[flashrom] FAILED: BCRD DVT BOARD (FAB 3)

David Hendricks dhendrix at google.com
Fri May 15 20:42:38 CEST 2015


Hi Mohammed,
With regard to the EC flash failure, please see issue #38103 on the bug
tracker. It might have something to do with the way the EC jumps from one
copy to another.

With regard to the image size mismatch, you may need to specify which SPI
ROM you are targeting using a programmer parameter.

On Wed, May 13, 2015 at 10:49 AM, Ahmed, Mohammed Rizwan <
mohammed.rizwan.ahmed at intel.com> wrote:

>  Hello,
>
>
>
> I was trying to Flash in the ec.bin and Image.bin of the WW-18 BKC,
>
> I get the error as
>
> “EC returned error result code 4
> cros_ec_need_2nd_pass() failed. Stop
> Your Flashchip is in an unknown state.
>
> Contact flashrom at flashrom.org
>
> Donot Reboot or Shutdown”
>
>
>
> When trying to Flash with the DVT PO ec and Image provided with Servo Board
>
> I get the Error as
>
> “Image Size doesn’t match: Stat 4194304 bytes, wanted 524288”
>
>
>
>
>
> I was hoping I could get some help on what to do.
>
>
>
> Thanks
> Mohammed Rizwan Ahmed
>
>
>
> _______________________________________________
> flashrom mailing list
> flashrom at flashrom.org
> http://www.flashrom.org/mailman/listinfo/flashrom
>



-- 
David Hendricks (dhendrix)
Systems Software Engineer, Google Inc.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.flashrom.org/pipermail/flashrom/attachments/20150515/d34ab499/attachment.html>


More information about the flashrom mailing list