[flashrom] [PATCH] Add support for Intel 82599 10G NICs
Stefan Tauner
stefan.tauner at alumni.tuwien.ac.at
Fri Dec 5 23:58:32 CET 2014
On Tue, 2 Dec 2014 18:18:47 -0800
Ed Swierk <eswierk at skyportsystems.com> wrote:
> The Intel 82599 series of 10G Ethernet controllers has a bit-banged SPI
> interface that's register-compatible with the one in the 1G controllers,
> except the register addresses are shifted up by 0x10000. See
> http://www.intel.com/content/www/us/en/ethernet-controllers/82599-10-gbe-controller-datasheet.html.
>
> I tested this with a board that has the 0x10fc device and a Micron M25P40
> SPI flash chip. I filled in device IDs for other 82599 devices per
> https://www-ssl.intel.com/content/www/us/en/ethernet-controllers/82599-10-gbe-controller-spec-update.html
> and lifted the name strings from the PCI SIG device ID registry.
>
> Signed-off-by: Ed Swierk <eswierk at skyportsystems.com>
Hello Ed,
thank you very much for this patch. I have made some small refinements
to the names and added a few other PCI IDs that seem to make sense (and
actually exist). I have committed the result in r1856.
--
Kind regards/Mit freundlichen Grüßen, Stefan Tauner
More information about the flashrom
mailing list