[flashrom] Elitegroup GeForce6100SM-M: flashrom -V

Josiah DeWitt jdewitt at marchex.com
Tue Jun 10 20:54:01 CEST 2014


[root at mx ~]# flashrom -V
flashrom v0.9.6.1-r1705 on Linux 3.6.10-4.fc18.x86_64 (x86_64)
flashrom is free software, get the source code at http://www.flashrom.org

flashrom was built with libpci 3.1.10, GCC 4.7.2 20121109 (Red Hat 
4.7.2-8), little endian
Command line (1 args): flashrom -V
Using default programmer "internal".
Calibrating delay loop... OS timer resolution is 2 usecs, 597M loops per 
second, 10 myus = 12 us, 100 myus = 101 us, 1000 myus = 1011 us, 10000 
myus = 10254 us, 8 myus = 10 us, OK.
Initializing internal programmer
No coreboot table found.
DMI string system-manufacturer: " "
DMI string system-product-name: " "
DMI string system-version: " "
DMI string baseboard-manufacturer: " "
DMI string baseboard-product-name: "NF-MCP61"
DMI string baseboard-version: " "
DMI string chassis-type: "Desktop"
Found ITE Super I/O, ID 0x8726 on port 0x2e
Found chipset "NVIDIA MCP61" with PCI ID 10de:03e0. Enabling flash 
write... This chipset is not really supported yet. Guesswork...
ISA/LPC bridge reg 0x8a contents: 0x00, bit 6 is 0, bit 5 is 0
Flash bus type is LPC
Found SMBus device 10de:03eb at 00:01:1
MCP SPI BAR is at 0x00000000
MCP SPI is not used.
Please send the output of "flashrom -V" to flashrom at flashrom.org with
your board name: flashrom -V as the subject to help us finish support 
for your
chipset. Thanks.
OK.
Super I/O ID 0x8726 is not on the list of flash capable controllers.
Enabling full flash access for board "Elitegroup GeForce6100SM-M"... OK.
The following protocols are supported: LPC.
Probing for AMIC A49LF040A, 512 kB: probe_jedec_common: id1 0x9d, id2 0x6e
Probing for Atmel AT49LH002, 256 kB: probe_82802ab: id1 0x85, id2 0x98, 
id1 is normal flash content, id2 is normal flash content
Probing for PMC Pm49FL002, 256 kB: probe_jedec_common: id1 0x9d, id2 0x6e
Probing for PMC Pm49FL004, 512 kB: probe_jedec_common: id1 0x9d, id2 0x6e
Found PMC flash chip "Pm49FL004" (512 kB, LPC, FWH) at physical address 
0xfff80000.
Probing for SST SST49LF020, 256 kB: probe_jedec_common: id1 0x9d, id2 0x6e
Probing for SST SST49LF020A, 256 kB: probe_jedec_common: id1 0x9d, id2 0x6e
Probing for SST SST49LF040, 512 kB: probe_jedec_common: id1 0x9d, id2 0x6e
Probing for SST SST49LF040B, 512 kB: probe_jedec_common: id1 0x9d, id2 0x6e
Probing for SST SST49LF080A, 1024 kB: Chip lacks correct probe timing 
information, using default 10mS/40uS. probe_jedec_common: id1 0xff, id2 
0xff, id1 parity violation, id1 is normal flash content, id2 is normal 
flash content
Probing for SST SST49LF160C, 2048 kB: probe_82802ab: id1 0xff, id2 0xff, 
id1 parity violation, id1 is normal flash content, id2 is normal flash 
content
Probing for ST M50FLW040A, 512 kB: probe_82802ab: id1 0x49, id2 0x4d, 
id1 is normal flash content, id2 is normal flash content
Probing for ST M50FLW040B, 512 kB: probe_82802ab: id1 0x49, id2 0x4d, 
id1 is normal flash content, id2 is normal flash content
Probing for ST M50FLW080A, 1024 kB: probe_82802ab: id1 0xff, id2 0xff, 
id1 parity violation, id1 is normal flash content, id2 is normal flash 
content
Probing for ST M50FLW080B, 1024 kB: probe_82802ab: id1 0xff, id2 0xff, 
id1 parity violation, id1 is normal flash content, id2 is normal flash 
content
Probing for ST M50LPW116, 2048 kB: probe_82802ab: id1 0xff, id2 0xff, 
id1 parity violation, id1 is normal flash content, id2 is normal flash 
content
Probing for Winbond W39V040A, 512 kB: probe_jedec_common: id1 0x9d, id2 0x6e
Probing for Winbond W39V040B, 512 kB: probe_jedec_common: id1 0x9d, id2 0x6e
Probing for Winbond W39V040C, 512 kB: probe_jedec_common: id1 0x9d, id2 0x6e
Probing for Winbond W39V080A, 1024 kB: probe_jedec_common: id1 0xff, id2 
0xff, id1 parity violation, id1 is normal flash content, id2 is normal 
flash content
Probing for Winbond W49V002A, 256 kB: probe_jedec_common: id1 0x9d, id2 0x6e
Found PMC flash chip "Pm49FL004" (512 kB, LPC, FWH).
No operations were specified.
Restoring PCI config space for 00:01:0 reg 0x6d
Restoring PCI config space for 00:01:0 reg 0x90
Restoring PCI config space for 00:01:0 reg 0x8c
Restoring PCI config space for 00:01:0 reg 0x88




More information about the flashrom mailing list