[flashrom] Detection of MS-7094 as MS-6702E

Stelios Tsampas zeronebones at gmail.com
Thu May 15 06:50:15 CEST 2014


On 2014/05/01 19:21, Stefan Tauner wrote:
> On Mon, 18 Feb 2013 20:55:25 +0200
> Stelios Tsampas <zeronebones at gmail.com> wrote:
>
>> Flashrom detects MS-7094
>> (http://www.msi.com/product/mb/K8T-Neo2-F-V2-0.html)
>>
>> as MS-6702E
>> (http://www.msi.com/product/mb/K8T-Neo2-F--FIR.html)
>>
>> Note: flashrom successfully flashed MS-7094 even though it wasn't
>> detected properly but it couldn't flash MS-6702E as it couldn't find a
>> suitable erase command.
>>
>> Edit: Re-attached proper lspci output
> Been a while, sorry...
> Thanks for your report! I have investigated this issue by looking at
> the original patch that added the board enable for the board with MSI
> PCI IDs of 0x7094, a later patch that added the MS- model number and
> various lspci logs online etc.
>
> I think you are correct that the string printed on the MS-7094 is
> wrong, but the code actually is the right one. This does also explain
> why you found it to work as (un)expected.
>
> I wonder about the second part of your statement though. Do you also
> posses a MS-6702E/MSI K8T-Neo2-F/FIR? If so then I would like to see
> flashrom and lspci -nnv logs of it. The "couldn't find a suitable erase
> command" probably indicates a write protection similar to the MS-7094.
>

Hi, sadly that mobo was rendered unusable because I tried to flash it 
anyways and it failed,
so I ended up returning it for repair. I do not think I have any of the 
flashrom logs or the lspci
output stored somewhere any more.

Sorry for not being more helpful :(




More information about the flashrom mailing list