[flashrom] Error: SCIP never cleared!

[Manó Nyuszóka]

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://mail.coreboot.org/pipermail/flashrom/attachments/20170425/415313b7/attachment.html>
-------------- next part --------------
flashrom v0.9.9-rc1-r1942 on Linux 4.4.0-72-generic (i686)
flashrom was built with libpci 3.3.1, GCC 5.3.1 20160225, little endian
Command line (6 args): flashrom -p internal -r backup.rom -o backuplog.txt
Calibrating delay loop... OS timer resolution is 1 usecs, 1758M loops per second, 10 myus = 10 us, 100 myus = 99 us, 1000 myus = 989 us, 10000 myus = 9917 us, 4 myus = 4 us, OK.
Initializing internal programmer
No coreboot table found.
Using Internal DMI decoder.
DMI string chassis-type: "Desktop"
DMI string system-manufacturer: "T-Systems PC Int. GmbH"
DMI string system-product-name: "T-Systems PC P5LD2-VM"
DMI string system-version: " "
DMI string baseboard-manufacturer: "ASUSTeK Computer INC."
DMI string baseboard-product-name: "P5LD2-VM"
DMI string baseboard-version: "Rev 1.xx"
Found Winbond Super I/O, id 0x88
Found chipset "Intel ICH7/ICH7R" with PCI ID 8086:27b8.
Enabling flash write... Root Complex Register Block address = 0xfed1c000
GCS = 0x210c64: BIOS Interface Lock-Down: disabled, Boot BIOS Straps: 0x3 (LPC)
Top Swap: not enabled
0xfff80000/0xffb80000 FWH IDSEL: 0x0
0xfff00000/0xffb00000 FWH IDSEL: 0x0
0xffe80000/0xffa80000 FWH IDSEL: 0x1
0xffe00000/0xffa00000 FWH IDSEL: 0x1
0xffd80000/0xff980000 FWH IDSEL: 0x2
0xffd00000/0xff900000 FWH IDSEL: 0x2
0xffc80000/0xff880000 FWH IDSEL: 0x3
0xffc00000/0xff800000 FWH IDSEL: 0x3
0xff700000/0xff300000 FWH IDSEL: 0x4
0xff600000/0xff200000 FWH IDSEL: 0x5
0xff500000/0xff100000 FWH IDSEL: 0x6
0xff400000/0xff000000 FWH IDSEL: 0x7
0xfff80000/0xffb80000 FWH decode enabled
0xfff00000/0xffb00000 FWH decode disabled
0xffe80000/0xffa80000 FWH decode disabled
0xffe00000/0xffa00000 FWH decode disabled
0xffd80000/0xff980000 FWH decode disabled
0xffd00000/0xff900000 FWH decode disabled
0xffc80000/0xff880000 FWH decode disabled
0xffc00000/0xff800000 FWH decode disabled
0xff700000/0xff300000 FWH decode disabled
0xff600000/0xff200000 FWH decode disabled
0xff500000/0xff100000 FWH decode disabled
0xff400000/0xff000000 FWH decode disabled
Maximum FWH chip size: 0x80000 bytes
SPI Read Configuration: prefetching disabled, caching enabled, 
BIOS_CNTL = 0x01: BIOS Lock Enable: disabled, BIOS Write Enable: enabled
SPIBAR = 0xb76f0000 + 0x3020
0x00: 0x0001     (SPIS)
0x02: 0x4360     (SPIC)
0x04: 0x00000000 (SPIA)
0x50: 0x00000000 (BBAR)
0x54: 0x5006     (PREOP)
0x56: 0x462b     (OPTYPE)
0x58: 0x05ab0302 (OPMENU)
0x5c: 0xc79f0190 (OPMENU+4)
0x60: 0x00000000 (PBR0)
0x64: 0x00000000 (PBR1)
0x68: 0x00000000 (PBR2)
Programming OPCODES... 
program_opcodes: preop=5006 optype=463b opmenu=05d80302c79f0190
done
        OP        Type      Pre-OP
op[0]: 0x02, write w/  addr, none
op[1]: 0x03, read  w/  addr, none
op[2]: 0xd8, write w/  addr, none
op[3]: 0x05, read  w/o addr, none
op[4]: 0x90, read  w/  addr, none
op[5]: 0x01, write w/o addr, none
op[6]: 0x9f, read  w/o addr, none
op[7]: 0xc7, write w/o addr, none
Pre-OP 0: 0x06, Pre-OP 1: 0x50
OK.
Enabling full flash access for board "ASUS P5LD2-VM"... 
Intel ICH LPC bridge: Raising GPIO16.
OK.
The following protocols are supported: FWH, SPI.
Probing for AMIC A25L05PT, 64 kB: Error: SCIP never cleared!
Running OPCODE 0x9f failed (payload length was 4).
Probing for AMIC A25L05PU, 64 kB: Error: SCIP never cleared!
Running OPCODE 0x9f failed (payload length was 4).
Probing for AMIC A25L10PT, 128 kB: Error: SCIP never cleared!
Running OPCODE 0x9f failed (payload length was 4).
Probing for AMIC A25L10PU, 128 kB: Error: SCIP never cleared!
Running OPCODE 0x9f failed (payload length was 4).
Probing for AMIC A25L20PT, 256 kB: Error: SCIP never cleared!
Running OPCODE 0x9f failed (payload length was 4).
Probing for AMIC A25L20PU, 256 kB: Error: SCIP never cleared!
Running OPCODE 0x9f failed (payload length was 4).
Probing for AMIC A25L40PT, 512 kB: Error: SCIP never cleared!
Running OPCODE 0x9f failed (payload length was 4).
Probing for AMIC A25L40PU, 512 kB: Error: SCIP never cleared!
Running OPCODE 0x9f failed (payload length was 4).
Probing for AMIC A25L80P, 1024 kB: Error: SCIP never cleared!
Running OPCODE 0x9f failed (payload length was 4).
Probing for AMIC A25L16PT, 2048 kB: Error: SCIP never cleared!
Running OPCODE 0x9f failed (payload length was 4).
Probing for AMIC A25L16PU, 2048 kB: Error: SCIP never cleared!
Running OPCODE 0x9f failed (payload length was 4).
Probing for AMIC A25L512, 64 kB: Error: SCIP never cleared!
Running OPCODE 0x9f failed (payload length was 3).
Probing for AMIC A25L010, 128 kB: Error: SCIP never cleared!
Running OPCODE 0x9f failed (payload length was 3).
Probing for AMIC A25L020, 256 kB: Error: SCIP never cleared!
Running OPCODE 0x9f failed (payload length was 3).
Probing for AMIC A25L040, 512 kB: Error: SCIP never cleared!
Running OPCODE 0x9f failed (payload length was 3).
Probing for AMIC A25L080, 1024 kB: Error: SCIP never cleared!
Running OPCODE 0x9f failed (payload length was 3).
Probing for AMIC A25L016, 2048 kB: Error: SCIP never cleared!
Running OPCODE 0x9f failed (payload length was 3).
Probing for AMIC A25L032, 4096 kB: Error: SCIP never cleared!
Running OPCODE 0x9f failed (payload length was 3).
Probing for AMIC A25LQ16, 2048 kB: Error: SCIP never cleared!
Running OPCODE 0x9f failed (payload length was 3).
Probing for AMIC A25LQ032/A25LQ32A, 4096 kB: Error: SCIP never cleared!
Running OPCODE 0x9f failed (payload length was 3).
Probing for AMIC A25LQ64, 8192 kB: Error: SCIP never cleared!
Running OPCODE 0x9f failed (payload length was 3).
Probing for Atmel AT25DF021, 256 kB: Error: SCIP never cleared!
Running OPCODE 0x9f failed (payload length was 3).
Probing for Atmel AT25DF041A, 512 kB: Error: SCIP never cleared!
Running OPCODE 0x9f failed (payload length was 3).
Probing for Atmel AT25DF081, 1024 kB: Error: SCIP never cleared!
Running OPCODE 0x9f failed (payload length was 3).
Probing for Atmel AT25DF081A, 1024 kB: Error: SCIP never cleared!
Running OPCODE 0x9f failed (payload length was 3).
Probing for Atmel AT25DF161, 2048 kB: Error: SCIP never cleared!
Running OPCODE 0x9f failed (payload length was 3).
Probing for Atmel AT25DF321, 4096 kB: Error: SCIP never cleared!
Running OPCODE 0x9f failed (payload length was 3).
Probing for Atmel AT25DF321A, 4096 kB: Error: SCIP never cleared!
Running OPCODE 0x9f failed (payload length was 3).
Probing for Atmel AT25DF641(A), 8192 kB: Error: SCIP never cleared!
Running OPCODE 0x9f failed (payload length was 3).
Probing for Atmel AT25DL081, 1024 kB: Error: SCIP never cleared!
Running OPCODE 0x9f failed (payload length was 3).
Probing for Atmel AT25DL161, 2048 kB: Error: SCIP never cleared!
Running OPCODE 0x9f failed (payload length was 3).
Probing for Atmel AT25DQ161, 2048 kB: Error: SCIP never cleared!
Running OPCODE 0x9f failed (payload length was 3).
Probing for Atmel AT25F512, 64 kB: 
program_opcodes: preop=5006 optype=460b opmenu=05150302c79f0190
on-the-fly OPCODE (0x15) re-programmed, op-pos=2
Error: SCIP never cleared!
Running OPCODE 0x15 failed (payload length was 2).
Probing for Atmel AT25F512A, 64 kB: Error: SCIP never cleared!
Running OPCODE 0x15 failed (payload length was 2).
Probing for Atmel AT25F512B, 64 kB: Error: SCIP never cleared!
Running OPCODE 0x9f failed (payload length was 3).
Probing for Atmel AT25F1024(A), 128 kB: Error: SCIP never cleared!
Running OPCODE 0x15 failed (payload length was 2).
Probing for Atmel AT25F2048, 256 kB: Error: SCIP never cleared!
Running OPCODE 0x15 failed (payload length was 2).
Probing for Atmel AT25F4096, 512 kB: Error: SCIP never cleared!
Running OPCODE 0x15 failed (payload length was 2).
Probing for Atmel AT25FS010, 128 kB: Error: SCIP never cleared!
Running OPCODE 0x9f failed (payload length was 3).
Probing for Atmel AT25FS040, 512 kB: Error: SCIP never cleared!
Running OPCODE 0x9f failed (payload length was 3).
Probing for Atmel AT26DF041, 512 kB: Error: SCIP never cleared!
Running OPCODE 0x9f failed (payload length was 3).
Probing for Atmel AT26DF081A, 1024 kB: Error: SCIP never cleared!
Running OPCODE 0x9f failed (payload length was 3).
Probing for Atmel AT26DF161, 2048 kB: Error: SCIP never cleared!
Running OPCODE 0x9f failed (payload length was 3).
Probing for Atmel AT26DF161A, 2048 kB: Error: SCIP never cleared!
Running OPCODE 0x9f failed (payload length was 3).
Probing for Atmel AT26F004, 512 kB: Error: SCIP never cleared!
Running OPCODE 0x9f failed (payload length was 3).
Probing for Atmel AT45CS1282, 16896 kB: