[flashrom] Error Message - Your flash chip is in an unknown state.

[Kazer Soze]

Good morning

I have a "W25Q128.V" chip on my board and i made a backup off the old boot.
I have try to inject the new one but no luck at all.

I have this error message appear.
"Using clock_gettime for delay loops (clk_id: 1, resolution: 1ns).
Found Winbond flash chip "W25Q128.V" (16384 kB, SPI) on linux_spi.
Reading old flash chip contents... done.
Erasing and writing flash chip... FAILED at 0x000af000! Expected=0xff,
Found=0x00, failed byte count from 0x000af000-0x000affff: 0x500
ERASE FAILED!
Reading current flash chip contents... done. Looking for another erase
function.
Erase/write done.
Verifying flash... FAILED at 0x00036bca! Expected=0x00, Found=0x04, failed
byte count from 0x00000000-0x00ffffff: 0x1ea6
Your flash chip is in an unknown state.
Please report this on IRC at chat.freenode.net (channel #flashrom) or
mail flashrom at flashrom.org, thanks!"

Any chance that you could help me please?
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://mail.coreboot.org/pipermail/flashrom/attachments/20171212/f33fcaba/attachment-0001.html>