[flashrom] Not detecting Am29F010 using 3Com PCI nic
Stefan Tauner
stefan.tauner at alumni.tuwien.ac.at
Mon Feb 1 00:18:51 CET 2016
On Fri, 25 Dec 2015 03:24:13 +0100
Stefan Tauner <stefan.tauner at alumni.tuwien.ac.at> wrote:
> On Sat, 1 Aug 2015 08:34:58 +0200
> "Ignatius Grippa" <ignatiusgrippa at gmx.com> wrote:
>
> > I found a solution that works.
> > I changed the AM29F010A/B entry inside flashchips.c
> > Under ".feature_bits" I removed FEATURE_ADDR_2AA leaving only FEATURE_EITHER_RESET, After recompiling, flashrom now detects my Am29F010 and it also successfully reads and writes!
> > I'm not a programmer so I can't explain why this works but it does.
>
> Hi,
>
> that feature flag changes the behavior of the probe command and is
> exactly what was needed to get the AM29F010 version to work, thanks for
> digging this up. I have created a patch that splits the old definition
> into two, which allows to distinguish the chips. I'd be glad if you
> could test it if you still have the hardware. The patch is attached.
I have committed the patch in r1922 without testing. Subsequent testing
still welcome.
--
Kind regards/Mit freundlichen Grüßen, Stefan Tauner
More information about the flashrom
mailing list