[flashrom] [commit] r1792 - trunk

[repository service]

Author: stefanct
Date: Fri May 16 19:52:04 2014
New Revision: 1792
URL: http://flashrom.org/trac/flashrom/changeset/1792

Log:
AT45DB: fix read functions.

This fixes segfaults on reads (implicit reads on writes too), ouch.
Thanks to The Raven for reporting the problem and testing my patch, and
to Alexander Irenkov for providing a workable fix for it additionally.

There were actually two problems:
1) The loop conditions were bogus which could lead to read errors
   (e.g. on implicit erase verifications).
2) The offset used within the read buffers provided to spi_nbyte_read()
   and memcpy() were not starting at 0 but the offset of the block
   within the flash chip (which has nothing to do with read buffer in
   most cases).

This patch works similarly to Alexander's but is intended to be
more readable.

Signed-off-by: Stefan Tauner <stefan.tauner at alumni.tuwien.ac.at>
Acked-by: Stefan Tauner <stefan.tauner at alumni.tuwien.ac.at>

Modified:
   trunk/at45db.c

Modified: trunk/at45db.c
==============================================================================
--- trunk/at45db.c	Wed May 14 15:19:50 2014	(r1791)
+++ trunk/at45db.c	Fri May 16 19:52:04 2014	(r1792)
@@ -254,14 +254,16 @@
 	 * chunks can cross page boundaries. */
 	const unsigned int max_data_read = flash->pgm->spi.max_data_read;
 	const unsigned int max_chunk = (max_data_read > 0) ? max_data_read : page_size;
-	while (addr < len) {
+	while (len > 0) {
 		unsigned int chunk = min(max_chunk, len);
-		int ret = spi_nbyte_read(flash, at45db_convert_addr(addr, page_size), buf + addr, chunk);
+		int ret = spi_nbyte_read(flash, at45db_convert_addr(addr, page_size), buf, chunk);
 		if (ret) {
 			msg_cerr("%s: error sending read command!\n", __func__);
 			return ret;
 		}
 		addr += chunk;
+		buf += chunk;
+		len -= chunk;
 	}
 
 	return 0;
@@ -283,7 +285,7 @@
 	 * chunks can cross page boundaries. */
 	const unsigned int max_data_read = flash->pgm->spi.max_data_read;
 	const unsigned int max_chunk = (max_data_read > 0) ? max_data_read : page_size;
-	while (addr < len) {
+	while (len > 0) {
 		const unsigned int addr_at45 = at45db_convert_addr(addr, page_size);
 		const unsigned char cmd[] = {
 			AT45DB_READ_ARRAY,
@@ -300,8 +302,10 @@
 			return ret;
 		}
 		/* Copy result without dummy bytes into buf and advance address counter respectively. */
-		memcpy(buf + addr, tmp + 4, chunk - 4);
+		memcpy(buf, tmp + 4, chunk - 4);
 		addr += chunk - 4;
+		buf += chunk - 4;
+		len -= chunk - 4;
 	}
 	return 0;
 }