[flashrom] Unknown state report

[Kaloyan Mihaylov]

flashrom.exe -p ft2232_spi:type=arm-usb-tiny-h -
E
flashrom v0.9.6.1-r1704 on Windows 6.1 (x86)
flashrom is free software, get the source code at http://www.flashrom.org

Calibrating delay loop... OK.
Found Winbond flash chip "W25Q64.V" (8192 kB, SPI) on ft2232_spi.
Erasing and writing flash chip... FAILED at 0x00000000! Expected=0xff,
Found=0xe
5, failed byte count from 0x00000000-0x00000fff: 0x9ca
ERASE FAILED!
Reading current flash chip contents... done. FAILED at 0x00008000!
Expected=0xff
, Found=0x85, failed byte count from 0x00008000-0x0000ffff: 0x4bb9
ERASE FAILED!
Reading current flash chip contents... done. FAILED at 0x00008000!
Expected=0xff
, Found=0x85, failed byte count from 0x00000000-0x0000ffff: 0x4cb2
ERASE FAILED!
Reading current flash chip contents... done. FAILED at 0x00050200!
Expected=0xff
, Found=0x00, failed byte count from 0x00000000-0x007fffff: 0x30e
ERASE FAILED!
Reading current flash chip contents... done. FAILED at 0x002e9800!
Expected=0xff
, Found=0x00, failed byte count from 0x00000000-0x007fffff: 0x700
ERASE FAILED!
FAILED!
Your flash chip is in an unknown state.
Please report this on IRC at chat.freenode.net (channel #flashrom) or
mail flashrom at flashrom.org, thanks!
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.flashrom.org/pipermail/flashrom/attachments/20150209/f0817366/attachment.html>