[flashrom] W836xx:MS-9121: flashrom -V

Ohm Base ohmbase1 at gmail.com
Fri Jan 29 21:35:36 CET 2016


flashrom v0.9.6.1-r1563 on Linux 3.13.0-76-generic (i686)
flashrom is free software, get the source code at http://www.flashrom.org

flashrom was built with libpci 3.1.9, GCC 4.7.1, little endian
Command line (3 args): flashrom -p internal -V
Calibrating delay loop... OS timer resolution is 1 usecs, 1639M loops per
second, 10 myus = 10 us, 100 myus = 247 us, 1000 myus = 2459 us, 10000 myus
= 12874 us, 4 myus = 4 us, OK.
Initializing internal programmer
No coreboot table found.
DMI string system-manufacturer: "IBM"
DMI string system-product-name: "-[622122U]-"
DMI string system-version: "    1.0"
DMI string baseboard-manufacturer: "IBM"
DMI string baseboard-product-name: "MS-9121"
DMI string baseboard-version: "    1.0"
DMI string chassis-type: "Tower"
W836xx enter config mode worked or we were already in config mode. W836xx
leave config mode had no effect.
Active config mode, unknown reg 0x20 ID: e9.
Please send the output of "flashrom -V" to
flashrom at flashrom.org with W836xx: your board name: flashrom -V
as the subject to help us finish support for your Super I/O. Thanks.
Found chipset "Intel ICH4/ICH4-L" with PCI ID 8086:24c0. Enabling flash
write...
BIOS Lock Enable: disabled, BIOS Write Enable: disabled, BIOS_CNTL is 0x0
OK.
The following protocols are supported: FWH.
Probing for Atmel AT49LH002, 256 kB: probe_82802ab: id1 0xff, id2 0xff, id1
parity violation, id1 is normal flash content, id2 is normal flash content
Probing for Intel 82802AB, 512 kB: probe_82802ab: id1 0xff, id2 0xff, id1
parity violation, id1 is normal flash content, id2 is normal flash content
Probing for Intel 82802AC, 1024 kB: probe_82802ab: id1 0x49, id2 0x4d, id1
is normal flash content, id2 is normal flash content
Probing for PMC Pm49FL002, 256 kB: probe_jedec_common: id1 0xbf, id2 0x5a
Probing for PMC Pm49FL004, 512 kB: probe_jedec_common: id1 0xbf, id2 0x5a
Probing for Sharp LHF00L04, 1024 kB: probe_82802ab: id1 0x49, id2 0x4d, id1
is normal flash content, id2 is normal flash content
Probing for SST SST49LF002A/B, 256 kB: probe_jedec_common: id1 0xbf, id2
0x5a
Probing for SST SST49LF003A/B, 384 kB: probe_jedec_common: id1 0xbf, id2
0x5a
Probing for SST SST49LF004A/B, 512 kB: probe_jedec_common: id1 0xbf, id2
0x5a
Probing for SST SST49LF004C, 512 kB: probe_82802ab: id1 0xff, id2 0xff, id1
parity violation, id1 is normal flash content, id2 is normal flash content
Probing for SST SST49LF008A, 1024 kB: probe_jedec_common: id1 0xbf, id2 0x5a
Found SST flash chip "SST49LF008A" (1024 kB, FWH) at physical address
0xfff00000.
Lock status for 0x000000 (size 0x010000) is 01, write locked
Lock status for 0x010000 (size 0x010000) is 01, write locked
Lock status for 0x020000 (size 0x010000) is 01, write locked
Lock status for 0x030000 (size 0x010000) is 01, write locked
Lock status for 0x040000 (size 0x010000) is 01, write locked
Lock status for 0x050000 (size 0x010000) is 01, write locked
Lock status for 0x060000 (size 0x010000) is 01, write locked
Lock status for 0x070000 (size 0x010000) is 01, write locked
Lock status for 0x080000 (size 0x010000) is 01, write locked
Lock status for 0x090000 (size 0x010000) is 01, write locked
Lock status for 0x0a0000 (size 0x010000) is 01, write locked
Lock status for 0x0b0000 (size 0x010000) is 01, write locked
Lock status for 0x0c0000 (size 0x010000) is 01, write locked
Lock status for 0x0d0000 (size 0x010000) is 01, write locked
Lock status for 0x0e0000 (size 0x010000) is 01, write locked
Lock status for 0x0f0000 (size 0x010000) is 01, write locked
Probing for SST SST49LF008C, 1024 kB: probe_82802ab: id1 0x49, id2 0x4d,
id1 is normal flash content, id2 is normal flash content
Probing for SST SST49LF016C, 2048 kB: probe_82802ab: id1 0xff, id2 0xff,
id1 parity violation, id1 is normal flash content, id2 is normal flash
content
Probing for ST M50FLW040A, 512 kB: probe_82802ab: id1 0xff, id2 0xff, id1
parity violation, id1 is normal flash content, id2 is normal flash content
Probing for ST M50FLW040B, 512 kB: probe_82802ab: id1 0xff, id2 0xff, id1
parity violation, id1 is normal flash content, id2 is normal flash content
Probing for ST M50FLW080A, 1024 kB: probe_82802ab: id1 0x49, id2 0x4d, id1
is normal flash content, id2 is normal flash content
Probing for ST M50FLW080B, 1024 kB: probe_82802ab: id1 0x49, id2 0x4d, id1
is normal flash content, id2 is normal flash content
Probing for ST M50FW002, 256 kB: probe_82802ab: id1 0xff, id2 0xff, id1
parity violation, id1 is normal flash content, id2 is normal flash content
Probing for ST M50FW016, 2048 kB: probe_82802ab: id1 0xff, id2 0xff, id1
parity violation, id1 is normal flash content, id2 is normal flash content
Probing for ST M50FW040, 512 kB: probe_82802ab: id1 0xff, id2 0xff, id1
parity violation, id1 is normal flash content, id2 is normal flash content
Probing for ST M50FW080, 1024 kB: probe_82802ab: id1 0x49, id2 0x4d, id1 is
normal flash content, id2 is normal flash content
Probing for Winbond W39V040FA, 512 kB: probe_jedec_common: id1 0xbf, id2
0x5a
Probing for Winbond W39V040FB, 512 kB: probe_jedec_common: id1 0xbf, id2
0x5a
Probing for Winbond W39V040FC, 512 kB: probe_jedec_common: id1 0xbf, id2
0x5a
Probing for Winbond W49V002FA, 256 kB: probe_jedec_common: id1 0xbf, id2
0x5a
Probing for Winbond W39V080FA, 1024 kB: probe_jedec_common: id1 0xbf, id2
0x5a
Probing for Winbond W39V080FA (dual mode), 512 kB: probe_jedec_common: id1
0xbf, id2 0x5a
Found SST flash chip "SST49LF008A" (1024 kB, FWH).
No operations were specified.
Restoring PCI config space for 00:1f:0 reg 0x4e
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.flashrom.org/pipermail/flashrom/attachments/20160129/66b07e5a/attachment.html>


More information about the flashrom mailing list