[flashrom] W836xx: MSI 865PE Neo2-PLS (601-6728-100) : flashrom -V

[Glen Christensen]

root at sysresccd /root % flashrom -V -p internal
flashrom v0.9.6.1-r1564 on Linux 3.10.32-std410-i586 (i686)
flashrom is free software, get the source code at
http://www.flashrom.org

flashrom was built with libpci 3.2.1, GCC 4.4.7, little endian
Command line (3 args): flashrom -V -p internal
Calibrating delay loop... OS timer resolution is 1 usecs, 1643M loops
per second, 10 myus = 11 us, 100 myus = 98 us, 1000 myus = 980 us, 10000
myus = 9886 us, 4 myus = 4 us, OK.
Initializing internal programmer
No coreboot table found.
DMI string system-manufacturer: "MICRO-STAR INC."
DMI string system-product-name: "MS-6728"
DMI string system-version: "2.00"
DMI string baseboard-manufacturer: "MICRO-STAR INC."
DMI string baseboard-product-name: "MS-6728"
DMI string baseboard-version: "2.00"
DMI string chassis-type: "Desktop"
Found Winbond Super I/O, id 82
W836xx enter config mode worked or we were already in config mode.
W836xx leave config mode had no effect.
Active config mode, unknown reg 0x20 ID: f7.
Please send the output of "flashrom -V" to 
flashrom at flashrom.org with W836xx: your board name: flashrom -V
as the subject to help us finish support for your Super I/O. Thanks.
Found chipset "Intel ICH5/ICH5R" with PCI ID 8086:24d0. Enabling flash
write... 
BIOS Lock Enable: disabled, BIOS Write Enable: disabled, BIOS_CNTL is
0x0
OK.
The following protocols are supported: FWH.
Probing for Atmel AT49LH002, 256 kB: probe_82802ab: id1 0x38, id2 0x9b,
id1 is normal flash content, id2 is normal flash content
Probing for Intel 82802AB, 512 kB: probe_82802ab: id1 0xff, id2 0xff,
id1 parity violation, id1 is normal flash content, id2 is normal flash
content
Probing for Intel 82802AC, 1024 kB: probe_82802ab: id1 0xff, id2 0xff,
id1 parity violation, id1 is normal flash content, id2 is normal flash
content
Probing for PMC Pm49FL002, 256 kB: probe_jedec_common: id1 0xbf, id2
0x60
Probing for PMC Pm49FL004, 512 kB: probe_jedec_common: id1 0xbf, id2
0x60
Probing for Sharp LHF00L04, 1024 kB: probe_82802ab: id1 0xff, id2 0xff,
id1 parity violation, id1 is normal flash content, id2 is normal flash
content
Probing for SST SST49LF002A/B, 256 kB: probe_jedec_common: id1 0xbf, id2
0x60
Probing for SST SST49LF003A/B, 384 kB: probe_jedec_common: id1 0xbf, id2
0x60
Probing for SST SST49LF004A/B, 512 kB: probe_jedec_common: id1 0xbf, id2
0x60
Found SST flash chip "SST49LF004A/B" (512 kB, FWH) at physical address
0xfff80000.
Lock status for 0x000000 (size 0x010000) is 00, full access
Lock status for 0x010000 (size 0x010000) is 00, full access
Lock status for 0x020000 (size 0x010000) is 00, full access
Lock status for 0x030000 (size 0x010000) is 00, full access
Lock status for 0x040000 (size 0x010000) is 00, full access
Lock status for 0x050000 (size 0x010000) is 00, full access
Lock status for 0x060000 (size 0x010000) is 00, full access
Lock status for 0x070000 (size 0x010000) is 00, full access
Probing for SST SST49LF004C, 512 kB: probe_82802ab: id1 0xff, id2 0xff,
id1 parity violation, id1 is normal flash content, id2 is normal flash
content
Probing for SST SST49LF008A, 1024 kB: probe_jedec_common: id1 0xff, id2
0xff, id1 parity violation, id1 is normal flash content, id2 is normal
flash content
Probing for SST SST49LF008C, 1024 kB: probe_82802ab: id1 0xff, id2 0xff,
id1 parity violation, id1 is normal flash content, id2 is normal flash
content
Probing for SST SST49LF016C, 2048 kB: probe_82802ab: id1 0xff, id2 0xff,
id1 parity violation, id1 is normal flash content, id2 is normal flash
content
Probing for ST M50FLW040A, 512 kB: probe_82802ab: id1 0xff, id2 0xff,
id1 parity violation, id1 is normal flash content, id2 is normal flash
content
Probing for ST M50FLW040B, 512 kB: probe_82802ab: id1 0xff, id2 0xff,
id1 parity violation, id1 is normal flash content, id2 is normal flash
content
Probing for ST M50FLW080A, 1024 kB: probe_82802ab: id1 0xff, id2 0xff,
id1 parity violation, id1 is normal flash content, id2 is normal flash
content
Probing for ST M50FLW080B, 1024 kB: probe_82802ab: id1 0xff, id2 0xff,
id1 parity violation, id1 is normal flash content, id2 is normal flash
content
Probing for ST M50FW002, 256 kB: probe_82802ab: id1 0x38, id2 0x9b, id1
is normal flash content, id2 is normal flash content
Probing for ST M50FW016, 2048 kB: probe_82802ab: id1 0xff, id2 0xff, id1
parity violation, id1 is normal flash content, id2 is normal flash
content
Probing for ST M50FW040, 512 kB: probe_82802ab: id1 0xff, id2 0xff, id1
parity violation, id1 is normal flash content, id2 is normal flash
content
Probing for ST M50FW080, 1024 kB: probe_82802ab: id1 0xff, id2 0xff, id1
parity violation, id1 is normal flash content, id2 is normal flash
content
Probing for Winbond W39V040FA, 512 kB: probe_jedec_common: id1 0xbf, id2
0x60
Probing for Winbond W39V040FB, 512 kB: probe_jedec_common: id1 0xbf, id2
0x60
Probing for Winbond W39V040FC, 512 kB: probe_jedec_common: id1 0xbf, id2
0x60
Probing for Winbond W49V002FA, 256 kB: probe_jedec_common: id1 0xbf, id2
0x60
Probing for Winbond W39V080FA, 1024 kB: probe_jedec_common: id1 0xff,
id2 0xff, id1 parity violation, id1 is normal flash content, id2 is
normal flash content
Probing for Winbond W39V080FA (dual mode), 512 kB: probe_jedec_common:
id1 0xbf, id2 0x60
Found SST flash chip "SST49LF004A/B" (512 kB, FWH).
No operations were specified.
Restoring PCI config space for 00:1f:0 reg 0x4e
root at sysresccd /root %