[flashrom] Macronix MX25U6435F: J1900-D3V) successfully flashed

[Matt Taggart]

Guillermo von Hünefeld writes:
> today I used your tool to flash a MX25U6435F (Main BIOS of my Gigabyte
> J1900-D3V) which used to brocken with an updated BIOS (J190ND3V.F4). All
> "Probe" "Read" "Erease" and "Write" were successful.  Maybe someone could
> update the "Supported hardware" entry. Thanks for building the tool.

Hi Guillermo!

I have this board too, see my original report at

http://www.flashrom.org/pipermail/flashrom/2014-December/013078.html

It's good to hear that write worked, I had not tested that yet (since
I am still working on setting up an external ROM reader/writer to make
backups). I guess since yours was broken anyway there was no risk for
you :) Thanks for confirming!
Now we just need to try coreboot...

Stefan, (or whoever else might commit Guillermo's result)

Note Gigabyte is currently selling 3 similar board models:

GA-J1900N-D3V (rev. 1.x)
http://www.gigabyte.com/products/product-page.aspx?pid=4918#sp

GA-J1900N-D2H (rev. 1.1)
http://www.gigabyte.com/products/product-page.aspx?pid=5049#sp

GA-J1900M-D2P (rev. 1.1)
http://www.gigabyte.com/products/product-page.aspx?pid=5143#sp

(and a whole set of J1800 based ones too)

Thanks,

-- 
Matt Taggart
matt at lackof.org