[flashrom] [PATCH] Added SST25WF080
Stefan Tauner
stefan.tauner at student.tuwien.ac.at
Thu Feb 27 08:00:46 CET 2014
On Wed, 26 Feb 2014 22:24:59 +0000
jharper at iseis.com wrote:
> This patch adds support for the SST25WF080 1 Mbyte SPI flash chip. It
> has been very minimally tested (basically one each read/write/verify),
> on Windows XP with a USB Blaster as the programmer. It worked,
> although it was horribly slow (at least 15 minutes to program 1 MB) -
> but I have not otherwise used this hardware/software combination to
> program anything, so that might be normal.
> - Jason Harper
Hello Jason,
thanks for the patch. It looks good apart from the .tested field which
should be set to TEST_OK_PREW and I'd like to commit it. For that we
need a proper declaration of authorship though. Please see
http://www.coreboot.org/Development_Guidelines#Sign-off_Procedure
Performance was always an issue with the Bus Pirate (especially with
SST chips that required 1-byte writes), but I thought the FT2232-based
programmers to be faster. If flashrom didn't complain about failing
erases or something similar it is probably normal.
--
Kind regards/Mit freundlichen Grüßen, Stefan Tauner
More information about the flashrom
mailing list