[flashrom] New programmer board "SPI_TT LPT" support - patch submission

Max flammaden at gmail.com
Sun Feb 28 20:17:32 CET 2016


>>>Ok, thanks! I have committed a variation of your patch in r1945 but left
the status as untested.
Thanks, I'm very pleased to see my work hadn't been in vain.

The circuit power is totally on ham choice. Usually, 5V from USB or PC PSU
molex and LDO for 3.3V + some cap ~10mF after it.
If previous image is copyrighted, I have another one. :)

Best regards,
Max Arephin.

2016-02-28 20:09 GMT+03:00 Stefan Tauner <stefan.tauner at alumni.tuwien.ac.at>
:

> On Sun, 28 Feb 2016 15:27:09 +0300
> Max <flammaden at gmail.com> wrote:
>
> > SPI read was tested. Write wasn't, because of sudden AC voltage blackout
> > and I haven't had any more effort going to collecting build tools and
> > struggling with build process.
> > It's buffer enable pin is hardwired, so no control required.
>
> Ok, thanks! I have committed a variation of your patch in r1945 but left
> the status as untested.
>
> >
> > In attachment there are SPI-TT schematics, so you can add it to man page.
>
> That's easily discoverable (and copyrighted) so we won't include it.
> However, I was not able to find out how the circuit is powered (most
> information sources are in russian and translating them automatically
> was not enough to find out :). I presume Vcc is connected to an external
> power source, right?
>
> --
> Kind regards/Mit freundlichen Grüßen, Stefan Tauner
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.flashrom.org/pipermail/flashrom/attachments/20160228/79ede2cb/attachment.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: spi-tt.jpg
Type: image/jpeg
Size: 31942 bytes
Desc: not available
URL: <http://www.flashrom.org/pipermail/flashrom/attachments/20160228/79ede2cb/attachment.jpg>


More information about the flashrom mailing list