[flashrom] FAILED pl8820

Владимир Пчелинцев pchelintsev at jet.msk.su
Tue Apr 8 00:55:07 CEST 2014


Hi i try to update BIOS on my PL8820 and see this error
Extracting image
Running install.sh

BIOS upgrade from B272 to B282.

*** IMPORTANT ***

The upgrade will try and power cycle the system the next time a reboot is
scheduled. It's highly recommended to reboot the system after the upgrade
is done.

Type 'yes' to proceed with BIOS upgrade, or 'no' to abort: yes
flashrom v0.9.6.1-r1627 on Linux 3.4.18-pl-xeon-plos_64 (x86_64)
flashrom is free software, get the source code at http://www.flashrom.org

Calibrating delay loop... OK.
Found chipset "Intel ICH10R". Enabling flash write... OK.
Found SST flash chip "SST25VF016B" (2048 kB, SPI) at physical address 
0xffe00000 .
Reading old flash chip contents... done.
Erasing and writing flash chip... Erase/write done.
Verifying flash... FAILED at 0x00040030! Expected=0xc3, Found=0xcb, 
failed byte count from 0x00000000-0x001fffff: 0x1a3
Your flash chip is in an unknown state.
Get help on IRC at chat.freenode.net (channel #flashrom) or
mail flashrom at flashrom.org with the subject "FAILED: <your board name>"!
-------------------------------------------------------------------------------
DO NOT REBOOT OR POWEROFF!
install_firmware: Installation aborted
Firmware upgrade failed
How to fix it.
And more sadly we are power cycle this machine, how to make his alive again.
Thanks

-- 
Thank you
Vladimir Pchelintsev
Jet Infosystems
Moscow, Russia
+7 495 411 7601 ext. 1957
mobile: +7 9169645467





More information about the flashrom mailing list