[flashrom] [PATCH] Support for S25FL164K/S25FL132K

[Nikolay Martynov]

Hi.

  Yes, I was able to flash that this chip on arduino. I was hesitant
to change value of .tested field because my setup was somewhat 'wacky'
- long wires and stuff, and flashing was not very stable. But this
instability was probably due to
my setup, not because of code/arduino/chip, so I guess you can change
it to TEST_OK_PREW.

Thanks.
Nikolay.

2014-05-03 9:00 GMT-04:00 Stefan Tauner <stefan.tauner at alumni.tuwien.ac.at>:
> On Sun,  9 Mar 2014 22:20:23 -0400
> Nikolay Martynov <mar.kolya at gmail.com> wrote:
>
>> * Updated according to manufacturers datasheet
>>   (to the best of my abilities to read it)
>> * Tested with actual S25FL164K via arduino spi
>>
>> Signed-off-by: Nikolay Martynov <mar.kolya at gmail.com>
>
> Hello Nikolay,
>
> thank you very much for the patch; it looks very good on a first
> glance. I need to verify it with the datasheet but I have a small
> nitpick/question before that: You wrote that you have tested the patch
> with the S25FL164K but the .tested field of the respective chip does
> not reflect that. May I assume that the .tested field of the S25FL164K
> should be set to TEST_OK_PREW?
>
> --
> Kind regards/Mit freundlichen Grüßen, Stefan Tauner



-- 
Martynov Nikolay.
Email: mar.kolya at gmail.com