[flashrom] [PATCH] Support for S25FL164K/S25FL132K

Stefan Tauner stefan.tauner at alumni.tuwien.ac.at
Sun May 4 23:44:27 CEST 2014


On Sat, 3 May 2014 12:59:16 -0400
Nikolay Martynov <mar.kolya at gmail.com> wrote:

> Hi.
> 
>   Yes, I was able to flash that this chip on arduino. I was hesitant
> to change value of .tested field because my setup was somewhat 'wacky'
> - long wires and stuff, and flashing was not very stable. But this
> instability was probably due to
> my setup, not because of code/arduino/chip, so I guess you can change
> it to TEST_OK_PREW.

Ok, understood. There were a few minor error in your patch (unverified
facts copied from S25FL116K/S25FL216K which are actually wrong for the
S25FL116K too and should be fixed later). I hope I have changed things
to the better. I made a few other minor refinements and committed it in
r1786. Thanks again for the patch!

-- 
Kind regards/Mit freundlichen Grüßen, Stefan Tauner




More information about the flashrom mailing list