. Br.
Tel.: +49 761 7668825 • Fax: +49 761 7664613
Email: info at coresystems.de • http://www.coresystems.de/
More information about the OpenBIOS
mailing list