[flashrom] Problems flashing N25Q064A13ESE40E SPI chip

[Ruben Van de Put]

Hello,

I'm having some problems flashing a SPI chip with the BusPirate V3. Writing
the image is successful but verification is not successful.

First try with chip on breadboard and long leads (20-25cm):
http://paste.flashrom.org/view.php?id=2841

Then I shortened the signal leads and soldered them directly on the
BusPirate:
http://paste.flashrom.org/view.php?id=2842

Then I soldered all leads directly on the chip (with an adapter) instead of
using a breadboard:
http://paste.flashrom.org/view.php?id=2844

I also tried lowering the SPI speed to 1 MHz:
http://paste.flashrom.org/view.php?id=2845

Current set-up
[image: Inline afbeelding 1]
[image: Inline afbeelding 2]

Chip datasheet: http://www.farnell.com/datasheets/1674442.pdf
Flash connected in this way: http://flashrom.org/Bus_Pirate

Is there anything else I can try or should I try replacing the flash chip?

Kind regards,
Ruben Van de Put
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.flashrom.org/pipermail/flashrom/attachments/20151211/bc20321b/attachment.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image.png
Type: image/png
Size: 788599 bytes
Desc: not available
URL: <http://www.flashrom.org/pipermail/flashrom/attachments/20151211/bc20321b/attachment.png>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image.png
Type: image/png
Size: 626007 bytes
Desc: not available
URL: <http://www.flashrom.org/pipermail/flashrom/attachments/20151211/bc20321b/attachment-0001.png>