[flashrom] flashrom serprog problem

[Juan Lucero]

Hi, i have installed flashrom 0.9.7 in my acer laptop with ubuntu 12.04 
32 bits. I have a ch341a serial programmer and i am trying to flash a 
windbond 25q64 memory.
I run this:

sudo flashrom -V -f -w bravissimo.abs -p 
serprog:dev=/dev/bus/usb/002/003:19200

and I get this:


flashrom v0.9.7-r1711 on Linux 3.2.0-58-generic-pae (i686) flashrom is 
free software, get the source code athttp://www.flashrom.org 
<http://www.flashrom.org/>flashrom was built with libpci 3.1.8, GCC 
4.6.3, little endian Command line (6 args): flashrom -V -f -w 
bravissimo.abs -p serprog:dev=/dev/bus/usb/002/003:19200 Calibrating 
delay loop... OS timer resolution is 1 usecs, 1995M loops per second, 10 
myus = 11 us, 100 myus = 101 us, 1000 myus = 1007 us, 10000 myus = 10002 
us, 4 Initializing serprog programmer Error: Could not fetch original 
serial port configuration: Inappropriate ioctl for device Error: 
Programmer initialization failed.

Any ideas?

Best Regards.

Juan.
Argentina.-

PS: would you like me to translate flashrom to spanish?

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.flashrom.org/pipermail/flashrom/attachments/20140108/068ece8c/attachment.html>