[flashrom] [commit] r1901 - trunk
repository service
svn at flashrom.org
Sun Nov 22 03:23:31 CET 2015
Author: stefanct
Date: Sun Nov 22 03:23:31 2015
New Revision: 1901
URL: http://flashrom.org/trac/flashrom/changeset/1901
Log:
Add support for SST SST25WF020A, SST25WF040B, SST25WF080B.
Apart from the strange ID (using Sanyo's vendor ID 0x62) the main
difference from the plain SST25WF series is that they lack op codes
0xAD (AAI Word program) and 0x52 (32K erase). The smallest version
does not support dual I/O operations either.
SST25WF080B was tested under Linux with spidev.
Tested-by: Ben Gardner <bgardner at wabtec.com>
Signed-off-by: Ben Gardner <bgardner at wabtec.com>
Signed-off-by: Stefan Tauner <stefan.tauner at alumni.tuwien.ac.at>
Acked-by: Stefan Tauner <stefan.tauner at alumni.tuwien.ac.at>
Modified:
trunk/chipdrivers.h
trunk/flashchips.c
trunk/flashchips.h
trunk/spi25_statusreg.c
Modified: trunk/chipdrivers.h
==============================================================================
--- trunk/chipdrivers.h Sun Nov 22 00:35:47 2015 (r1900)
+++ trunk/chipdrivers.h Sun Nov 22 03:23:31 2015 (r1901)
@@ -72,6 +72,7 @@
int spi_prettyprint_status_register_bp3_srwd(struct flashctx *flash);
int spi_prettyprint_status_register_bp4_srwd(struct flashctx *flash);
int spi_prettyprint_status_register_bp2_bpl(struct flashctx *flash);
+int spi_prettyprint_status_register_bp2_tb_bpl(struct flashctx *flash);
int spi_disable_blockprotect(struct flashctx *flash);
int spi_disable_blockprotect_bp1_srwd(struct flashctx *flash);
int spi_disable_blockprotect_bp2_srwd(struct flashctx *flash);
Modified: trunk/flashchips.c
==============================================================================
--- trunk/flashchips.c Sun Nov 22 00:35:47 2015 (r1900)
+++ trunk/flashchips.c Sun Nov 22 03:23:31 2015 (r1901)
@@ -11857,6 +11857,111 @@
{
.vendor = "SST",
+ .name = "SST25WF020A",
+ .bustype = BUS_SPI,
+ .manufacture_id = SANYO_ID, /* See flashchips.h */
+ .model_id = SST_SST25WF020A,
+ .total_size = 256,
+ .page_size = 256,
+ .feature_bits = FEATURE_WRSR_WREN,
+ .tested = TEST_UNTESTED,
+ .probe = probe_spi_rdid,
+ .probe_timing = TIMING_ZERO,
+ .block_erasers =
+ {
+ {
+ .eraseblocks = { {4 * 1024, 64} },
+ .block_erase = spi_block_erase_20,
+ }, {
+ .eraseblocks = { {64 * 1024, 4} },
+ .block_erase = spi_block_erase_d8,
+ }, {
+ .eraseblocks = { {256 * 1024, 1} },
+ .block_erase = spi_block_erase_60,
+ }, {
+ .eraseblocks = { {256 * 1024, 1} },
+ .block_erase = spi_block_erase_c7,
+ },
+ },
+ .printlock = spi_prettyprint_status_register_bp2_tb_bpl,
+ .unlock = spi_disable_blockprotect_bp2_srwd,
+ .write = spi_chip_write_256,
+ .read = spi_chip_read, /* Fast read (0x0B) supported */
+ .voltage = {1650, 1950},
+ },
+
+ {
+ .vendor = "SST",
+ .name = "SST25WF040B",
+ .bustype = BUS_SPI,
+ .manufacture_id = SANYO_ID, /* See flashchips.h */
+ .model_id = SST_SST25WF040B,
+ .total_size = 512,
+ .page_size = 256,
+ .feature_bits = FEATURE_WRSR_WREN,
+ .tested = TEST_UNTESTED,
+ .probe = probe_spi_rdid,
+ .probe_timing = TIMING_ZERO,
+ .block_erasers =
+ {
+ {
+ .eraseblocks = { {4 * 1024, 128} },
+ .block_erase = spi_block_erase_20,
+ }, {
+ .eraseblocks = { {64 * 1024, 8} },
+ .block_erase = spi_block_erase_d8,
+ }, {
+ .eraseblocks = { {512 * 1024, 1} },
+ .block_erase = spi_block_erase_60,
+ }, {
+ .eraseblocks = { {512 * 1024, 1} },
+ .block_erase = spi_block_erase_c7,
+ },
+ },
+ .printlock = spi_prettyprint_status_register_bp2_tb_bpl,
+ .unlock = spi_disable_blockprotect_bp2_srwd,
+ .write = spi_chip_write_256,
+ .read = spi_chip_read, /* Fast read (0x0B), dual O (0x3B), dual I/O read (0xBB) supported */
+ .voltage = {1650, 1950},
+ },
+
+ {
+ .vendor = "SST",
+ .name = "SST25WF080B",
+ .bustype = BUS_SPI,
+ .manufacture_id = SANYO_ID, /* See flashchips.h */
+ .model_id = SST_SST25WF080B,
+ .total_size = 1024,
+ .page_size = 256,
+ .feature_bits = FEATURE_WRSR_WREN,
+ .tested = TEST_OK_PREW,
+ .probe = probe_spi_rdid,
+ .probe_timing = TIMING_ZERO,
+ .block_erasers =
+ {
+ {
+ .eraseblocks = { {4 * 1024, 256} },
+ .block_erase = spi_block_erase_20,
+ }, {
+ .eraseblocks = { {64 * 1024, 16} },
+ .block_erase = spi_block_erase_d8,
+ }, {
+ .eraseblocks = { {1024 * 1024, 1} },
+ .block_erase = spi_block_erase_60,
+ }, {
+ .eraseblocks = { {1024 * 1024, 1} },
+ .block_erase = spi_block_erase_c7,
+ },
+ },
+ .printlock = spi_prettyprint_status_register_bp2_tb_bpl,
+ .unlock = spi_disable_blockprotect_bp2_srwd,
+ .write = spi_chip_write_256,
+ .read = spi_chip_read, /* Fast read (0x0B), dual O (0x3B), dual I/O read (0xBB) supported */
+ .voltage = {1650, 1950},
+ },
+
+ {
+ .vendor = "SST",
.name = "SST25VF080B",
.bustype = BUS_SPI,
.manufacture_id = SST_ID,
Modified: trunk/flashchips.h
==============================================================================
--- trunk/flashchips.h Sun Nov 22 00:35:47 2015 (r1900)
+++ trunk/flashchips.h Sun Nov 22 03:23:31 2015 (r1901)
@@ -670,11 +670,12 @@
#define SST_SST25WF020 0x2503
#define SST_SST25WF040 0x2504
#define SST_SST25WF080 0x2505
-/* There exist some successors to members of the SST25WF family with alphabetic suffixes. They have very weird
- * IDs and were not spotted in the wild yet. Their datasheets show a 4 byte long response w/o a vendor ID. */
-#define SST_SST25WF020A /* 0x62 0x16 0x12 0x00 */
-#define SST_SST25WF040B /* 0x62 0x16 0x13 0x00 */
-#define SST_SST25WF080B /* 0x62 0x16 0x14 0x00 */
+/* There exist some successors to members of the SST25WF family with alphabetic suffixes. Their datasheets show
+ * a 4 byte long response w/o a vendor ID. The first byte is 0x62 that is actually Sanyo's and might be due to
+ * a collaboration in the mid 2000ies between Sanyo and SST. */
+#define SST_SST25WF020A 0x1612
+#define SST_SST25WF040B 0x1613
+#define SST_SST25WF080B 0x1614
#define SST_SST25VF512_REMS 0x48 /* REMS or RES opcode, same as SST25VF512A */
#define SST_SST25VF010_REMS 0x49 /* REMS or RES opcode, same as SST25VF010A */
#define SST_SST25VF020_REMS 0x43 /* REMS or RES opcode, same as SST25LF020A */
Modified: trunk/spi25_statusreg.c
==============================================================================
--- trunk/spi25_statusreg.c Sun Nov 22 00:35:47 2015 (r1900)
+++ trunk/spi25_statusreg.c Sun Nov 22 03:23:31 2015 (r1901)
@@ -374,6 +374,19 @@
return 0;
}
+int spi_prettyprint_status_register_bp2_tb_bpl(struct flashctx *flash)
+{
+ uint8_t status = spi_read_status_register(flash);
+ spi_prettyprint_status_register_hex(status);
+
+ spi_prettyprint_status_register_bpl(status);
+ spi_prettyprint_status_register_bit(status, 6);
+ msg_cdbg("Chip status register: Top/Bottom (TB) is %s\n", (status & (1 << 5)) ? "bottom" : "top");
+ spi_prettyprint_status_register_bp(status, 2);
+ spi_prettyprint_status_register_welwip(status);
+ return 0;
+}
+
/* === Amic ===
* FIXME: spi_disable_blockprotect is incorrect but works fine for chips using
* spi_prettyprint_status_register_bp1_srwd or
More information about the flashrom
mailing list