[flashrom] Intel Q57 Error accessing ICH RCRB

[Bastian Germann]

Hi, as said in flashrom's output I'm mailing you. Can you help me to get
the Q57 flashing? The current firmware is the original Asus/AMI BIOS
1202 [1].

Regards, Bastian

flashrom v0.9.9-r1955 on Linux 4.10.6-1-ARCH (x86_64)
flashrom is free software, get the source code at https://flashrom.org

flashrom was built with libpci 3.4.1, GCC 5.3.0, little endian
Command line (3 args): flashrom -p internal -V
Calibrating delay loop... OS timer resolution is 1 usecs, 1594M loops
per second, 10 myus = 10 us, 100 myus = 107 us, 1000 myus = 1015 us,
10000 myus = 9982 us, 4 myus = 4 us, OK.
Initializing internal programmer
No coreboot table found.
Using Internal DMI decoder.
DMI string chassis-type: "Desktop"
DMI string system-manufacturer: "System manufacturer"
DMI string system-product-name: "System Product Name"
DMI string system-version: "System Version"
DMI string baseboard-manufacturer: "ASUSTeK Computer INC."
DMI string baseboard-product-name: "P7Q57-M DO"
DMI string baseboard-version: "Rev x.0x"
Found chipset "Intel Q57" with PCI ID 8086:3b0a.
This chipset is marked as untested. If you are using an up-to-date version
of flashrom *and* were (not) able to successfully update your firmware
with it,
then please email a report to flashrom at flashrom.org including a verbose
(-V) log.
Thank you!
Enabling flash write... Root Complex Register Block address = 0xfed1c000
Error accessing ICH RCRB, 0x4000 bytes at 0x00000000fed1c000
/dev/mem mmap failed: Operation not permitted
FAILED!
FATAL ERROR!
Error: Programmer initialization failed.

[1]
http://dlcdnet.asus.com/pub/ASUS/mb/LGA1156/P7Q57-M_DO/P7Q57-M-DO-ASUS-1202.zip