[flashrom] flashrom error code message

David Hendricks david.hendricks at gmail.com
Tue Oct 16 21:42:38 CEST 2018


Hello,
I've seen this issue in cases where the voltage is not set correctly.

What programmer are you using? A verbose log will also help.

On Mon, Oct 15, 2018 at 11:28 PM MIAN VEREST <mianverest at gmail.com> wrote:

> Recently i start to use flashrom software, moreless in a winbond chip i
> receive this message, is probably IC could be damage?
>
> Waiting for your comments.
>
> thanks in advance.
>
> Erasing and writing flash chip... Erase/write done in 8 min and 26 sec.
> Verifying flash... FAILED at 0x00016650! Expected=0x3f, Found=0x3d, failed
> byte count from 0x00000000-0x007fffff: 0x2
> Your flash chip is in an unknown state.
>
>
>
>
>
> _______________________________________________
> flashrom mailing list
> flashrom at flashrom.org
> https://mail.coreboot.org/mailman/listinfo/flashrom
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://mail.coreboot.org/pipermail/flashrom/attachments/20181016/f780b9f4/attachment.html>


More information about the flashrom mailing list