[flashrom] GA-8IPE1000-G

awokd awokd at danwin1210.me
Sun Nov 25 13:31:34 CET 2018


Сергей Калиничев wrote on 11/23/18 7:13 PM:
> hi I am using the following mobo to play and update my thrashy bios file from f2
> to f6 version and the bios chip is on the list of supported devices but I got an
> error in looking for erase function
> http://www.gigabyte.ru/products/page/mb/ga-8ipe1000-g_3x#kf GA-8IPE1000-G (rev.
> 3.x) here the output of the command flashrom --programmer internal -w 8ipekg.f6
> https://pastebin.com/nkDDXZ34 I try it under freebsd 11.1 and even these advice
> doesn't help cat /etc/rc.securelevel securelevel=-1 SST49LF002A/B 256 FWH OK OK
> OK OK 3.000 3.600 I didn't find anything but tuning secure level in FAQ section
> is there any other workaround I can go for flash these mobo successfully? I
> installed winxp but I missing the point that gigabyte flash exe not work from
> desktop and there is no clear DOS to go for it, autoexec.bat with such command
> flash.exe 8pipekg.f6 dosn't work and I missing any floppy diskette for sure I
> wont to waste CDR on freedos or even format one of 16Gb flash cards for freedos
> but...well its not short way
> i attach file with info and paste
> i cant enter in hexchat after registering using sasl auth..strange but these
> complicated to me...

Perhaps try Linux instead of BSD? Might be a newer version of Flashrom 
available than the FreeBSD port.




More information about the flashrom mailing list