[flashrom] asus P4P800MX error flash
E
enigmaspb at gmail.com
Sun Jun 12 11:48:17 CEST 2016
close all process
And test again
Ps - this problem is a write-protect in chip Pm49FL004 ? (i see in
"board_enable.c" variants of unlock for ASUS P4P800 mainboard and dont see
P4P800MX)
root at fe:~/flash# lspci -nnv
00:00.0 Host bridge [0600]: Intel Corporation 82865G/PE/P DRAM
Controller/Host-Hub Interface [8086:2570] (rev 02)
Subsystem: ASUSTeK Computer Inc. P4P800/P5P800 series motherboard
[1043:80f2]
Flags: bus master, fast devsel, latency 0
Memory at fe800000 (32-bit, prefetchable) [size=4M]
Capabilities: [e4] Vendor Specific Information: Len=06 <?>
Kernel driver in use: agpgart-intel
00:02.0 VGA compatible controller [0300]: Intel Corporation 82865G
Integrated Graphics Controller [8086:2572] (rev 02) (prog-if 00 [VGA
controller])
Subsystem: ASUSTeK Computer Inc. Device [1043:2572]
Flags: bus master, fast devsel, latency 0, IRQ 16
Memory at f0000000 (32-bit, prefetchable) [size=128M]
Memory at fe780000 (32-bit, non-prefetchable) [size=512K]
I/O ports at eff0 [size=8]
Expansion ROM at <unassigned> [disabled]
Capabilities: [d0] Power Management version 1
Kernel driver in use: i915
00:06.0 System peripheral [0880]: Intel Corporation 82865G/PE/P Processor
to I/O Memory Interface [8086:2576] (rev 02)
Flags: fast devsel
Memory at fecf0000 (32-bit, non-prefetchable) [size=4K]
00:1d.0 USB controller [0c03]: Intel Corporation 82801EB/ER (ICH5/ICH5R)
USB UHCI Controller #1 [8086:24d2] (rev 02) (prog-if 00 [UHCI])
Subsystem: ASUSTeK Computer Inc. Device [1043:24d0]
Flags: bus master, medium devsel, latency 0, IRQ 16
I/O ports at eec0 [size=32]
Kernel driver in use: uhci_hcd
00:1d.1 USB controller [0c03]: Intel Corporation 82801EB/ER (ICH5/ICH5R)
USB UHCI Controller #2 [8086:24d4] (rev 02) (prog-if 00 [UHCI])
Subsystem: ASUSTeK Computer Inc. Device [1043:24d0]
Flags: bus master, medium devsel, latency 0, IRQ 19
I/O ports at ef00 [size=32]
Kernel driver in use: uhci_hcd
00:1d.2 USB controller [0c03]: Intel Corporation 82801EB/ER (ICH5/ICH5R)
USB UHCI Controller #3 [8086:24d7] (rev 02) (prog-if 00 [UHCI])
Subsystem: ASUSTeK Computer Inc. Device [1043:24d0]
Flags: bus master, medium devsel, latency 0, IRQ 18
I/O ports at ef20 [size=32]
Kernel driver in use: uhci_hcd
00:1d.3 USB controller [0c03]: Intel Corporation 82801EB/ER (ICH5/ICH5R)
USB UHCI Controller #4 [8086:24de] (rev 02) (prog-if 00 [UHCI])
Subsystem: ASUSTeK Computer Inc. Device [1043:24d0]
Flags: bus master, medium devsel, latency 0, IRQ 16
I/O ports at ef40 [size=32]
Kernel driver in use: uhci_hcd
00:1d.7 USB controller [0c03]: Intel Corporation 82801EB/ER (ICH5/ICH5R)
USB2 EHCI Controller [8086:24dd] (rev 02) (prog-if 20 [EHCI])
Subsystem: ASUSTeK Computer Inc. Device [1043:24d0]
Flags: bus master, medium devsel, latency 0, IRQ 23
Memory at fe77b800 (32-bit, non-prefetchable) [size=1K]
Capabilities: [50] Power Management version 2
Capabilities: [58] Debug port: BAR=1 offset=00a0
Kernel driver in use: ehci-pci
00:1e.0 PCI bridge [0604]: Intel Corporation 82801 PCI Bridge [8086:244e]
(rev c2) (prog-if 00 [Normal decode])
Flags: bus master, fast devsel, latency 0
Bus: primary=00, secondary=01, subordinate=01, sec-latency=64
I/O behind bridge: 0000d000-0000dfff
Memory behind bridge: fe500000-fe5fffff
00:1f.0 ISA bridge [0601]: Intel Corporation 82801EB/ER (ICH5/ICH5R) LPC
Interface Bridge [8086:24d0] (rev 02)
Flags: bus master, medium devsel, latency 0
Kernel driver in use: lpc_ich
00:1f.1 IDE interface [0101]: Intel Corporation 82801EB/ER (ICH5/ICH5R) IDE
Controller [8086:24db] (rev 02) (prog-if 8f [Master SecP SecO PriP PriO])
Subsystem: ASUSTeK Computer Inc. Device [1043:24d0]
Flags: bus master, medium devsel, latency 0, IRQ 18
I/O ports at efe0 [size=8]
I/O ports at efac [size=4]
I/O ports at efa0 [size=8]
I/O ports at efa8 [size=4]
I/O ports at ef90 [size=16]
Memory at f8000000 (32-bit, non-prefetchable) [size=1K]
Kernel driver in use: ata_piix
00:1f.3 SMBus [0c05]: Intel Corporation 82801EB/ER (ICH5/ICH5R) SMBus
Controller [8086:24d3] (rev 02)
Subsystem: ASUSTeK Computer Inc. Device [1043:24d0]
Flags: medium devsel, IRQ 14
I/O ports at 0400 [size=32]
00:1f.5 Multimedia audio controller [0401]: Intel Corporation 82801EB/ER
(ICH5/ICH5R) AC'97 Audio Controller [8086:24d5] (rev 02)
Subsystem: ASUSTeK Computer Inc. Device [1043:810d]
Flags: bus master, medium devsel, latency 0, IRQ 17
I/O ports at e800 [size=256]
I/O ports at ee80 [size=64]
Memory at fe77b400 (32-bit, non-prefetchable) [size=512]
Memory at fe77b000 (32-bit, non-prefetchable) [size=256]
Capabilities: [50] Power Management version 2
Kernel driver in use: snd_intel8x0
01:09.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8169
PCI Gigabit Ethernet Controller [10ec:8169] (rev 10)
Subsystem: Realtek Semiconductor Co., Ltd. RTL8169/8110 Family PCI
Gigabit Ethernet NIC [10ec:8169]
Flags: bus master, 66MHz, medium devsel, latency 64, IRQ 17
I/O ports at d800 [size=256]
Memory at fe5ffc00 (32-bit, non-prefetchable) [size=256]
Expansion ROM at fe5c0000 [disabled] [size=128K]
Capabilities: [dc] Power Management version 2
Kernel driver in use: r8169
01:0b.0 Network controller [0280]: Ralink corp. RT2561/RT61 rev B 802.11g
[1814:0302]
Subsystem: D-Link System Inc Device [1186:2c09]
Flags: slow devsel, IRQ 22
Memory at ee5f0000 (32-bit, non-prefetchable) [size=32K]
Capabilities: [40] Power Management version 2
01:0d.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd.
RTL-8100/8101L/8139 PCI Fast Ethernet Adapter [10ec:8139] (rev 10)
Subsystem: ASUSTeK Computer Inc. Device [1043:80b3]
Flags: bus master, medium devsel, latency 64, IRQ 23
I/O ports at d400 [size=256]
Memory at fe5ff800 (32-bit, non-prefetchable) [size=256]
Capabilities: [50] Power Management version 2
Kernel driver in use: 8139too
root at fe:~/flash#
root at fe:~/flash# cat ./logfile.txt
flashrom v0.9.9-r1955 on Linux 3.13.0-38-generic (i686)
flashrom was built with libpci 3.2.1, GCC 4.8.4, little endian
Command line (8 args): ./flashrom --programmer internal -c Pm49FL004 -w
1003MXAS.rom -o logfile.txt
Calibrating delay loop... OS timer resolution is 1 usecs, 797M loops per
second, delay more than 10% too short (got 89% of expected delay),
recalculating... 796M loops per second, delay more than 10% too short (got
89% of expected delay), recalculating... 770M loops per
second, delay more than 10% too short (got 86% of expected delay),
recalculating... 826M loops per second, 10 myus = 10 us, 100 myus = 200 us,
1000 myus = 918 us, 10000 myus = 10220 us, 4 myus = 5 us, OK.
Initializing internal programmer
No coreboot table found.
Using Internal DMI decoder.
DMI string chassis-type: "Desktop"
DMI string system-manufacturer: "To Be Filled By O.E.M."
DMI string system-product-name: "To Be Filled By O.E.M."
DMI string system-version: "To Be Filled By O.E.M."
DMI string baseboard-manufacturer: "ASUSTek Computer Inc."
DMI string baseboard-product-name: "P4P800-MX"
DMI string baseboard-version: "Rev 1.xx"
Found Winbond Super I/O, id 0x82
Found chipset "Intel ICH5/ICH5R" with PCI ID 8086:24d0.
Enabling flash write... 0xfff80000/0xffb80000 FWH IDSEL: 0x0
0xfff00000/0xffb00000 FWH IDSEL: 0x0
0xffe80000/0xffa80000 FWH IDSEL: 0x1
0xffe00000/0xffa00000 FWH IDSEL: 0x1
0xffd80000/0xff980000 FWH IDSEL: 0x2
0xffd00000/0xff900000 FWH IDSEL: 0x2
0xffc80000/0xff880000 FWH IDSEL: 0x3
0xffc00000/0xff800000 FWH IDSEL: 0x3
0xff700000/0xff300000 FWH IDSEL: 0x4
0xff600000/0xff200000 FWH IDSEL: 0x5
0xff500000/0xff100000 FWH IDSEL: 0x6
0xff400000/0xff000000 FWH IDSEL: 0x7
0xfff80000/0xffb80000 FWH decode enabled
0xfff00000/0xffb00000 FWH decode disabled
0xffe80000/0xffa80000 FWH decode disabled
0xffe00000/0xffa00000 FWH decode disabled
0xffd80000/0xff980000 FWH decode disabled
0xffd00000/0xff900000 FWH decode disabled
0xffc80000/0xff880000 FWH decode disabled
0xffc00000/0xff800000 FWH decode disabled
0xff700000/0xff300000 FWH decode disabled
0xff600000/0xff200000 FWH decode disabled
0xff500000/0xff100000 FWH decode disabled
0xff400000/0xff000000 FWH decode disabled
Maximum FWH chip size: 0x80000 bytes
BIOS_CNTL = 0x01: BIOS Lock Enable: disabled, BIOS Write Enable: enabled
OK.
The following protocols are supported: FWH.
Probing for PMC Pm49FL004, 512 kB: probe_jedec_common: id1 0x9d, id2 0x6e
Found PMC flash chip "Pm49FL004" (512 kB, LPC, FWH) mapped at physical
address 0xfff80000.
Lock bits at 0xb720f002 not changed.
Lock bits at 0xb721f002 not changed.
Lock bits at 0xb722f002 not changed.
Lock bits at 0xb723f002 not changed.
Lock bits at 0xb724f002 not changed.
Lock bits at 0xb725f002 not changed.
Lock bits at 0xb726f002 not changed.
Lock bits at 0xb727f002 not changed.
Flash image seems to be a legacy BIOS. Disabling coreboot-related checks.
Reading old flash chip contents... done.
Erasing and writing flash chip... Trying erase function 0...
0x000000-0x000fff:S, 0x001000-0x001fff:S, 0x002000-0x002fff:S,
0x003000-0x003fff:S, 0x004000-0x004fff:S, 0x005000-0x005fff:S,
0x006000-0x006fff:S, 0x007000-0x007fff:S, 0x008000-0x008fff:S,
0x009000-0x009fff:S, 0x00a000-0x00afff:S, 0x00b000-0x00bfff:S,
0x00c000-0x00cfff:S, 0x00d000-0x00dfff:S, 0x00e000-0x00efff:S,
0x00f000-0x00ffff:S, 0x010000-0x010fff:S, 0x011000-0x011fff:S,
0x012000-0x012fff:S, 0x013000-0x013fff:S, 0x014000-0x014fff:S,
0x015000-0x015fff:S, 0x016000-0x016fff:S, 0x017000-0x017fff:S,
0x018000-0x018fff:S, 0x019000-0x019fff:S, 0x01a000-0x01afff:S,
0x01b000-0x01bfff:S, 0x01c000-0x01cfff:S, 0x01d000-0x01dfff:S,
0x01e000-0x01efff:S, 0x01f000-0x01ffff:S, 0x020000-0x020fff:S,
0x021000-0x021fff:S, 0x022000-0x022fff:S, 0x023000-0x023fff:S,
0x024000-0x024fff:S, 0x025000-0x025fff:S, 0x026000-0x026fff:S,
0x027000-0x027fff:S, 0x028000-0x028fff:S, 0x029000-0x029fff:S,
0x02a000-0x02afff:S, 0x02b000-0x02bfff:S, 0x02c000-0x02cfff:S,
0x02d000-0x02dfff:S, 0x02e000-0x02efff:S, 0x02f000-0x02ffff:S,
0x030000-0x030fff:S, 0x031000-0x031fff:S, 0x032000-0x032fff:S,
0x033000-0x033fff:S, 0x034000-0x034fff:S, 0x035000-0x035fff:S,
0x036000-0x036fff:S, 0x037000-0x037fff:S, 0x038000-0x038fff:S,
0x039000-0x039fff:S, 0x03a000-0x03afff:S, 0x03b000-0x03bfff:S,
0x03c000-0x03cfff:S, 0x03d000-0x03dfff:S, 0x03e000-0x03efff:S,
0x03f000-0x03ffff:S, 0x040000-0x040fff:S, 0x041000-0x041fff:S,
0x042000-0x042fff:S, 0x043000-0x043fff:S, 0x044000-0x044fff:S,
0x045000-0x045fff:S, 0x046000-0x046fff:S, 0x047000-0x047fff:S,
0x048000-0x048fff:S, 0x049000-0x049fff:S, 0x04a000-0x04afff:S,
0x04b000-0x04bfff:S, 0x04c000-0x04cfff:S, 0x04d000-0x04dfff:S,
0x04e000-0x04efff:S, 0x04f000-0x04ffff:S, 0x050000-0x050fff:S,
0x051000-0x051fff:S, 0x052000-0x052fff:S, 0x053000-0x053fff:S,
0x054000-0x054fff:S, 0x055000-0x055fff:S, 0x056000-0x056fff:S,
0x057000-0x057fff:S, 0x058000-0x058fff:S, 0x059000-0x059fff:S,
0x05a000-0x05afff:S, 0x05b000-0x05bfff:S, 0x05c000-0x05cfff:S,
0x05d000-0x05dfff:S, 0x05e000-0x05efff:S, 0x05f000-0x05ffff:S,
0x060000-0x060fff:S, 0x061000-0x061fff:S, 0x062000-0x062fff:S,
0x063000-0x063fff:S, 0x064000-0x064fff:S, 0x065000-0x065fff:S,
0x066000-0x066fff:S, 0x067000-0x067fff:S, 0x068000-0x068fff:S,
0x069000-0x069fff:S, 0x06a000-0x06afff:S, 0x06b000-0x06bfff:S,
0x06c000-0x06cfff:EFAILED at 0x0006c000! Expected=0xff, Found=0x07, failed
byte count from 0x0006c000-0x0006cfff: 0xff2
ERASE FAILED!
Reading current flash chip contents... done. Looking for another erase
function.
Trying erase function 1... 0x000000-0x00ffff:S, 0x010000-0x01ffff:S,
0x020000-0x02ffff:S, 0x030000-0x03ffff:S, 0x040000-0x04ffff:S,
0x050000-0x05ffff:S, 0x060000-0x06ffff:EFAILED at 0x00060000!
Expected=0xff, Found=0xf5, failed byte count from 0x00060000-0x0006ffff:
0x8fc6
ERASE FAILED!
Reading current flash chip contents... done. Looking for another erase
function.
Trying erase function 2... 0x000000-0x07ffff:EFAILED at 0x0000a768!
Expected=0xff, Found=0x44, failed byte count from 0x00000000-0x0007ffff:
0x6dda0
ERASE FAILED!
Looking for another erase function.
No usable erase functions left.
FAILED!
Uh oh. Erase/write failed. Checking if anything has changed.
Reading current flash chip contents... done.
Good, writing to the flash chip apparently didn't do anything.
This means we have to add special support for your board, programmer or
flash
chip. Please report this on IRC at chat.freenode.net (channel #flashrom) or
mail flashrom at flashrom.org, thanks!
-------------------------------------------------------------------------------
You may now reboot or simply leave the machine running.
Restoring PCI config space for 00:1f:0 reg 0x4e
root at fe:~/flash#
2016-06-11 13:43 GMT+03:00 Stefan Tauner <stefan.tauner at alumni.tuwien.ac.at>
:
> Hello,
>
> in case you did not do so yet, please write back your backup.
>
> I am not exactly sure what went wrong in your case. The bad timing
> might be part of the problem. Do you run some additional programs that
> heavily use the CPU while running flashrom? Can you please provide a
> verbose flashrom log while it is probing only (by adding
> "-o logfile.txt" to the command line) and please also provide the
> output of "lspci -nnv".
>
> --
> Kind regards/Mit freundlichen Grüßen, Stefan Tauner
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.flashrom.org/pipermail/flashrom/attachments/20160612/ce1729e8/attachment.html>
More information about the flashrom
mailing list