[flashrom] BayTrail Soc device 0f1c does not work

[Stefan Tauner]

On Mon, 18 May 2015 09:49:41 +0000
"Hänel-Baas, Alexander" <alexander.haenel-baas at sieb-meyer.de> wrote:

> Hi
> 
> >> Any idea what is going wrong or what can I do to get flashrom to work?
> 
> No ideas what is going wrong?
> 
> Another question is: How I select the Bay Trail Device?
> 
> flashrom -VVV -p internal -c "Bay Trail" -r bios.txt
> Error: Unknown chip 'Bay Trail' specified.
> 
> I have tried Linux 3.14 and 3.18 with fashrom 0.98-r1888
> 
> The complete output (flashrom -VVV -p internal -r b.txt) was:
> 
> Calibrating delay loop... OS timer resolution is 1 usecs, 488M loops per second, 10 myus = 11 us, 100 myus = 100 us, 1000 myus = 1031 us, 10000 myus = 10023 us, 4 myus = 5 us, OK.
> Initializing internal programmer
> No coreboot table found.
> Using Internal DMI decoder.
> page_size=1000
> pre-rounding:  start=0x000f0000, len=0x10000, end=0x00100000
> post-rounding: start=0x000f0000, len=0x10000, end=0x00100000
> page_size=1000
> pre-rounding:  start=0x000e2770, len=0x469, end=0x000e2bd9
> post-rounding: start=0x000e2000, len=0x1000, end=0x000e3000
> DMI string chassis-type: "Hand Held"
> page_size=1000
> pre-rounding:  start=0xb73f8770, len=0x469, end=0xb73f8bd9
> post-rounding: start=0xb73f8000, len=0x1000, end=0xb73f9000
> page_size=1000
> pre-rounding:  start=0xb73f9000, len=0x10000, end=0xb7409000
> post-rounding: start=0xb73f9000, len=0x10000, end=0xb7409000
> Laptop detected via DMI.
> DMI string system-manufacturer: "N/A"
> DMI string system-product-name: "N/A"
> DMI string system-version: "N/A"
> DMI string baseboard-manufacturer: "Kontron Europe GmbH"
> DMI string baseboard-product-name: "COMe-mBTc10"
> DMI string baseboard-version: "A.0.0"
> ========================================================================
> WARNING! You seem to be running flashrom on an unsupported laptop.
> Laptops, notebooks and netbooks are difficult to support and we
> recommend to use the vendor flashing utility. The embedded controller
> (EC) in these machines often interacts badly with flashing.
> See the manpage and http://www.flashrom.org/Laptops for details.
> 
> If flash is shared with the EC, erase is guaranteed to brick your laptop
> and write may brick your laptop.
> Read and probe may irritate your EC and cause fan failure, backlight
> failure and sudden poweroff.
> You have been warned.
> ========================================================================
> Aborting.
> Error: Programmer initialization failed.
> 

Hello again!

The man page tells you how to proceed in this case.
You can not "select" the chipset with the -c parameter but only the
flash chip. All of that is documented...

-- 
Kind regards/Mit freundlichen Grüßen, Stefan Tauner