[flashrom] Compiling from source on Chromebook:GalliumOS - can't get libusb?
anders.k.nelson at gmail.com
Wed Nov 8 16:50:09 CET 2017
Woooo looks like that did it! I don't have a flash device connected yet but
Flashrom certainly found the 2232.
Thanks for the help, I hope I can contribute definitions for the flash
chips I use (Cypress/Spansion 128/256Mbit) if I find they aren't in the
+1 (517) 775-6129
On Wed, Nov 8, 2017 at 3:31 PM, Nico Huber <nico.h at gmx.de> wrote:
> On 08.11.2017 16:11, Anders Nelson wrote:
> > Ohhh my god you're right - when I call the program as ./flashrom it runs
> > now!
> > I am still getting an error though it's new:
> > ===
> > chrx at chrx:~/Github/flashrom$ ./flashrom -p ft2232_spi
> > flashrom v0.9.9-86-ge1a960e on Linux 4.9.4-galliumos-braswell (x86_64)
> > flashrom is free software, get the source code at https://flashrom.org
> > Using clock_gettime for delay loops (clk_id: 1, resolution: 1ns).
> > Unable to open FTDI device: -3 (device not found).
> > Error: Programmer initialization failed.
> I guess, you have to specify the model (likely 2232H in your case). See
> the manpage `man ./flashrom.8`. If that doesn't work, you can check the
> output of `lsusb` if your board uses a special USB device id that we
> might have to add to flashrom.
> > ===
> > The FTDI device enumerates as /dev/ttyUSB0 and /dev/ttyUSB1... Is it
> > necessary to add a rule to udev or something to get Flashrom to find it?
-------------- next part --------------
An HTML attachment was scrubbed...
More information about the flashrom