[flashrom] REPORT: MACRONIX MX 25L800(5PC-15G) AND WINBOND 25Q64F(VAIQ)

Stefan Tauner stefan.tauner at alumni.tuwien.ac.at
Sat Jan 9 16:40:10 CET 2016


On Sat, 9 Jan 2016 15:07:01 +0000 (UTC)
Marin Vlah <mvlah at yahoo.com> wrote:

> Hello everyone,
> just wanted to report successful read from 8mbit (1mb) MACRONIX MX 25L800(5PC-15G) chip and write to 64mbit (8mb) WINBOND 25Q64F(VAIQ) chip.
> I've used some old ASUS motherboard dating from May 2009 (could check exact model if needed) asbase for flashing. Booted it into prepared FreeDOS usb stick with flashrom, made backup of MACRONIX chip, hot swapped it with WINBOND chip and flashed it with new image. Everything worked like a charm and thanks so much to all people which created this great tool!
> 
> Additionaly, if this will be of any help to somebody, new image / WINBOND chip was for AsRock Extreme 4+ FM2A88M motherboard, downloaded at http://www.asrock.com/mb/AMD/FM2A88M%20Extreme4+/?cat=Download&os=BIOS.Version was 2.80 for "Instant Flash" and encapsulation in BIOS image file found inside ZIP archive (size 8mb+4kb) was trimmed to exactly 8mb using another great tool: https://github.com/LongSoft/UEFITool.
> Greetings,Marin.
> 

Hello Marin,

thanks for your report!
Both flash chips are already marked as fully tested in the current
version of flashrom. However, if the board you have used for flashing
is not already found in the wiki at
https://www.flashrom.org/Supported_hardware we could add it you supply
the exact model.

If possible, please always include a (verbose) log with such reports so
that we can verify them and also look for oddities that might be
interesting for our future work, thanks. You can easily create it by
using the -o option of flashrom, e.g.:
flashrom -p internal -o logfile.txt

-- 
Kind regards/Mit freundlichen Grüßen, Stefan Tauner




More information about the flashrom mailing list