[flashrom] Flashing iPXE on Intel i210 on Supermicro X11SSL-F
Alex Henderson
ahenderson at aparnasystems.com
Tue Mar 6 18:08:54 CET 2018
Vadim:
Usually programming the firmware ROMs for Intel NICs requires software from Intel. https://www.intel.com/content/www/us/en/support/articles/000005790/software/manageability-products.html may do the trick.
Alex
-----Original Message-----
From: flashrom [mailto:flashrom-bounces at flashrom.org] On Behalf Of Vadim Bulst
Sent: Tuesday, March 6, 2018 12:51 AM
To: flashrom at flashrom.org
Subject: [flashrom] Flashing iPXE on Intel i210 on Supermicro X11SSL-F
Dear list,
I'm curious to know if it is possible to flash iPXE to these nics.
PCI-Id is listed in supported devices - 8086:1533 .
[root at urzospoc01 src]# flashrom -p nicintel_eeprom:pci=01:00.0 flashrom v1.0 on Linux 3.10.0-693.17.1.el7.x86_64 (x86_64) flashrom is free software, get the source code at https://flashrom.org
Using clock_gettime for delay loops (clk_id: 1, resolution: 1ns).
Found Programmer flash chip "Opaque flash chip" (4 kB,
Programmer-specific) on nicintel_eeprom.
No operations were specified.
When i build a rom for this specific nic the file has a size of 70kB.
Is there a way to get this rom to the nics?
Cheers,
Vadim
--
Vadim Bulst
Universität Leipzig / URZ
04109 Leipzig, Augustusplatz 10
phone: +49-341-97-33380
mail: vadim.bulst at uni-leipzig.de
More information about the flashrom
mailing list