[flashrom] Macronix part MX25V1635F
Emiliano A. Veiga
veigaemiliano at gmail.com
Fri Jul 27 22:11:47 CEST 2018
Hello dear,
I've try to program an SPI flash from Macronix MX25V1635F and receive
the following mensage from flashrom:
Calibrating delay loop... OK.
Found Macronix flash chip "unknown Macronix SPI chip" (0 kB, SPI) on
ft2232_spi.
===
This flash part has status NOT WORKING for operations: PROBE READ ERASE
WRITE
The test status of this chip may have been updated in the latest development
version of flashrom. If you are running the latest development version,
please email a report to flashrom at flashrom.org if any of the above
operations
work correctly for you with this flash part. Please include the flashrom
output with the additional -V option for all operations you tested (-V, -Vr,
-VE, -Vw), and mention which mainboard or programmer you tested.
Please mention your board in the subject line. Thanks for your help!
Read is not working on this chip. Aborting.
Can you help with this?
Thank you very much,
Best regards
Emiliano
More information about the flashrom
mailing list