[flashrom] W836xx: ASUSTeK P4B-M: flashrom -V

[Daniele Forsi]

flashrom v0.9.5.2-r1546 on Linux 3.2.0-4-686-pae (i686)
flashrom is free software, get the source code at http://www.flashrom.org

flashrom was built with libpci 3.1.9, GCC 4.7.1, little endian
Command line (1 args): flashrom -V
Calibrating delay loop... OS timer resolution is 2 usecs, 498M loops
per second, delay more than 10% too short (got 45% of expected delay),
recalculating... 501M loops per second, delay more than 10% too short
(got 46% of expected delay), recalculating... 499M loops per second,
delay more than 10% too short (got 45% of expected delay),
recalculating... 500M loops per second, delay more than 10% too short
(got 45% of expected delay), recalculating... 500M loops per second,
delay loop is unreliable, trying to continue 10 myus = 6 us, 100 myus
= 51 us, 1000 myus = 542 us, 10000 myus = 5043 us, 8 myus = 5 us, OK.
Initializing internal programmer
No coreboot table found.
DMI string system-manufacturer: "CdcPointSpa"
DMI string system-product-name: "System Name"
DMI string system-version: "System Version"
DMI string baseboard-manufacturer: "ASUSTeK Computer INC."
DMI string baseboard-product-name: "P4B-M   "
DMI string baseboard-version: "REV 1.xx"
DMI string chassis-type: "Tower"
W836xx enter config mode worked or we were already in config mode.
W836xx leave config mode had no effect.
Active config mode, unknown reg 0x20 ID: 87.
Please send the output of "flashrom -V" to
flashrom at flashrom.org with W836xx: your board name: flashrom -V
as the subject to help us finish support for your Super I/O. Thanks.
Found ITE Super I/O, ID 0x8708 on port 0x2e
Found chipset "Intel ICH2" with PCI ID 8086:2440. Enabling flash write...
BIOS Lock Enable: disabled, BIOS Write Enable: disabled, BIOS_CNTL is 0x0
OK.
Super I/O ID 0x8708 is not on the list of flash capable controllers.
Disabling flash write protection for board "ASUS P4B266"...
Intel ICH LPC bridge: Raising GPIO22.
OK.
The following protocols are supported: FWH.
Probing for Atmel AT49LH002, 256 kB: probe_82802ab: id1 0x25, id2
0x1e, id1 is normal flash content, id2 is normal flash content
Probing for Intel 82802AB, 512 kB: probe_82802ab: id1 0x25, id2 0x1e,
id1 is normal flash content, id2 is normal flash content
Probing for Intel 82802AC, 1024 kB: probe_82802ab: id1 0xff, id2 0xff,
id1 parity violation, id1 is normal flash content, id2 is normal flash
content
Probing for PMC Pm49FL002, 256 kB: probe_jedec_common: id1 0xbf, id2 0x57
Probing for PMC Pm49FL004, 512 kB: probe_jedec_common: id1 0xbf, id2 0x57
Probing for Sharp LHF00L04, 1024 kB: probe_82802ab: id1 0xff, id2
0xff, id1 parity violation, id1 is normal flash content, id2 is normal
flash content
Probing for SST SST49LF002A/B, 256 kB: probe_jedec_common: id1 0xbf, id2 0x57
Found SST flash chip "SST49LF002A/B" (256 kB, FWH) at physical address
0xfffc0000.
Lock status for 0x000000 (size 0x004000) is 01, write locked
Lock status for 0x004000 (size 0x004000) is 00, full access
Lock status for 0x008000 (size 0x004000) is 01, write locked
Lock status for 0x00c000 (size 0x004000) is 00, full access
Lock status for 0x010000 (size 0x004000) is 01, write locked
Lock status for 0x014000 (size 0x004000) is 00, full access
Lock status for 0x018000 (size 0x004000) is 01, write locked
Lock status for 0x01c000 (size 0x004000) is 00, full access
Lock status for 0x020000 (size 0x004000) is 01, write locked
Lock status for 0x024000 (size 0x004000) is 00, full access
Lock status for 0x028000 (size 0x004000) is 01, write locked
Lock status for 0x02c000 (size 0x004000) is 00, full access
Lock status for 0x030000 (size 0x004000) is 01, write locked
Lock status for 0x034000 (size 0x004000) is 00, full access
Lock status for 0x038000 (size 0x004000) is 01, write locked
Lock status for 0x03c000 (size 0x004000) is 00, full access
Probing for SST SST49LF003A/B, 384 kB: probe_jedec_common: id1 0xbf, id2 0x57
Probing for SST SST49LF004A/B, 512 kB: probe_jedec_common: id1 0xbf, id2 0x57
Probing for SST SST49LF004C, 512 kB: probe_82802ab: id1 0x25, id2
0x1e, id1 is normal flash content, id2 is normal flash content
Probing for SST SST49LF008A, 1024 kB: probe_jedec_common: id1 0xff,
id2 0xff, id1 parity violation, id1 is normal flash content, id2 is
normal flash content
Probing for SST SST49LF008C, 1024 kB: probe_82802ab: id1 0xff, id2
0xff, id1 parity violation, id1 is normal flash content, id2 is normal
flash content
Probing for SST SST49LF016C, 2048 kB: probe_82802ab: id1 0xff, id2
0xff, id1 parity violation, id1 is normal flash content, id2 is normal
flash content
Probing for ST M50FLW040A, 512 kB: probe_82802ab: id1 0x25, id2 0x1e,
id1 is normal flash content, id2 is normal flash content
Probing for ST M50FLW040B, 512 kB: probe_82802ab: id1 0x25, id2 0x1e,
id1 is normal flash content, id2 is normal flash content
Probing for ST M50FLW080A, 1024 kB: probe_82802ab: id1 0xff, id2 0xff,
id1 parity violation, id1 is normal flash content, id2 is normal flash
content
Probing for ST M50FLW080B, 1024 kB: probe_82802ab: id1 0xff, id2 0xff,
id1 parity violation, id1 is normal flash content, id2 is normal flash
content
Probing for ST M50FW002, 256 kB: probe_82802ab: id1 0x25, id2 0x1e,
id1 is normal flash content, id2 is normal flash content
Probing for ST M50FW016, 2048 kB: probe_82802ab: id1 0xff, id2 0xff,
id1 parity violation, id1 is normal flash content, id2 is normal flash
content
Probing for ST M50FW040, 512 kB: probe_82802ab: id1 0x25, id2 0x1e,
id1 is normal flash content, id2 is normal flash content
Probing for ST M50FW080, 1024 kB: probe_82802ab: id1 0xff, id2 0xff,
id1 parity violation, id1 is normal flash content, id2 is normal flash
content
Probing for Winbond W39V040FA, 512 kB: probe_jedec_common: id1 0xbf, id2 0x57
Probing for Winbond W39V040FB, 512 kB: probe_jedec_common: id1 0xbf, id2 0x57
Probing for Winbond W39V040FC, 512 kB: probe_jedec_common: id1 0xbf, id2 0x57
Probing for Winbond W49V002FA, 256 kB: probe_jedec_common: id1 0xbf, id2 0x57
Probing for Winbond W39V080FA, 1024 kB: probe_jedec_common: id1 0xff,
id2 0xff, id1 parity violation, id1 is normal flash content, id2 is
normal flash content
Probing for Winbond W39V080FA (dual mode), 512 kB: probe_jedec_common:
id1 0xbf, id2 0x57
Found SST flash chip "SST49LF002A/B" (256 kB, FWH).
No operations were specified.
Restoring PCI config space for 00:1f:0 reg 0x4e

-- 
Daniele Forsi