[flashrom] [PATCH] Add support for S25FL128P, S25FL129P and refine it for S25FL128S chips.
Stefan Tauner
stefan.tauner at alumni.tuwien.ac.at
Mon Aug 4 00:46:55 CEST 2014
Additionally to the existing S25FL128S......0 definition this patch
adds S25FL128P......0, S25FL128P......1 and S25FL128S......1, as well as
S25FL129P......0 and S25FL129P......1 definitions.
S25FL12xP seem to be the predecessor families of S25FL128S. All
associated chips can not be distinguished with RDID alone.
Besides the new chips, this patch also fixes the name of the previously
supported S25FL128S model with uniform 256 kB sectors
(S25FL128P......1 not 0) and adds the hybrid sector version (0) as well.
Due to the shared IDs the user has to select the right chip manually
with the -c parameter. To make this even possible, this patch enlarges
the respective array for results to 6.
Signed-off-by: Stefan Tauner <stefan.tauner at alumni.tuwien.ac.at>
---
cli_classic.c | 2 +-
flashchips.c | 182 +++++++++++++++++++++++++++++++++++++++++++++++++++++++++-
flashchips.h | 2 +-
3 files changed, 181 insertions(+), 5 deletions(-)
diff --git a/cli_classic.c b/cli_classic.c
index ee988a3..60b8b88 100644
--- a/cli_classic.c
+++ b/cli_classic.c
@@ -94,7 +94,7 @@ int main(int argc, char *argv[])
unsigned long size;
/* Probe for up to three flash chips. */
const struct flashchip *chip = NULL;
- struct flashctx flashes[3] = {{0}};
+ struct flashctx flashes[6] = {{0}};
struct flashctx *fill_flash;
const char *name;
int namelen, opt, i, j;
diff --git a/flashchips.c b/flashchips.c
index a1166e0..e587b28 100644
--- a/flashchips.c
+++ b/flashchips.c
@@ -10389,7 +10389,69 @@ const struct flashchip flashchips[] = {
{
.vendor = "Spansion",
- .name = "S25FL128S......0", /* uniform 256kB sectors */
+ .name = "S25FL128P......0", /* uniform 64 kB sectors */
+ .bustype = BUS_SPI,
+ .manufacture_id = SPANSION_ID,
+ .model_id = SPANSION_S25FL128,
+ .total_size = 16384,
+ .page_size = 256,
+ .feature_bits = FEATURE_WRSR_WREN,
+ .tested = TEST_UNTESTED,
+ .probe = probe_spi_rdid,
+ .probe_timing = TIMING_ZERO,
+ .block_erasers = {
+ {
+ .eraseblocks = { {64 * 1024, 256} },
+ .block_erase = spi_block_erase_20,
+ }, {
+ .eraseblocks = { {64 * 1024, 256} },
+ .block_erase = spi_block_erase_d8,
+ }, {
+ .eraseblocks = { { 16384 * 1024, 1} },
+ .block_erase = spi_block_erase_60,
+ }, {
+ .eraseblocks = { { 16384 * 1024, 1} },
+ .block_erase = spi_block_erase_c7,
+ }
+ },
+ .printlock = spi_prettyprint_status_register_bp3_srwd,
+ .unlock = spi_disable_blockprotect_bp3_srwd,
+ .write = spi_chip_write_256,
+ .read = spi_chip_read, /* Fast read (0x0B) supported */
+ .voltage = {2700, 3600},
+ },
+
+ {
+ .vendor = "Spansion",
+ .name = "S25FL128P......1", /* uniform 256kB sectors */
+ .bustype = BUS_SPI,
+ .manufacture_id = SPANSION_ID,
+ .model_id = SPANSION_S25FL128,
+ .total_size = 16384,
+ .page_size = 256,
+ .feature_bits = FEATURE_WRSR_WREN,
+ .tested = TEST_UNTESTED,
+ .probe = probe_spi_rdid,
+ .probe_timing = TIMING_ZERO,
+ .block_erasers = {
+ {
+ .eraseblocks = { {256 * 1024, 64} },
+ .block_erase = spi_block_erase_d8,
+ }, {
+ .eraseblocks = { { 16384 * 1024, 1} },
+ .block_erase = spi_block_erase_c7,
+ }
+ },
+ .printlock = spi_prettyprint_status_register_bp2_srwd,
+ .unlock = spi_disable_blockprotect_bp2_srwd,
+ .write = spi_chip_write_256,
+ .read = spi_chip_read, /* Fast read (0x0B) supported */
+ .voltage = {2700, 3600},
+ },
+
+ {
+ .vendor = "Spansion",
+ .name = "S25FL128S......0", /* hybrid: 32 (top or bottom) 4 kB sub-sectors + 64 kB sectors */
.bustype = BUS_SPI,
.manufacture_id = SPANSION_ID,
.model_id = SPANSION_S25FL128,
@@ -10403,9 +10465,46 @@ const struct flashchip flashchips[] = {
.probe_timing = TIMING_ZERO,
.block_erasers = {
{
- .eraseblocks = { {4 * 1024, 4096} },
- .block_erase = spi_block_erase_20,
+ /* FIXME: erase opcodes 20h for (top or bottom) 4 kB parameter sectors only
+ .eraseblocks = {
+ {4 * 1024, 32},
+ {64 * 1024, 254}, // NOP
+ },
+ .block_erase = NULL,
+ }, { */
+ .eraseblocks = { { 64 * 1024, 256} },
+ .block_erase = spi_block_erase_d8,
+ }, {
+ .eraseblocks = { { 16384 * 1024, 1} },
+ .block_erase = spi_block_erase_60,
}, {
+ .eraseblocks = { { 16384 * 1024, 1} },
+ .block_erase = spi_block_erase_c7,
+ }
+ },
+ .printlock = spi_prettyprint_status_register_bp2_ep_srwd, /* TODO: SR2 and many others */
+ .unlock = spi_disable_blockprotect_bp2_srwd, /* TODO: various other locks */
+ .write = spi_chip_write_256, /* Multi I/O supported */
+ .read = spi_chip_read, /* Fast read (0x0B) and multi I/O supported */
+ .voltage = {2700, 3600},
+ },
+
+ {
+ .vendor = "Spansion",
+ .name = "S25FL128S......1", /* uniform 256 kB sectors */
+ .bustype = BUS_SPI,
+ .manufacture_id = SPANSION_ID,
+ .model_id = SPANSION_S25FL128,
+ .total_size = 16384,
+ .page_size = 512,
+ /* supports 4B addressing */
+ /* OTP: 1024B total, 32B reserved; read 0x4B; write 0x42 */
+ .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP,
+ .tested = TEST_UNTESTED,
+ .probe = probe_spi_rdid,
+ .probe_timing = TIMING_ZERO,
+ .block_erasers = {
+ {
.eraseblocks = { {256 * 1024, 64} },
.block_erase = spi_block_erase_d8,
}, {
@@ -10422,6 +10521,83 @@ const struct flashchip flashchips[] = {
.read = spi_chip_read, /* Fast read (0x0B) and multi I/O supported */
.voltage = {2700, 3600},
},
+ {
+ .vendor = "Spansion",
+ .name = "S25FL129P......0", /* hybrid: 32 (top or bottom) 4 kB sub-sectors + 64 kB sectors */
+ .bustype = BUS_SPI,
+ .manufacture_id = SPANSION_ID,
+ .model_id = SPANSION_S25FL128,
+ .total_size = 16384,
+ .page_size = 256,
+ /* OTP: 506B total, 16B reserved; read 0x4B; write 0x42 */
+ .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP,
+ .tested = TEST_UNTESTED,
+ .probe = probe_spi_rdid,
+ .probe_timing = TIMING_ZERO,
+ .block_erasers = {
+ {
+ /* FIXME: erase opcodes 20h for (top or bottom) 4 kB parameter sectors only
+ .eraseblocks = {
+ {4 * 1024, 32},
+ {64 * 1024, 254}, // NOP
+ },
+ .block_erase = NULL,
+ }, { */
+ /* FIXME: erase opcodes 40h for (top or bottom) 2*4 kB parameter sectors only
+ .eraseblocks = {
+ {8 * 1024, 16},
+ {64 * 1024, 254}, // NOP
+ },
+ .block_erase = NULL,
+ }, { */
+ .eraseblocks = { { 64 * 1024, 256} },
+ .block_erase = spi_block_erase_d8,
+ }, {
+ .eraseblocks = { { 16384 * 1024, 1} },
+ .block_erase = spi_block_erase_60,
+ }, {
+ .eraseblocks = { { 16384 * 1024, 1} },
+ .block_erase = spi_block_erase_c7,
+ }
+ },
+ .printlock = spi_prettyprint_status_register_bp2_ep_srwd, /* TODO: Configuration register */
+ .unlock = spi_disable_blockprotect_bp2_srwd,
+ .write = spi_chip_write_256, /* Multi I/O supported */
+ .read = spi_chip_read, /* Fast read (0x0B) and multi I/O supported */
+ .voltage = {2700, 3600},
+ },
+
+ {
+ .vendor = "Spansion",
+ .name = "S25FL128P......1", /* uniform 256 kB sectors */
+ .bustype = BUS_SPI,
+ .manufacture_id = SPANSION_ID,
+ .model_id = SPANSION_S25FL128,
+ .total_size = 16384,
+ .page_size = 512,
+ /* OTP: 506B total, 16B reserved; read 0x4B; write 0x42 */
+ .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP,
+ .tested = TEST_UNTESTED,
+ .probe = probe_spi_rdid,
+ .probe_timing = TIMING_ZERO,
+ .block_erasers = {
+ {
+ .eraseblocks = { {256 * 1024, 64} },
+ .block_erase = spi_block_erase_d8,
+ }, {
+ .eraseblocks = { { 16384 * 1024, 1} },
+ .block_erase = spi_block_erase_60,
+ }, {
+ .eraseblocks = { { 16384 * 1024, 1} },
+ .block_erase = spi_block_erase_c7,
+ }
+ },
+ .printlock = spi_prettyprint_status_register_bp2_ep_srwd, /* TODO: Configuration register */
+ .unlock = spi_disable_blockprotect_bp2_srwd,
+ .write = spi_chip_write_256, /* Multi I/O supported */
+ .read = spi_chip_read, /* Fast read (0x0B) and multi I/O supported */
+ .voltage = {2700, 3600},
+ },
{
.vendor = "SST",
diff --git a/flashchips.h b/flashchips.h
index 029bae8..b2c1d4d 100644
--- a/flashchips.h
+++ b/flashchips.h
@@ -590,7 +590,7 @@
#define SPANSION_S25FL016A 0x0214
#define SPANSION_S25FL032A 0x0215 /* Same as S25FL032P, but the latter supports EDI and CFI */
#define SPANSION_S25FL064A 0x0216 /* Same as S25FL064P, but the latter supports EDI and CFI */
-#define SPANSION_S25FL128 0x2018
+#define SPANSION_S25FL128 0x2018 /* Same ID for various S25FL128P, S25FL128S and S25FL129P (including dual-die S70FL256P) variants (EDI supported) */
#define SPANSION_S25FL256 0x0219
#define SPANSION_S25FL512 0x0220
#define SPANSION_S25FL204 0x4013
--
Kind regards, Stefan Tauner
More information about the flashrom
mailing list