[OpenBIOS] Try again

James V Hendricks jimi at acl.lanl.gov
Fri Jun 16 14:56:16 CEST 2000 

These are the _real_ logbufs.  Ignore the last one I sent.

Any ideas?

	- James

This is straight out of NVRAM; it halts early:
>>>>>>
Linux version 2.4.0-test1 (jimi at yellow) (gcc version egcs-2.91.66 19990314/Linux (egcs-1.1.2 release)) #41 SMP Fri Jun 16 11:38:58 MDT 2000.
BIOS-provided physical RAM map:.
 e820: 000000000009f000 @ 0000000000000000 (usable).
 e820: 0000000003e00000 @ 0000000000100000 (usable).
James: Generating my own MP Floating Pointer table
kmem_alloc: NULL ptr (name=unknown).
On node 0 totalpages: 16128.
zone(0): 4096 pages..
zone(1): 12032 pages..
zone(2): 0 pages..
Intel MultiProcessor Specification v1.4.
    Virtual Wire compatibility mode..
Default MP configuration #5.
Processor #0 Pentium(tm) Pro APIC version 16.
    Floating point unit present..
    Machine Exception supported..
    64 bit compare & exchange supported..
Processor #1 Pentium(tm) Pro APIC version 16.
    Floating point unit present..
    Machine Exception supported..
    64 bit compare & exchange supported..
Bus #0 is ISA   .
Bus #1 is PCI   .
I/O APIC #2 Version 16 at 0xFEC00000..
Int: type 0, pol 0, trig 0, bus 0, IRQ 00, APIC ID 2, APIC INT 02.
Int: type 0, pol 0, trig 0, bus 0, IRQ 01, APIC ID 2, APIC INT 01.
Int: type 0, pol 0, trig 0, bus 0, IRQ 03, APIC ID 2, APIC INT 03.
Int: type 0, pol 0, trig 0, bus 0, IRQ 04, APIC ID 2, APIC INT 04.
Int: type 0, pol 0, trig 0, bus 0, IRQ 05, APIC ID 2, APIC INT 05.
Int: type 0, pol 0, trig 0, bus 0, IRQ 06, APIC ID 2, APIC INT 06.
Int: type 0, pol 0, trig 0, bus 0, IRQ 07, APIC ID 2, APIC INT 07.
Int: type 0, pol 0, trig 0, bus 0, IRQ 08, APIC ID 2, APIC INT 08.
Int: type 0, pol 0, trig 0, bus 0, IRQ 09, APIC ID 2, APIC INT 09.
Int: type 0, pol 0, trig 0, bus 0, IRQ 0a, APIC ID 2, APIC INT 0a.
Int: type 0, pol 0, trig 0, bus 0, IRQ 0b, APIC ID 2, APIC INT 0b.
Int: type 0, pol 0, trig 0, bus 0, IRQ 0c, APIC ID 2, APIC INT 0c.
Int: type 0, pol 0, trig 0, bus 0, IRQ 0d, APIC ID 2, APIC INT 0d.
Int: type 0, pol 0, trig 0, bus 0, IRQ 0e, APIC ID 2, APIC INT 0e.
Int: type 0, pol 0, trig 0, bus 0, IRQ 0f, APIC ID 2, APIC INT 0f.
Int: type 3, pol 0, trig 0, bus 0, IRQ 00, APIC ID 2, APIC INT 00.
Lint: type 3, pol 0, trig 0, bus 0, IRQ 00, APIC ID ff, APIC LINT 00.
Lint: type 1, pol 0, trig 0, bus 0, IRQ 00, APIC ID ff, APIC LINT 01.
Processors: 2.
James: a) 1   b) 3  c) 16  d) 16  e) fee00000.
mapped APIC to ffffe000 (fee00000).
mapped IOAPIC to ffffd000 (fec00000).
Enabling extended fast FPU save and restore ... done..
Enabling KNI unmasked exception support ... done..
Kernel command line: root=/dev/hda1 ide0=reset.
Initializing CPU#0.
Detected 497445265 Hz processor..
Console: colour dummy device 80x25.
Calibrating delay loop... 989.59 BogoMIPS.
Memory: 61860k/64512k available (643k kernel code, 2264k reserved, 82k data, 180k init, 0k highmem).
Dentry-cache hash table entries: 8192 (order: 4, 65536 bytes).
Buffer-cache hash table entries: 1024 (order: 0, 4096 bytes).
Page-cache hash table entries: 16384 (order: 4, 65536 bytes).
kmem_create: Poisoning requested, but con given - bdev_cache.
Inode-cache hash table entries: 4096 (order: 3, 32768 bytes).
kmem_create: Poisoning requested, but con given - inode_cache.
CPU serial number disabled..
Checking 386/387 coupling... OK, FPU using exception 16 error reporting..
Checking 'hlt' instruction... OK..
POSIX conformance testing by UNIFIX.
mtrr: v1.36 (20000221) Richard Gooch (rgooch at atnf.csiro.au).
CPU serial number disabled..
CPU0: Intel Pentium III (Katmai) stepping 03.
per-CPU timeslice cutoff: 0.00 usecs..
weird, boot CPU (#15) not listed by the BIOS..
Getting VERSION: ffffffff.
Getting VERSION: ffffffff.
Getting LVT0: ffffffff.
Getting LVT1: ffffffff.
masked ExtINT on CPU#0.
ESR value before enabling vector: ffffffff.
ESR value after enabling vector: ffffffff.
CPU present map: 8003.
Booting processor 1/0 eip 2000.
Setting warm reset code and vector..
1..
2..
3..
Asserting INIT..
Waiting for send to finish....

++++++++++++++++++++++++++
Deasserting INIT..
Waiting for send to finish....

++++++++++++++++++++++++++
#startup loops: 2..
Sending STARTUP #1..
After apic_write..
Startup point 1..
Waiting for send to finish....

++++++++++++++++++++++++++
After Startup..
APIC never delivered???.
APIC delivery error (ef)..
phys CPU #0 not responding - cannot use it..
Booting processor 1/1 eip 2000.
Setting warm reset code and vector..
1..
2..
3..
Asserting INIT..
Waiting for send to finish....

++++++++++++++++++++++++++
Deasserting INIT..
Waiting for send to finish....

++++++++++++++++++++++++++
#startup loops: 2..
Sending STARTUP #1..
After apic_write..
Startup point 1..
Waiting for send to finish....

++++++++++++++++++++++++++
After Startup..
APIC never delivered???.
APIC delivery error (ef)..
phys CPU #1 not responding - cannot use it..
Before bogomips..
Error: only one processor found..
Boot done..
ENABLING IO-APIC IRQs.
...changing IO-APIC physical APIC ID to 2 ...
Kernel panic: could not set ID!.
.
In idle task - not syncing

This is after a BIOS boot via LILO.  It works (up until the disk panic,
but that is OK).

>>>>>>
Linux version 2.4.0-test1 (jimi at yellow) (gcc version egcs-2.91.66 19990314/Linux (egcs-1.1.2 release)) #41 SMP Fri Jun 16 11:38:58 MDT 2000.
BIOS-provided physical RAM map:.
 e820: 000000000009f800 @ 0000000000000000 (usable).
 e820: 0000000000000800 @ 000000000009f800 (reserved).
 e820: 0000000000018000 @ 00000000000e8000 (reserved).
 e820: 000000000fef0000 @ 0000000000100000 (usable).
 e820: 000000000000fc00 @ 000000000fff0000 (ACPI data).
 e820: 0000000000000400 @ 000000000ffffc00 (ACPI NVS).
 e820: 0000000000010000 @ 00000000fec00000 (reserved).
 e820: 0000000000001000 @ 00000000fee00000 (reserved).
 e820: 0000000000080000 @ 00000000fff80000 (reserved).
James: Generating my own MP Floating Pointer table
kmem_alloc: NULL ptr (name=unknown).
On node 0 totalpages: 65520.
zone(0): 4096 pages..
zone(1): 61424 pages..
zone(2): 0 pages..
Intel MultiProcessor Specification v1.4.
    Virtual Wire compatibility mode..
Default MP configuration #5.
Processor #0 Pentium(tm) Pro APIC version 16.
    Floating point unit present..
    Machine Exception supported..
    64 bit compare & exchange supported..
    Internal APIC present..
Processor #1 Pentium(tm) Pro APIC version 16.
    Floating point unit present..
    Machine Exception supported..
    64 bit compare & exchange supported..
    Internal APIC present..
Bus #0 is ISA   .
Bus #1 is PCI   .
I/O APIC #2 Version 16 at 0xFEC00000..
Int: type 0, pol 0, trig 0, bus 0, IRQ 00, APIC ID 2, APIC INT 02.
Int: type 0, pol 0, trig 0, bus 0, IRQ 01, APIC ID 2, APIC INT 01.
Int: type 0, pol 0, trig 0, bus 0, IRQ 03, APIC ID 2, APIC INT 03.
Int: type 0, pol 0, trig 0, bus 0, IRQ 04, APIC ID 2, APIC INT 04.
Int: type 0, pol 0, trig 0, bus 0, IRQ 05, APIC ID 2, APIC INT 05.
Int: type 0, pol 0, trig 0, bus 0, IRQ 06, APIC ID 2, APIC INT 06.
Int: type 0, pol 0, trig 0, bus 0, IRQ 07, APIC ID 2, APIC INT 07.
Int: type 0, pol 0, trig 0, bus 0, IRQ 08, APIC ID 2, APIC INT 08.
Int: type 0, pol 0, trig 0, bus 0, IRQ 09, APIC ID 2, APIC INT 09.
Int: type 0, pol 0, trig 0, bus 0, IRQ 0a, APIC ID 2, APIC INT 0a.
Int: type 0, pol 0, trig 0, bus 0, IRQ 0b, APIC ID 2, APIC INT 0b.
Int: type 0, pol 0, trig 0, bus 0, IRQ 0c, APIC ID 2, APIC INT 0c.
Int: type 0, pol 0, trig 0, bus 0, IRQ 0d, APIC ID 2, APIC INT 0d.
Int: type 0, pol 0, trig 0, bus 0, IRQ 0e, APIC ID 2, APIC INT 0e.
Int: type 0, pol 0, trig 0, bus 0, IRQ 0f, APIC ID 2, APIC INT 0f.
Int: type 3, pol 0, trig 0, bus 0, IRQ 00, APIC ID 2, APIC INT 00.
Lint: type 3, pol 0, trig 0, bus 0, IRQ 00, APIC ID ff, APIC LINT 00.
Lint: type 1, pol 0, trig 0, bus 0, IRQ 00, APIC ID ff, APIC LINT 01.
Processors: 2.
James: a) 1   b) 3  c) 16  d) 16  e) fee00000.
mapped APIC to ffffe000 (fee00000).
mapped IOAPIC to ffffd000 (fec00000).
Enabling extended fast FPU save and restore ... done..
Enabling KNI unmasked exception support ... done..
Kernel command line: BOOT_IMAGE=james ro root=301.
Initializing CPU#0.
Detected 497444516 Hz processor..
Console: colour dummy device 80x25.
Calibrating delay loop... 992.87 BogoMIPS.
Memory: 255944k/262080k available (643k kernel code, 5748k reserved, 82k data, 180k init, 0k highmem).
Dentry-cache hash table entries: 32768 (order: 6, 262144 bytes).
Buffer-cache hash table entries: 16384 (order: 4, 65536 bytes).
Page-cache hash table entries: 65536 (order: 6, 262144 bytes).
kmem_create: Poisoning requested, but con given - bdev_cache.
Inode-cache hash table entries: 16384 (order: 5, 131072 bytes).
kmem_create: Poisoning requested, but con given - inode_cache.
CPU serial number disabled..
Checking 386/387 coupling... OK, FPU using exception 16 error reporting..
Checking 'hlt' instruction... OK..
POSIX conformance testing by UNIFIX.
mtrr: v1.36 (20000221) Richard Gooch (rgooch at atnf.csiro.au).
CPU serial number disabled..
CPU0: Intel Pentium III (Katmai) stepping 03.
per-CPU timeslice cutoff: 1428.64 usecs..
Getting VERSION: 40011.
Getting VERSION: 40011.
Getting LVT0: 700.
Getting LVT1: 400.
enabled ExtINT on CPU#0.
ESR value before enabling vector: 00000000.
ESR value after enabling vector: 00000000.
CPU present map: 3.
Booting processor 1/0 eip 2000.
Setting warm reset code and vector..
1..
2..
3..
Asserting INIT..
Waiting for send to finish....
+Deasserting INIT..
Waiting for send to finish....
+#startup loops: 2..
Sending STARTUP #1..
After apic_write..
Startup point 1..
Waiting for send to finish....
Initializing CPU#1.
+CPU#1 (phys ID: 0) waiting for CALLOUT.
Sending STARTUP #2..
After apic_write..
Startup point 1..
Waiting for send to finish....
+After Startup..
Before Callout 1..
After Callout 1..
CALLIN, before setup_local_APIC()..
masked ExtINT on CPU#1.
ESR value before enabling vector: 00000000.
ESR value after enabling vector: 00000000.
Calibrating delay loop... 992.87 BogoMIPS.
Stack at about c148dfbc.
CPU serial number disabled..
OK..
CPU1: Intel Pentium III (Katmai) stepping 03.
CPU has booted..
Before bogomips..
Total of 2 processors activated (1985.74 BogoMIPS)..
Before bogocount - setting activated=1..
Boot done..
ENABLING IO-APIC IRQs.
...changing IO-APIC physical APIC ID to 2 ... ok..
Synchronizing Arb IDs..
init IO_APIC IRQs.
 IO-APIC (apicid-pin) 2-0, 2-16, 2-17, 2-18, 2-19, 2-20, 2-21, 2-22, 2-23 not connected..
..TIMER: vector=49 pin1=2 pin2=0.
activating NMI Watchdog ... done..
number of MP IRQ sources: 16..
number of IO-APIC #2 registers: 24..
testing the IO APIC........................
.
IO APIC #2.......
.... register #00: 02000000.
.......    : physical APIC id: 02.
.... register #01: 00170011.
.......     : max redirection entries: 0017.
.......     : IO APIC version: 0011.
.... register #02: 00000000.
.......     : arbitration: 00.
.... IRQ redirection table:.
 NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect:   .
 00 000 00  1    0    0   0   0    0    0    00.
 01 003 03  0    0    0   0   0    1    1    39.
 02 003 03  0    0    0   0   0    1    1    31.
 03 003 03  0    0    0   0   0    1    1    41.
 04 003 03  0    0    0   0   0    1    1    49.
 05 003 03  0    0    0   0   0    1    1    51.
 06 003 03  0    0    0   0   0    1    1    59.
 07 003 03  0    0    0   0   0    1    1    61.
 08 003 03  0    0    0   0   0    1    1    69.
 09 003 03  0    0    0   0   0    1    1    71.
 0a 003 03  0    0    0   0   0    1    1    79.
 0b 003 03  0    0    0   0   0    1    1    81.
 0c 003 03  0    0    0   0   0    1    1    89.
 0d 000 00  1    0    0   0   0    0    0    00.
 0e 003 03  0    0    0   0   0    1    1    91.
 0f 003 03  0    0    0   0   0    1    1    99.
 10 000 00  1    0    0   0   0    0    0    00.
 11 000 00  1    0    0   0   0    0    0    00.
 12 000 00  1    0    0   0   0    0    0    00.
 13 000 00  1    0    0   0   0    0    0    00.
 14 000 00  1    0    0   0   0    0    0    00.
 15 000 00  1    0    0   0   0    0    0    00.
 16 000 00  1    0    0   0   0    0    0    00.
 17 000 00  1    0    0   0   0    0    0    00.
IRQ to pin mappings:.
IRQ0 -> 2.
IRQ1 -> 1.
IRQ3 -> 3.
IRQ4 -> 4.
IRQ5 -> 5.
IRQ6 -> 6.
IRQ7 -> 7.
IRQ8 -> 8.
IRQ9 -> 9.
IRQ10 -> 10.
IRQ11 -> 11.
IRQ12 -> 12.
IRQ13 -> 13.
IRQ14 -> 14.
IRQ15 -> 15.
.................................... done..
calibrating APIC timer ... .
..... CPU clock speed is 497.4372 MHz..
..... host bus clock speed is 99.4872 MHz..
cpu: 0, clocks: 994872, slice: 331624.
CPU0<C0:994864,C:663232,D:8,S:331624,C:994872>.
cpu: 1, clocks: 994872, slice: 331624.
CPU1<C0:994864,C:331616,D:0,S:331624,C:994872>.
checking TSC synchronization across CPUs: passed..
Setting commenced=1, go go go.
PCI: Using configuration type 1.
PCI: Probing PCI hardware.
PCI: Discovered primary peer bus ff [IRQ].
PCI: Using IRQ router PIIX [8086/122e] at 00:12.0.
Linux NET4.0 for Linux 2.3.
Based upon Swansea University Computer Society NET3.039.
kmem_create: Poisoning requested, but con given - skbuff_head_cache.
Starting kswapd v1.6.
VFS: Cannot open root device "301" or 03:01.
Please append a correct "root=" boot option.
Kernel panic: VFS: Unable to mount root fs on 03:01



-
To unsubscribe: send mail to majordomo at freiburg.linux.de
with 'unsubscribe openbios' in the body of the message

More information about the openbios mailing list