[flashrom] PM25LD512-SCE

[Stefan Tauner]

On Mon, 6 Jul 2015 10:27:32 -0300
Oscar Enrique Goñi <ogoni at redimec.com.ar> wrote:

> Hi!
> I'm Oscar, I'm from Argentina. I am trying to program the SPI Flash
> mentioned in the subject. The chip is inside an Industral computer which
> upgrade process failed (OS halted :S). I´m using the AMONTEC Jtagkey
> programmer and following the instructions on
> http://flashrom.org/FT2232SPI_Programmer#Amontec_JTAGkey.2FJTAGkey2.2FJTAGkey-Tiny
> 
> Unfortunately, I am not able to write the chip (I am 99% sure that it is OK)
> 
> I only get:
> iot at iot-MS-7529:~$ flashrom -p ft2232_spi:type=jtagkey -w
> /home/iot/Escritorio/V2H0ET11.BIN
> flashrom v0.9.6.1-r1563 on Linux 3.13.0-32-generic (i686)
> flashrom is free software, get the source code at http://www.flashrom.org
> 
> Calibrating delay loop... OK.
> Found PMC flash chip "unknown PMC SPI chip" (0 kB, SPI) on ft2232_spi.
> ===
> Does the programmer not support the chip? In that case, is there any way to
> add that support?

Hi,

please upgrade flashrom. Support for your chip was added later. If I am
correct and you are using Ubuntu, you can use these packages:
https://launchpad.net/~flashrom-developers/+archive/ubuntu/flashrom-daily

-- 
Kind regards/Mit freundlichen Grüßen, Stefan Tauner