[flashrom] EN25Q128 (Thomson TG582n router) flash problem?

[Adrian Graham]

On 12/03/2016 16:27, "Stefan Tauner" <stefan.tauner at alumni.tuwien.ac.at>
wrote:

> On Sat, 12 Mar 2016 16:08:54 +0000
> Adrian Graham <witchy at binarydinosaurs.co.uk> wrote:
> 
>> On 12/03/2016 15:46, "Stefan Tauner" <stefan.tauner at alumni.tuwien.ac.at>
>> wrote:
>> 
>> 
>> Ah, OK. In that case I don't know why it didn't finish writing then, unless
>> my temporary connections between RasPi and flash moved a little bit or just
>> aren't tight enough for a good signal. Cable length maybe - signal path is
>> RasPi -> 40pin IDE cable -> hookup wires (15cm) soldered to the pads on the
>> chip. Now that I've got more female-female jumper wires I can go direct to
>> the Pi to shorten the distance drastically.
> 
> That makes a huge difference for the quality of the signals :)

Certainly does - it worked this time with a much shorter signal path! Do you
still want a verbose dump of the writing?

Still stumped on the bootloader though, even a generic tg582n won't boot.
Odd.

-- 
Adrian/Witchy
Binary Dinosaurs creator/curator
Www.binarydinosaurs.co.uk - the UK's biggest private home computer
collection?